[Sat Jun 22 01:33:42 2013] Detection parameters:
  Position = (270.6, 282.5) = 21 37 47.94 -14 33 9.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.5 +/- 13.4
  Background counts = 54.0
  Rate = 0.007 +/- 0.002

[Sat Jun 22 01:33:43 2013] Off-axis axis estimate = 2.33'
[Sat Jun 22 04:47:50 2013] Using EEF radius (= 7.59 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 04:47:50 2013] Initial guess for spatial extent in simple fitting = 7.59"
[Sat Jun 22 04:47:50 2013] source mask rpix=1.7, npix_max = 20, mask sum = 13, frac = 0.645
[Sat Jun 22 04:47:50 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 7.59"
[Sat Jun 22 04:55:45 2013] fullrun_mos2_xmm0092850201_pi300-10000_cl_pass0_src4.ximg exists
[Sat Jun 22 04:55:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092850201_pi300-10000_cl_pass0_src4.csv
[Sat Jun 22 04:55:45 2013] fullrun_mos2_xmm0092850201_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat Jun 22 04:55:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092850201_pi300-10000_cl_pass0_src4.csv
[Sat Jun 22 04:55:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0092850201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0092850201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 04:55:45 2013] fullrun_mos2_xmm0092850201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat Jun 22 04:55:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092850201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Jun 22 04:55:45 2013] fullrun_mos2_xmm0092850201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Jun 22 04:55:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092850201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Jun 22 04:55:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0092850201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0092850201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 04:56:09 2013] Source 4 is offset by -1.494352 and -0.472298 pixels which is larger than
2 X fitted extent = 0.872575 x 0.872575, not incorporating fit results
[Sat Jun 22 04:56:09 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 04:56:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 04:56:09 2013] Assessing source extent using major
[Sat Jun 22 04:56:09 2013] Source does appear to be extended
[Sat Jun 22 04:56:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 04:56:09 2013] Deleting source due to low Poisson probability 0.9