[Fri Aug  3 10:25:14 2012] Detection parameters:
  Position = (297.8, 275.2) = 14 9 23.95 26 18 21.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10432.3 +/- 122.3
  Background counts = 13.7
  Rate = 0.3 +/- 0.003

[Fri Aug  3 10:25:17 2012] Off-axis axis estimate = 1.68'
[Fri Aug  3 13:57:08 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 13:57:08 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Fri Aug  3 13:57:08 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Fri Aug  3 13:57:08 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Fri Aug  3 14:53:46 2012] fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug  3 14:53:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_src1.csv
[Fri Aug  3 14:53:46 2012] fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug  3 14:53:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_src1.csv
[Fri Aug  3 14:53:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 14:53:47 2012] fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug  3 14:53:47 2012] fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug  3 14:53:47 2012] Fit fullrun_mos1_xmm0092850501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug  3 15:53:19 2012] Spatial fit model total counts = 9371.560000, observed total counts = 9362.000000
[Fri Aug  3 15:53:19 2012] Offset between fit and detection position for source 1 = 0.189975 pixels
[Fri Aug  3 15:53:19 2012] 9349.640000 total counts/ 2233.440000 bgd. counts: snr = 150.577818
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.189975 pixels
  Position = (297.9, 275.4) = 14 9 23.94 26 18 21.2
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 7116.2 +/- 96.7
  Background counts = 2233.4
  Rate = 0.2 +/- 0.002
[Fri Aug  3 15:53:19 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 15:53:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 15:53:19 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 15:53:19 2012] Source does appear to be extended
[Fri Aug  3 15:53:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 15:53:19 2012] Source is confused with source 10
[Fri Aug  3 18:36:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 18:36:55 2012] Initial guess for spatial extent in simple fitting = 5.42"
[Fri Aug  3 18:36:55 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.983
[Fri Aug  3 18:36:55 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.42"
[Fri Aug  3 19:21:08 2012] fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug  3 19:21:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_src1.csv
[Fri Aug  3 19:21:08 2012] fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug  3 19:21:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_src1.csv
[Fri Aug  3 19:21:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 19:21:08 2012] fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug  3 19:21:08 2012] fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug  3 19:21:08 2012] Fit fullrun_mos1_xmm0092850501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug  3 20:11:00 2012] Spatial fit model total counts = 9385.160000, observed total counts = 9387.000000
[Fri Aug  3 20:11:00 2012] Offset between fit and detection position for source 1 = 0.003611 pixels
[Fri Aug  3 20:11:00 2012] 9061.760000 total counts/ 2002.410000 bgd. counts: snr = 157.756845
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.003611 pixels
  Position = (297.9, 275.4) = 14 9 23.94 26 18 21.2
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 7059.4 +/- 95.2
  Background counts = 2002.4
  Rate = 0.2 +/- 0.002
[Fri Aug  3 20:11:00 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 20:11:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 20:11:00 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 20:11:00 2012] Source does appear to be extended
[Fri Aug  3 20:11:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 22:44:07 2012] Counts = 7059.350000, rescaling region sizes by 2.000000
[Fri Aug  3 22:44:07 2012] XMMSAS src. selection expression = ellipse(25866.964000, 23912.864600, 644.812819, 644.812819, 0.000000, X, Y)
[Fri Aug  3 22:44:07 2012] Writing source region out to fullrun_mos1_xmm0092850501_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug  3 22:44:07 2012] Extracting stamp from image fullrun_mos1_xmm0092850501_pi300-10000_cl_sm2.00.img.gz, (261, 238) - (335, 312)
[Fri Aug  3 22:44:07 2012] XMMSAS bgd. selection expression = annulus(25866.964000, 23912.864600, 2149.376062, 4298.752124, X, Y) && !ellipse(22373.461365, 21763.655563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30325.311140, 26665.900800, 303.860809, 303.860809, 0.000000, X, Y) && !ellipse(25253.544000, 23861.873000, 1192.864034, 1192.864034, 0.000000, X, Y) && !ellipse(30121.758148, 18764.432251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27056.787018, 23951.119598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24199.205536, 26483.035187, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug  3 22:44:07 2012] Writing fullrun_mos1_xmm0092850501_pi300-10000_pass1_cl_src1.gif
[Fri Aug  3 22:44:11 2012] Mean detx,y = (153.31, -105.86) 
[Fri Aug  3 22:44:12 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug  3 22:44:27 2012] Binned source spectrum to 10 counts/bin
[Fri Aug  3 22:44:27 2012] Setting source spectrum file to fullrun_mos1_xmm0092850501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug  3 22:44:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0092850501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Aug  3 23:45:40 2012] Updating aperture counts using extracted products
[Fri Aug  3 23:45:40 2012] Error reading totcts from fullrun_mos1_xmm0092850501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug  3 23:45:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 23:45:40 2012] Using photon index=1.80, rate=0.17, arf fullrun_mos1_xmm0092850501_pi300-10000_pass1_cl_src1.arf
[Fri Aug  3 23:45:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 23:45:40 2012] Updating source flux to 1.6e-12
[Fri Aug  3 23:45:43 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Fri Aug  3 23:46:26 2012] Reading fit data from xmm0092850501/analysis//spectral/fullrun_mos1_xmm0092850501_pi300-10000_pass1_cl_src1_pl.csv
[Fri Aug  3 23:46:26 2012] Spectral fit parameter nH value = 1.56217e+20
[Fri Aug  3 23:46:26 2012] Spectral fit parameter PhoIndex value = 2.24711
[Fri Aug  3 23:46:26 2012] Failed to get F(0.3-8.0) from xmm0092850501/analysis//spectral/fullrun_mos1_xmm0092850501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Aug  3 23:46:26 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 23:46:26 2012] Using Nh = 1.6e+20, photon index=2.25, rate=0.17, arf fullrun_mos1_xmm0092850501_pi300-10000_pass1_cl_src1.arf
[Fri Aug  3 23:46:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 23:46:26 2012] Updating source flux to 1.4e-12