[Thu Jan  5 07:46:17 2012] Detection parameters:
  Position = (303.2, 264.9) = 14 9 19.59 26 17 37.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.2 +/- 17.4
  Background counts = 140.4
  Rate = 0.001 +/- 0.0003

[Thu Jan  5 07:46:18 2012] Off-axis axis estimate = 2.45'
[Thu Jan  5 07:55:05 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 07:55:05 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Thu Jan  5 07:55:05 2012] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.734
[Thu Jan  5 07:55:05 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 7.66"
[Thu Jan  5 11:29:34 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_src57.ximg exists
[Thu Jan  5 11:29:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_src57.csv
[Thu Jan  5 11:29:34 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_src57_1.ximg exists
[Thu Jan  5 11:29:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_src57.csv
[Thu Jan  5 11:29:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 11:29:35 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Thu Jan  5 11:29:35 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Thu Jan  5 11:29:35 2012] Fit fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src57 appears to have run properly
[Thu Jan  5 15:22:15 2012] Warning: source 57 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 60 at 10.452421 pixels away
[Thu Jan  5 15:22:15 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 15:22:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 15:22:15 2012] Assessing source extent using major
[Thu Jan  5 15:22:15 2012] Source does appear to be extended
[Thu Jan  5 15:22:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 15:23:00 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 15:23:00 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Thu Jan  5 15:23:00 2012] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.734
[Thu Jan  5 15:23:00 2012] Giving source the simple spatial ID 56 for pass 1, mean size = 7.66"
[Thu Jan  5 19:18:02 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_src56.ximg exists
[Thu Jan  5 19:18:02 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_src56_1.ximg exists
[Thu Jan  5 19:18:02 2012] Fit fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_src56 appears to have run properly
[Thu Jan  5 19:18:04 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Thu Jan  5 19:18:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src56.csv
[Thu Jan  5 19:18:04 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Thu Jan  5 19:18:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src56.csv
[Thu Jan  5 19:18:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 21:56:38 2012] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 60 at 29.104137 pixels away
[Thu Jan  5 21:56:38 2012] Spatial fit model total counts = 2183.980000, observed total counts = 2168.000000
[Thu Jan  5 21:56:38 2012] Offset between fit and detection position for source 60 = 6.729690 pixels
[Thu Jan  5 21:56:38 2012] 1900.406000 total counts/ 1173.750000 bgd. counts: snr = 21.210019
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 6.729690 pixels
  Position = (307.2, 259.5) = 14 9 18.30 26 17 3.0
  Extent = 15.3 (15.3-30.6)" x 15.3 (15.3-30.6)", rotation angle = 285 (135-0) degrees
  Source counts = 726.7 +/- 43.6
  Background counts = 1173.8
  Rate = 0.01 +/- 0.0008
[Thu Jan  5 21:56:38 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 21:56:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 21:56:38 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 21:56:38 2012] Source does appear to be extended
[Thu Jan  5 21:56:38 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.50
[Thu Jan  5 21:57:19 2012] XMMSAS src. selection expression = ellipse(26676.726000, 22529.482000, 918.606026, 918.606026, 285.029000, X, Y)
[Thu Jan  5 21:57:19 2012] Writing source region out to fullrun_pn_xmm0092850101_pi300-10000_pass1_cl_src60_src.reg
[Thu Jan  5 21:57:19 2012] Extracting stamp from image fullrun_pn_xmm0092850101_pi300-10000_cl_sm2.00.img.gz, (254, 207) - (360, 312)
[Thu Jan  5 21:57:19 2012] XMMSAS bgd. selection expression = annulus(26676.726000, 22529.482000, 1531.010044, 3062.020088, X, Y) && !ellipse(25147.176000, 24089.163800, 1406.997640, 1406.997640, 0.000000, X, Y) && !ellipse(27525.094800, 23177.468400, 1260.208036, 1260.208036, 0.000000, X, Y) && !ellipse(24739.610199, 22371.069183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23714.351240, 20959.956000, 1447.952042, 1447.952042, 0.000000, X, Y) && !ellipse(27418.730600, 19386.969400, 345.064810, 345.064810, 0.000000, X, Y)
[Thu Jan  5 21:57:19 2012] Writing fullrun_pn_xmm0092850101_pi300-10000_pass1_cl_src60.gif
[Thu Jan  5 23:41:25 2012] Mean detx,y = (-685.79, -1952.09) 
[Thu Jan  5 23:41:36 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 23:42:40 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 23:42:41 2012] Setting source spectrum file to fullrun_pn_xmm0092850101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Thu Jan  5 23:42:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0092850101_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Fri Jan  6 05:19:49 2012] Updating aperture counts using extracted products
[Fri Jan  6 05:19:49 2012] Error reading totcts from fullrun_pn_xmm0092850101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Fri Jan  6 05:19:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 05:19:53 2012] Using photon index=1.80, rate=0.0132, arf fullrun_pn_xmm0092850101_pi300-10000_pass1_cl_src60.arf
[Fri Jan  6 05:19:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 05:19:53 2012] Updating source flux to 3.6e-14