[Fri Aug  3 10:25:15 2012] Detection parameters:
  Position = (333.6, 184.3) = 14 9 12.39 26 11 45.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 336.9 +/- 22.8
  Background counts = 12.9
  Rate = 0.01 +/- 0.0008

[Fri Aug  3 10:25:17 2012] Off-axis axis estimate = 8.66'
[Fri Aug  3 13:57:08 2012] Using EEF radius (= 10.76 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 13:57:08 2012] Initial guess for spatial extent in simple fitting = 10.76"
[Fri Aug  3 13:57:08 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.018
[Fri Aug  3 13:57:08 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.76"
[Fri Aug  3 14:53:46 2012] fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_src5.ximg exists
[Fri Aug  3 14:53:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_src5.csv
[Fri Aug  3 14:53:46 2012] fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Aug  3 14:53:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_src5.csv
[Fri Aug  3 14:53:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 14:53:47 2012] fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Aug  3 14:53:47 2012] fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Aug  3 14:53:47 2012] Fit fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Aug  3 15:53:19 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 14.045002 pixels away
[Fri Aug  3 15:53:19 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 15:53:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 15:53:19 2012] Assessing source extent using major
[Fri Aug  3 15:53:19 2012] Source does appear to be extended
[Fri Aug  3 15:53:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 18:36:55 2012] Using EEF radius (= 10.76 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 18:36:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug  3 18:36:55 2012] Initial guess for spatial extent in simple fitting = 10.76"
[Fri Aug  3 18:36:55 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.018
[Fri Aug  3 18:36:55 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.76"
[Fri Aug  3 19:21:08 2012] fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_src5.ximg exists
[Fri Aug  3 19:21:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_src5.csv
[Fri Aug  3 19:21:08 2012] fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Aug  3 19:21:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_src5.csv
[Fri Aug  3 19:21:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 19:21:08 2012] fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Aug  3 19:21:08 2012] fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Aug  3 19:21:08 2012] Fit fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Aug  3 20:11:00 2012] Spatial fit model total counts = 444.444000, observed total counts = 446.000000
[Fri Aug  3 20:11:00 2012] Offset between fit and detection position for source 8 = 0.180669 pixels
[Fri Aug  3 20:11:00 2012] 442.853000 total counts/ 194.093000 bgd. counts: snr = 17.855648
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.180669 pixels
  Position = (333.7, 184.5) = 14 9 12.38 26 11 45.5
  Extent = 5.9 (5.2-6.6)", rotation angle = 0
  Source counts = 248.8 +/- 21.0
  Background counts = 194.1
  Rate = 0.006 +/- 0.0005
[Fri Aug  3 20:11:00 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 20:11:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 20:11:00 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 20:11:00 2012] Source does appear to be extended
[Fri Aug  3 20:11:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 22:44:07 2012] XMMSAS src. selection expression = ellipse(28980.069800, 16000.367200, 354.923410, 354.923410, 0.000000, X, Y)
[Fri Aug  3 22:44:07 2012] Writing source region out to fullrun_mos1_xmm0092850501_pi300-10000_pass1_cl_src8_src.reg
[Fri Aug  3 22:44:07 2012] Extracting stamp from image fullrun_mos1_xmm0092850501_pi300-10000_cl_sm2.00.img.gz, (313, 164) - (354, 205)
[Fri Aug  3 22:44:07 2012] XMMSAS bgd. selection expression = annulus(28980.069800, 16000.367200, 591.539017, 1183.078034, X, Y)
[Fri Aug  3 22:44:07 2012] Writing fullrun_mos1_xmm0092850501_pi300-10000_pass1_cl_src8.gif
[Fri Aug  3 22:45:17 2012] Mean detx,y = (8327.90, 2220.97) 
[Fri Aug  3 22:45:18 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug  3 22:45:26 2012] Binned source spectrum to 10 counts/bin
[Fri Aug  3 22:45:26 2012] Setting source spectrum file to fullrun_mos1_xmm0092850501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Aug  3 22:45:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0092850501_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri Aug  3 23:45:40 2012] Updating aperture counts using extracted products
[Fri Aug  3 23:45:40 2012] Error reading totcts from fullrun_mos1_xmm0092850501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Aug  3 23:45:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 23:45:40 2012] Using photon index=1.80, rate=0.00601, arf fullrun_mos1_xmm0092850501_pi300-10000_pass1_cl_src8.arf
[Fri Aug  3 23:45:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 23:45:40 2012] Updating source flux to 1e-13