[Sat Jun 22 01:32:55 2013] Detection parameters:
  Position = (470.3, 190.6) = 21 36 48.08 -14 39 47.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.4 +/- 15.7
  Background counts = 61.6
  Rate = 0.002 +/- 0.0003

[Sat Jun 22 01:32:55 2013] Off-axis axis estimate = 14.71'
[Sat Jun 22 01:38:15 2013] Using EEF radius (= 13.78 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 01:38:15 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 22 01:38:15 2013] Initial guess for spatial extent in simple fitting = 13.78"
[Sat Jun 22 01:38:15 2013] source mask rpix=3.2, npix_max = 53, mask sum = 34, frac = 0.632
[Sat Jun 22 01:38:15 2013] Giving source the simple spatial ID 53 for pass 0, mean size = 13.78"
[Sat Jun 22 04:07:58 2013] fullrun_pn_xmm0092850201_pi300-10000_cl_pass0_src53.ximg exists
[Sat Jun 22 04:07:58 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0092850201_pi300-10000_cl_pass0_src53.csv
[Sat Jun 22 04:07:58 2013] fullrun_pn_xmm0092850201_pi300-10000_cl_pass0_src53_1.ximg exists
[Sat Jun 22 04:07:58 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0092850201_pi300-10000_cl_pass0_src53.csv
[Sat Jun 22 04:07:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092850201_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092850201_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 04:07:59 2013] fullrun_pn_xmm0092850201_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Sat Jun 22 04:07:59 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0092850201_pi300-10000_cl_pass0_tfrozen_src53.csv
[Sat Jun 22 04:07:59 2013] fullrun_pn_xmm0092850201_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Sat Jun 22 04:07:59 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0092850201_pi300-10000_cl_pass0_tfrozen_src53.csv
[Sat Jun 22 04:07:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092850201_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092850201_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 04:56:01 2013] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 57 at 17.917038 pixels away
[Sat Jun 22 04:56:01 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 04:56:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 04:56:01 2013] Assessing source extent using major
[Sat Jun 22 04:56:01 2013] Source does appear to be extended
[Sat Jun 22 04:56:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 04:56:24 2013] Using EEF radius (= 13.78 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 04:56:24 2013] Initial guess for spatial extent in simple fitting = 13.78"
[Sat Jun 22 04:56:24 2013] source mask rpix=3.2, npix_max = 53, mask sum = 34, frac = 0.632
[Sat Jun 22 04:56:24 2013] Giving source the simple spatial ID 51 for pass 1, mean size = 13.78"
[Sat Jun 22 07:21:10 2013] fullrun_pn_xmm0092850201_pi300-10000_cl_pass1_src51.ximg exists
[Sat Jun 22 07:21:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092850201_pi300-10000_cl_pass1_src51.csv
[Sat Jun 22 07:21:10 2013] fullrun_pn_xmm0092850201_pi300-10000_cl_pass1_src51_1.ximg exists
[Sat Jun 22 07:21:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092850201_pi300-10000_cl_pass1_src51.csv
[Sat Jun 22 07:21:10 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092850201_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092850201_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 07:21:11 2013] fullrun_pn_xmm0092850201_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Sat Jun 22 07:21:11 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0092850201_pi300-10000_cl_pass1_tfrozen_src51.csv
[Sat Jun 22 07:21:11 2013] fullrun_pn_xmm0092850201_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Sat Jun 22 07:21:11 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0092850201_pi300-10000_cl_pass1_tfrozen_src51.csv
[Sat Jun 22 07:21:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092850201_pi300-10000_cl_pass1_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092850201_pi300-10000_cl_pass1_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 08:06:00 2013] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 57 at 16.720043 pixels away
[Sat Jun 22 08:06:00 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 08:06:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 08:06:00 2013] Assessing source extent using major
[Sat Jun 22 08:06:00 2013] Source does appear to be extended
[Sat Jun 22 08:06:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 08:06:27 2013] XMMSAS src. selection expression = ellipse(40869.146820, 16534.919189, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 08:06:27 2013] Writing source region out to fullrun_pn_xmm0092850201_pi300-10000_pass1_cl_src57_src.reg
[Sat Jun 22 08:06:27 2013] Extracting stamp from image fullrun_pn_xmm0092850201_pi300-10000_cl_sm2.00.img.gz, (433, 153) - (508, 228)
[Sat Jun 22 08:06:27 2013] XMMSAS bgd. selection expression = annulus(40869.146820, 16534.919189, 1087.500000, 2175.000000, X, Y) && !ellipse(41309.183411, 18926.689056, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 08:06:27 2013] Writing fullrun_pn_xmm0092850201_pi300-10000_pass1_cl_src57.gif
[Sat Jun 22 09:30:02 2013] Mean detx,y = (-17941.39, -3007.16) 
[Sat Jun 22 09:30:07 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 09:30:27 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 09:30:28 2013] Setting source spectrum file to fullrun_pn_xmm0092850201_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Sat Jun 22 09:30:28 2013] Setting bgd. spectrum file to fullrun_pn_xmm0092850201_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Sat Jun 22 11:01:02 2013] Not generating rmf since there are only 95 counts
[Sat Jun 22 11:01:02 2013] rmf not generated due to insufficient counts
[Sat Jun 22 11:48:18 2013] Updating aperture counts using extracted products
[Sat Jun 22 11:48:18 2013] Total counts from fullrun_pn_xmm0092850201_pi300-10000_pass1_cl_src57_src_b10.pi.gz = 307.00
[Sat Jun 22 11:48:18 2013] Total counts from fullrun_pn_xmm0092850201_pi300-10000_pass1_cl_src57_bgd.pi.gz = 1525.00
[Sat Jun 22 11:48:18 2013] Got source and background scale factors 821380.000000, 5272319.000000
[Sat Jun 22 11:48:18 2013] User source parameters:
  Position = (470.3, 190.6) = 21 36 48.08 -14 39 47.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 69.4 +/- 18.5
  Background aperture counts = 237.6
  Rate = 0.002 +/- 0.0004

[Sat Jun 22 11:48:18 2013] Updating counts from extracted products
[Sat Jun 22 11:48:18 2013] Set source signif. to 69.42/15.41 = 4.50
[Sat Jun 22 11:48:23 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 11:48:23 2013] Using photon index=1.80, rate=0.00158, arf fullrun_pn_xmm0092850201_pi300-10000_pass1_cl_src57.arf
[Sat Jun 22 11:48:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 11:48:23 2013] Updating source flux to 2.1e-14
[Sat Jun 22 11:48:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 11:48:59 2013] xmm0092850201/analysis//spectral/fullrun_pn_xmm0092850201_pi300-10000_pass1_cl_src57_pl.csv not found, spectral fit skipped or did not complete