[Fri Aug  3 10:25:14 2012] Detection parameters:
  Position = (438.8, 258.8) = 14 8 38.35 26 17 6.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 147.1 +/- 15.4
  Background counts = 11.3
  Rate = 0.004 +/- 0.0004

[Fri Aug  3 10:25:17 2012] Off-axis axis estimate = 10.58'
[Fri Aug  3 13:57:08 2012] Using EEF radius (= 11.72 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 13:57:08 2012] Initial guess for spatial extent in simple fitting = 11.72"
[Fri Aug  3 13:57:08 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.882
[Fri Aug  3 13:57:08 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 11.72"
[Fri Aug  3 14:53:46 2012] fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_src13.ximg exists
[Fri Aug  3 14:53:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_src13.csv
[Fri Aug  3 14:53:46 2012] fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Aug  3 14:53:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_src13.csv
[Fri Aug  3 14:53:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 14:53:47 2012] fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Aug  3 14:53:47 2012] fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Aug  3 14:53:47 2012] Fit fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Aug  3 15:53:19 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.821457 pixels away
[Fri Aug  3 15:53:19 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 15:53:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 15:53:19 2012] Assessing source extent using major
[Fri Aug  3 15:53:19 2012] Source does appear to be extended
[Fri Aug  3 15:53:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 18:36:55 2012] Using EEF radius (= 11.72 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 18:36:55 2012] Initial guess for spatial extent in simple fitting = 11.72"
[Fri Aug  3 18:36:55 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.882
[Fri Aug  3 18:36:55 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 11.72"
[Fri Aug  3 19:21:08 2012] fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_src13.ximg exists
[Fri Aug  3 19:21:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_src13.csv
[Fri Aug  3 19:21:08 2012] fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Aug  3 19:21:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_src13.csv
[Fri Aug  3 19:21:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 19:21:08 2012] fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Aug  3 19:21:08 2012] fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Aug  3 19:21:08 2012] Fit fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Aug  3 20:11:00 2012] Spatial fit model total counts = 238.998000, observed total counts = 239.000000
[Fri Aug  3 20:11:00 2012] Offset between fit and detection position for source 3 = 0.350593 pixels
[Fri Aug  3 20:11:00 2012] 240.579000 total counts/ 137.715000 bgd. counts: snr = 8.765421
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.350593 pixels
  Position = (438.6, 258.5) = 14 8 38.43 26 17 7.2
  Extent = 6.0 (4.9-7.6)", rotation angle = 0
  Source counts = 102.9 +/- 15.5
  Background counts = 137.7
  Rate = 0.002 +/- 0.0004
[Fri Aug  3 20:11:00 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 20:11:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 20:11:00 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 20:11:00 2012] Source does appear to be extended
[Fri Aug  3 20:11:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 22:44:08 2012] XMMSAS src. selection expression = ellipse(38109.326400, 22442.357000, 362.426410, 362.426410, 0.000000, X, Y)
[Fri Aug  3 22:44:08 2012] Writing source region out to fullrun_mos1_xmm0092850501_pi300-10000_pass1_cl_src3_src.reg
[Fri Aug  3 22:44:08 2012] Extracting stamp from image fullrun_mos1_xmm0092850501_pi300-10000_cl_sm2.00.img.gz, (418, 238) - (459, 279)
[Fri Aug  3 22:44:08 2012] XMMSAS bgd. selection expression = annulus(38109.326400, 22442.357000, 604.044017, 1208.088035, X, Y)
[Fri Aug  3 22:44:08 2012] Writing fullrun_mos1_xmm0092850501_pi300-10000_pass1_cl_src3.gif
[Fri Aug  3 22:46:57 2012] Mean detx,y = (8759.66, -8936.30) 
[Fri Aug  3 22:46:57 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug  3 22:47:03 2012] Binned source spectrum to 10 counts/bin
[Fri Aug  3 22:47:03 2012] Setting source spectrum file to fullrun_mos1_xmm0092850501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Aug  3 22:47:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0092850501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Aug  3 23:45:40 2012] Updating aperture counts using extracted products
[Fri Aug  3 23:45:40 2012] Error reading totcts from fullrun_mos1_xmm0092850501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Aug  3 23:45:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 23:45:40 2012] Using photon index=1.80, rate=0.00248, arf fullrun_mos1_xmm0092850501_pi300-10000_pass1_cl_src3.arf
[Fri Aug  3 23:45:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 23:45:40 2012] Updating source flux to 6.2e-14