[Fri Aug  3 10:26:17 2012] Detection parameters:
  Position = (306.6, 210.3) = 14 9 21.13 26 13 38.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 477.7 +/- 26.8
  Background counts = 14.3
  Rate = 0.01 +/- 0.0008

[Fri Aug  3 10:26:19 2012] Off-axis axis estimate = 6.42'
[Fri Aug  3 14:53:47 2012] Using EEF radius (= 9.64 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 14:53:47 2012] Initial guess for spatial extent in simple fitting = 9.64"
[Fri Aug  3 14:53:47 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.848
[Fri Aug  3 14:53:47 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.64"
[Fri Aug  3 15:52:54 2012] fullrun_mos2_xmm0092850501_pi300-10000_cl_pass0_src2.ximg exists
[Fri Aug  3 15:52:54 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0092850501_pi300-10000_cl_pass0_src2.csv
[Fri Aug  3 15:52:54 2012] fullrun_mos2_xmm0092850501_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Aug  3 15:52:54 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0092850501_pi300-10000_cl_pass0_src2.csv
[Fri Aug  3 15:52:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0092850501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0092850501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 15:52:55 2012] fullrun_mos2_xmm0092850501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Aug  3 15:52:55 2012] fullrun_mos2_xmm0092850501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Aug  3 15:52:55 2012] Fit fullrun_mos2_xmm0092850501_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Aug  3 15:53:26 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.625509 pixels away
[Fri Aug  3 15:53:26 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 15:53:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 15:53:26 2012] Assessing source extent using major
[Fri Aug  3 15:53:26 2012] Source does appear to be extended
[Fri Aug  3 15:53:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 19:21:08 2012] Using EEF radius (= 9.64 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 19:21:08 2012] Initial guess for spatial extent in simple fitting = 9.64"
[Fri Aug  3 19:21:08 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.848
[Fri Aug  3 19:21:08 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 9.64"
[Fri Aug  3 20:10:38 2012] fullrun_mos2_xmm0092850501_pi300-10000_cl_pass1_src2.ximg exists
[Fri Aug  3 20:10:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092850501_pi300-10000_cl_pass1_src2.csv
[Fri Aug  3 20:10:38 2012] fullrun_mos2_xmm0092850501_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Aug  3 20:10:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092850501_pi300-10000_cl_pass1_src2.csv
[Fri Aug  3 20:10:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0092850501_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0092850501_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 20:10:38 2012] fullrun_mos2_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Aug  3 20:10:38 2012] fullrun_mos2_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Aug  3 20:10:38 2012] Fit fullrun_mos2_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Aug  3 20:11:05 2012] Spatial fit model total counts = 634.149000, observed total counts = 627.000000
[Fri Aug  3 20:11:05 2012] Offset between fit and detection position for source 3 = 0.350840 pixels
[Fri Aug  3 20:11:05 2012] 628.330000 total counts/ 289.570000 bgd. counts: snr = 19.907437
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.350840 pixels
  Position = (306.5, 210.6) = 14 9 21.14 26 13 39.3
  Extent = 5.6 (5.2-6.3)", rotation angle = 0
  Source counts = 338.8 +/- 25.1
  Background counts = 289.6
  Rate = 0.008 +/- 0.0006
[Fri Aug  3 20:11:05 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 20:11:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 20:11:05 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 20:11:05 2012] Source does appear to be extended
[Fri Aug  3 20:11:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 23:21:58 2012] XMMSAS src. selection expression = ellipse(26621.327000, 18276.162800, 337.749610, 337.749610, 0.000000, X, Y)
[Fri Aug  3 23:21:58 2012] Writing source region out to fullrun_mos2_xmm0092850501_pi300-10000_pass1_cl_src3_src.reg
[Fri Aug  3 23:21:58 2012] Extracting stamp from image fullrun_mos2_xmm0092850501_pi300-10000_cl_sm2.00.img.gz, (287, 191) - (326, 230)
[Fri Aug  3 23:21:58 2012] XMMSAS bgd. selection expression = annulus(26621.327000, 18276.162800, 562.916016, 1125.832032, X, Y)
[Fri Aug  3 23:21:58 2012] Writing fullrun_mos2_xmm0092850501_pi300-10000_pass1_cl_src3.gif
[Fri Aug  3 23:22:19 2012] Mean detx,y = (-2854.77, 4886.55) 
[Fri Aug  3 23:22:20 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug  3 23:22:27 2012] Binned source spectrum to 10 counts/bin
[Fri Aug  3 23:22:27 2012] Setting source spectrum file to fullrun_mos2_xmm0092850501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Aug  3 23:22:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0092850501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Aug  3 23:45:41 2012] Updating aperture counts using extracted products
[Fri Aug  3 23:45:41 2012] Error reading totcts from fullrun_mos2_xmm0092850501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Aug  3 23:45:41 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 23:45:41 2012] Using photon index=1.80, rate=0.00818, arf fullrun_mos2_xmm0092850501_pi300-10000_pass1_cl_src3.arf
[Fri Aug  3 23:45:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 23:45:41 2012] Updating source flux to 1.2e-13