[Fri Aug  3 10:26:18 2012] Detection parameters:
  Position = (297.8, 275.8) = 14 9 23.96 26 18 22.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10168.9 +/- 118.8
  Background counts = 12.9
  Rate = 0.3 +/- 0.003

[Fri Aug  3 10:26:19 2012] Off-axis axis estimate = 1.64'
[Fri Aug  3 14:53:47 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 14:53:47 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Fri Aug  3 14:53:47 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Fri Aug  3 14:53:47 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Fri Aug  3 15:52:54 2012] fullrun_mos2_xmm0092850501_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug  3 15:52:54 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0092850501_pi300-10000_cl_pass0_src1.csv
[Fri Aug  3 15:52:54 2012] fullrun_mos2_xmm0092850501_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug  3 15:52:54 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0092850501_pi300-10000_cl_pass0_src1.csv
[Fri Aug  3 15:52:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0092850501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0092850501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 15:52:55 2012] fullrun_mos2_xmm0092850501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug  3 15:52:55 2012] fullrun_mos2_xmm0092850501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug  3 15:52:55 2012] Fit fullrun_mos2_xmm0092850501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug  3 15:53:26 2012] Spatial fit model total counts = 9435.330000, observed total counts = 9242.000000
[Fri Aug  3 15:53:26 2012] Offset between fit and detection position for source 7 = 0.159310 pixels
[Fri Aug  3 15:53:26 2012] 9380.160000 total counts/ 2271.720000 bgd. counts: snr = 149.140949
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.159310 pixels
  Position = (297.8, 275.6) = 14 9 23.95 26 18 22.1
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 7108.4 +/- 96.9
  Background counts = 2271.7
  Rate = 0.2 +/- 0.002
[Fri Aug  3 15:53:26 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 15:53:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 15:53:26 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 15:53:26 2012] Source does appear to be extended
[Fri Aug  3 15:53:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 19:21:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 19:21:08 2012] Initial guess for spatial extent in simple fitting = 5.34"
[Fri Aug  3 19:21:08 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.006
[Fri Aug  3 19:21:08 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.34"
[Fri Aug  3 20:10:38 2012] fullrun_mos2_xmm0092850501_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug  3 20:10:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092850501_pi300-10000_cl_pass1_src1.csv
[Fri Aug  3 20:10:38 2012] fullrun_mos2_xmm0092850501_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug  3 20:10:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092850501_pi300-10000_cl_pass1_src1.csv
[Fri Aug  3 20:10:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0092850501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0092850501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 20:10:38 2012] fullrun_mos2_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug  3 20:10:38 2012] fullrun_mos2_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug  3 20:10:38 2012] Fit fullrun_mos2_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug  3 20:11:05 2012] Spatial fit model total counts = 9384.740000, observed total counts = 9243.000000
[Fri Aug  3 20:11:05 2012] Offset between fit and detection position for source 7 = 0.021186 pixels
[Fri Aug  3 20:11:05 2012] 9418.510000 total counts/ 2292.810000 bgd. counts: snr = 148.813901
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.021186 pixels
  Position = (297.8, 275.6) = 14 9 23.95 26 18 22.0
  Extent = 5.4 (5.2-5.4)", rotation angle = 0
  Source counts = 7125.7 +/- 97.0
  Background counts = 2292.8
  Rate = 0.2 +/- 0.002
[Fri Aug  3 20:11:05 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 20:11:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 20:11:05 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 20:11:05 2012] Source does appear to be extended
[Fri Aug  3 20:11:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 23:21:58 2012] Counts = 7125.700000, rescaling region sizes by 2.000000
[Fri Aug  3 23:21:58 2012] XMMSAS src. selection expression = ellipse(25863.187600, 23929.964600, 642.469218, 642.469218, 0.000000, X, Y)
[Fri Aug  3 23:21:58 2012] Writing source region out to fullrun_mos2_xmm0092850501_pi300-10000_pass1_cl_src7_src.reg
[Fri Aug  3 23:21:58 2012] Extracting stamp from image fullrun_mos2_xmm0092850501_pi300-10000_cl_sm2.00.img.gz, (261, 239) - (335, 313)
[Fri Aug  3 23:21:58 2012] XMMSAS bgd. selection expression = annulus(25863.187600, 23929.964600, 2141.564062, 4283.128123, X, Y) && !ellipse(22367.784912, 21762.456818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30326.780000, 26672.640000, 321.393609, 321.393609, 0.000000, X, Y) && !ellipse(30644.092682, 26118.868713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24905.082245, 23539.983002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24733.639038, 27000.226929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25042.777374, 24905.188446, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug  3 23:21:58 2012] Writing fullrun_mos2_xmm0092850501_pi300-10000_pass1_cl_src7.gif
[Fri Aug  3 23:22:01 2012] Mean detx,y = (-45.13, -77.14) 
[Fri Aug  3 23:22:02 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug  3 23:22:16 2012] Binned source spectrum to 10 counts/bin
[Fri Aug  3 23:22:16 2012] Setting source spectrum file to fullrun_mos2_xmm0092850501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Aug  3 23:22:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0092850501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Aug  3 23:45:41 2012] Updating aperture counts using extracted products
[Fri Aug  3 23:45:41 2012] Error reading totcts from fullrun_mos2_xmm0092850501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Aug  3 23:45:41 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 23:45:41 2012] Using photon index=1.80, rate=0.172, arf fullrun_mos2_xmm0092850501_pi300-10000_pass1_cl_src7.arf
[Fri Aug  3 23:45:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 23:45:41 2012] Updating source flux to 1.8e-12
[Fri Aug  3 23:46:47 2012] Reading fit data from xmm0092850501/analysis//spectral/fullrun_mos2_xmm0092850501_pi300-10000_pass1_cl_src7_pl.csv
[Fri Aug  3 23:46:47 2012] Spectral fit parameter nH value = 2.15793e+20
[Fri Aug  3 23:46:47 2012] Spectral fit parameter PhoIndex value = 2.26635
[Fri Aug  3 23:46:47 2012] Failed to get F(0.3-8.0) from xmm0092850501/analysis//spectral/fullrun_mos2_xmm0092850501_pi300-10000_pass1_cl_src7_pl.csv, possibly due to different flux energy range selected
[Fri Aug  3 23:46:47 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 23:46:47 2012] Using Nh = 2.2e+20, photon index=2.27, rate=0.172, arf fullrun_mos2_xmm0092850501_pi300-10000_pass1_cl_src7.arf
[Fri Aug  3 23:46:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 23:46:47 2012] Updating source flux to 1.5e-12