[Thu Jan  5 07:46:16 2012] Detection parameters:
  Position = (262.0, 365.0) = 14 9 32.94 26 24 41.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 261.9 +/- 26.1
  Background counts = 118.8
  Rate = 0.007 +/- 0.0007

[Thu Jan  5 07:46:18 2012] Off-axis axis estimate = 5.50'
[Thu Jan  5 07:55:05 2012] Using EEF radius (= 9.18 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 07:55:05 2012] Initial guess for spatial extent in simple fitting = 9.18"
[Thu Jan  5 07:55:05 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.321
[Thu Jan  5 07:55:05 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 9.18"
[Thu Jan  5 11:29:33 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_src31.ximg exists
[Thu Jan  5 11:29:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_src31.csv
[Thu Jan  5 11:29:33 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_src31_1.ximg exists
[Thu Jan  5 11:29:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_src31.csv
[Thu Jan  5 11:29:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 11:29:35 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Thu Jan  5 11:29:35 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Thu Jan  5 11:29:35 2012] Fit fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Thu Jan  5 15:22:14 2012] Spatial fit model total counts = 1579.460000, observed total counts = 1577.000000
[Thu Jan  5 15:22:14 2012] Offset between fit and detection position for source 33 = 2.503259 pixels
[Thu Jan  5 15:22:14 2012] 1598.424000 total counts/ 1008.160000 bgd. counts: snr = 18.590093
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 2.503259 pixels
  Position = (262.6, 362.5) = 14 9 32.75 26 24 31.1
  Extent = 15.2 (11.6-18.4)", rotation angle = 0
  Source counts = 590.3 +/- 40.0
  Background counts = 1008.2
  Rate = 0.01 +/- 0.0007
[Thu Jan  5 15:22:15 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 15:22:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 15:22:15 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 15:22:15 2012] Source does appear to be extended
[Thu Jan  5 15:22:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 15:22:15 2012] Source is confused with source 30
[Thu Jan  5 15:22:15 2012] Source is confused with source 36
[Thu Jan  5 15:23:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan  5 15:23:00 2012] Initial guess for spatial extent in simple fitting = 15.16"
[Thu Jan  5 15:23:00 2012] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.007
[Thu Jan  5 15:23:00 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 15.16"
[Thu Jan  5 19:18:02 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_src31.ximg exists
[Thu Jan  5 19:18:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_src31.csv
[Thu Jan  5 19:18:02 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_src31_1.ximg exists
[Thu Jan  5 19:18:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_src31.csv
[Thu Jan  5 19:18:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 19:18:03 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Thu Jan  5 19:18:03 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Thu Jan  5 19:18:03 2012] Fit fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Thu Jan  5 21:56:38 2012] Warning, spatial fit 31 centroid is now closest to src. 30
[Thu Jan  5 21:56:38 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 21:56:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 21:56:38 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 21:56:38 2012] Source does appear to be extended
[Thu Jan  5 21:56:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 21:57:18 2012] XMMSAS src. selection expression = ellipse(22793.607000, 31492.700000, 909.876026, 909.876026, 0.000000, X, Y)
[Thu Jan  5 21:57:18 2012] Writing source region out to fullrun_pn_xmm0092850101_pi300-10000_pass1_cl_src33_src.reg
[Thu Jan  5 21:57:18 2012] Extracting stamp from image fullrun_pn_xmm0092850101_pi300-10000_cl_sm2.00.img.gz, (210, 310) - (315, 415)
[Thu Jan  5 21:57:18 2012] XMMSAS bgd. selection expression = annulus(22793.607000, 31492.700000, 1516.460044, 3032.920087, X, Y) && !ellipse(21478.382000, 35207.096000, 1680.856048, 1680.856048, 0.000000, X, Y) && !ellipse(21724.711800, 34688.698000, 1069.568031, 1069.568031, 0.000000, X, Y) && !ellipse(26084.690800, 33031.450600, 651.752819, 651.752819, 0.000000, X, Y) && !ellipse(22323.347800, 32793.448000, 1083.104031, 1083.104031, 0.000000, X, Y) && !ellipse(22523.789124, 32317.430206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26205.938400, 32402.502200, 711.736820, 711.736820, 0.000000, X, Y) && !ellipse(21589.261200, 30918.975200, 329.363209, 329.363209, 0.000000, X, Y) && !ellipse(22928.148000, 30717.438000, 1349.064039, 1349.064039, 0.000000, X, Y) && !ellipse(23191.170563, 30234.060577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23312.146000, 29832.660400, 1326.752038, 336.452010, 73.028000, X, Y) && !ellipse(23586.951400, 28943.630000, 1218.968035, 471.279214, 69.129000, X, Y) && !ellipse(23916.843113, 27865.777028, 1218.968035, 388.966542, 69.664808, X, Y)
[Thu Jan  5 21:57:18 2012] Writing fullrun_pn_xmm0092850101_pi300-10000_pass1_cl_src33.gif
[Thu Jan  5 22:59:12 2012] Mean detx,y = (233.07, 7745.04) 
[Thu Jan  5 22:59:21 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 23:00:28 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 23:00:28 2012] Setting source spectrum file to fullrun_pn_xmm0092850101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Thu Jan  5 23:00:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0092850101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Fri Jan  6 05:19:48 2012] Updating aperture counts using extracted products
[Fri Jan  6 05:19:48 2012] Error reading totcts from fullrun_pn_xmm0092850101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Fri Jan  6 05:19:52 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 05:19:52 2012] Using photon index=1.80, rate=0.0107, arf fullrun_pn_xmm0092850101_pi300-10000_pass1_cl_src33.arf
[Fri Jan  6 05:19:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 05:19:52 2012] Updating source flux to 3.6e-14
[Fri Jan  6 05:28:36 2012] Flag c found in src. 33 procflags, skipping spectral fitting