[Thu Jan  5 07:46:15 2012] Detection parameters:
  Position = (325.3, 186.8) = 14 9 12.45 26 11 45.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1368.6 +/- 46.6
  Background counts = 113.6
  Rate = 0.04 +/- 0.001

[Thu Jan  5 07:46:18 2012] Off-axis axis estimate = 8.33'
[Thu Jan  5 07:55:05 2012] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 07:55:05 2012] Initial guess for spatial extent in simple fitting = 10.59"
[Thu Jan  5 07:55:05 2012] source mask rpix=2.4, npix_max = 34, mask sum = 33, frac = 0.958
[Thu Jan  5 07:55:05 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.59"
[Thu Jan  5 11:29:33 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_src5.ximg exists
[Thu Jan  5 11:29:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_src5.csv
[Thu Jan  5 11:29:33 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Jan  5 11:29:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_src5.csv
[Thu Jan  5 11:29:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 11:29:34 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Jan  5 11:29:34 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jan  5 11:29:34 2012] Fit fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Jan  5 15:22:14 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.142378 pixels away
[Thu Jan  5 15:22:15 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 15:22:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 15:22:15 2012] Assessing source extent using major
[Thu Jan  5 15:22:15 2012] Source does appear to be extended
[Thu Jan  5 15:22:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 15:23:00 2012] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 15:23:00 2012] Initial guess for spatial extent in simple fitting = 10.59"
[Thu Jan  5 15:23:00 2012] source mask rpix=2.4, npix_max = 34, mask sum = 33, frac = 0.958
[Thu Jan  5 15:23:00 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.59"
[Thu Jan  5 19:18:02 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_src5.ximg exists
[Thu Jan  5 19:18:02 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Jan  5 19:18:02 2012] Fit fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_src5 appears to have run properly
[Thu Jan  5 19:18:03 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Jan  5 19:18:03 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jan  5 19:18:03 2012] Fit fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Jan  5 21:56:38 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.488576 pixels away
[Thu Jan  5 21:56:38 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 21:56:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 21:56:38 2012] Assessing source extent using major
[Thu Jan  5 21:56:38 2012] Source does appear to be extended
[Thu Jan  5 21:56:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 21:57:18 2012] Counts = 1368.601318, rescaling region sizes by 2.000000
[Thu Jan  5 21:57:18 2012] XMMSAS src. selection expression = ellipse(28250.708557, 16200.226196, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Jan  5 21:57:18 2012] Writing source region out to fullrun_pn_xmm0092850101_pi300-10000_pass1_cl_src5_src.reg
[Thu Jan  5 21:57:18 2012] Extracting stamp from image fullrun_pn_xmm0092850101_pi300-10000_cl_sm2.00.img.gz, (250, 112) - (400, 262)
[Thu Jan  5 21:57:18 2012] XMMSAS bgd. selection expression = annulus(28250.708557, 16200.226196, 4350.000000, 8700.000000, X, Y) && !ellipse(21621.184160, 22062.514000, 602.217617, 294.513608, 341.346900, X, Y) && !ellipse(25907.811200, 18424.495200, 528.400815, 528.400815, 0.000000, X, Y) && !ellipse(32020.305200, 17259.103200, 453.608013, 453.608013, 0.000000, X, Y) && !ellipse(25147.176000, 24089.163800, 1406.997640, 1406.997640, 0.000000, X, Y) && !ellipse(20578.785019, 11037.744751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37388.443237, 22596.645782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18936.305573, 11106.637451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19656.861999, 10271.768548, 607.040776, 355.758054, 43.533678, X, Y) && !ellipse(36005.934967, 24845.381256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37658.465027, 24147.193512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27525.094800, 23177.468400, 1260.208036, 1260.208036, 0.000000, X, Y) && !ellipse(26676.726000, 22529.482000, 1224.808035, 1224.808035, 285.029000, X, Y) && !ellipse(24739.610199, 22371.069183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21906.492000, 20898.258000, 1432.480041, 1432.480041, 0.000000, X, Y) && !ellipse(23714.351240, 20959.956000, 1447.952042, 1447.952042, 0.000000, X, Y) && !ellipse(27418.730600, 19386.969400, 345.064810, 345.064810, 0.000000, X, Y) && !ellipse(21742.584002, 17803.462128, 445.874103, 272.067047, 349.134203, X, Y) && !ellipse(24846.000560, 17782.140800, 409.098412, 409.098412, 0.000000, X, Y) && !ellipse(22655.520980, 17351.020400, 428.272812, 428.272812, 0.000000, X, Y) && !ellipse(29357.977882, 15560.668600, 672.406419, 250.866407, 339.484000, X, Y) && !ellipse(25937.898962, 15160.559445, 476.890403, 314.300624, 15.641430, X, Y) && !ellipse(32205.890200, 14471.130400, 751.393622, 371.232011, 118.135920, X, Y) && !ellipse(23693.314200, 14411.096000, 350.339210, 350.339210, 0.000000, X, Y) && !ellipse(22555.320251, 8959.157494, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan  5 21:57:18 2012] Writing fullrun_pn_xmm0092850101_pi300-10000_pass1_cl_src5.gif
[Thu Jan  5 22:05:31 2012] Mean detx,y = (-387.45, -8520.72) 
[Thu Jan  5 22:05:45 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 22:08:56 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 22:08:57 2012] Setting source spectrum file to fullrun_pn_xmm0092850101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jan  5 22:08:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0092850101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jan  6 00:15:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan  6 00:15:15 2012] rmf not generated due to insufficient counts
[Fri Jan  6 05:19:47 2012] Updating aperture counts using extracted products
[Fri Jan  6 05:19:47 2012] Error reading totcts from fullrun_pn_xmm0092850101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jan  6 05:19:50 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 05:19:50 2012] Using photon index=1.80, rate=0.0417, arf fullrun_pn_xmm0092850101_pi300-10000_pass1_cl_src5.arf
[Fri Jan  6 05:19:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 05:19:50 2012] Updating source flux to 1.5e-13
[Fri Jan  6 05:28:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting