[Thu Jan  5 07:46:15 2012] Detection parameters:
  Position = (298.4, 212.1) = 14 9 21.14 26 13 37.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2503.1 +/- 62.4
  Background counts = 125.9
  Rate = 0.06 +/- 0.002

[Thu Jan  5 07:46:18 2012] Off-axis axis estimate = 6.26'
[Thu Jan  5 07:55:05 2012] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 07:55:05 2012] Initial guess for spatial extent in simple fitting = 9.56"
[Thu Jan  5 07:55:05 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.031
[Thu Jan  5 07:55:05 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.56"
[Thu Jan  5 11:29:33 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jan  5 11:29:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_src3.csv
[Thu Jan  5 11:29:33 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jan  5 11:29:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_src3.csv
[Thu Jan  5 11:29:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 11:29:34 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jan  5 11:29:34 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jan  5 11:29:34 2012] Fit fullrun_pn_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Jan  5 15:22:14 2012] Spatial fit model total counts = 3506.780000, observed total counts = 3504.000000
[Thu Jan  5 15:22:14 2012] Offset between fit and detection position for source 3 = 0.189525 pixels
[Thu Jan  5 15:22:14 2012] 3430.880000 total counts/ 1558.840000 bgd. counts: snr = 47.414847
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.189525 pixels
  Position = (298.3, 212.3) = 14 9 21.16 26 13 37.7
  Extent = 6.6 (6.3-7.0)", rotation angle = 0
  Source counts = 1872.0 +/- 58.6
  Background counts = 1558.8
  Rate = 0.03 +/- 0.001
[Thu Jan  5 15:22:15 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 15:22:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 15:22:15 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 15:22:15 2012] Source does appear to be extended
[Thu Jan  5 15:22:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 15:23:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan  5 15:23:00 2012] Initial guess for spatial extent in simple fitting = 6.62"
[Thu Jan  5 15:23:00 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.978
[Thu Jan  5 15:23:00 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.62"
[Thu Jan  5 19:18:02 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jan  5 19:18:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_src3.csv
[Thu Jan  5 19:18:02 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jan  5 19:18:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_src3.csv
[Thu Jan  5 19:18:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 19:18:03 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jan  5 19:18:03 2012] fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jan  5 19:18:03 2012] Fit fullrun_pn_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Jan  5 21:56:38 2012] Spatial fit model total counts = 3503.990000, observed total counts = 3504.000000
[Thu Jan  5 21:56:38 2012] Offset between fit and detection position for source 3 = 0.005110 pixels
[Thu Jan  5 21:56:38 2012] 3428.050000 total counts/ 1559.870000 bgd. counts: snr = 47.301457
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.005110 pixels
  Position = (298.3, 212.3) = 14 9 21.16 26 13 37.8
  Extent = 6.6 (6.3-7.0)", rotation angle = 0
  Source counts = 1868.2 +/- 58.5
  Background counts = 1559.9
  Rate = 0.03 +/- 0.001
[Thu Jan  5 21:56:38 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 21:56:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 21:56:38 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 21:56:38 2012] Source does appear to be extended
[Thu Jan  5 21:56:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 21:57:17 2012] Counts = 1868.180000, rescaling region sizes by 2.000000
[Thu Jan  5 21:57:17 2012] XMMSAS src. selection expression = ellipse(25907.811200, 18424.495200, 792.601223, 792.601223, 0.000000, X, Y)
[Thu Jan  5 21:57:17 2012] Writing source region out to fullrun_pn_xmm0092850101_pi300-10000_pass1_cl_src3_src.reg
[Thu Jan  5 21:57:17 2012] Extracting stamp from image fullrun_pn_xmm0092850101_pi300-10000_cl_sm2.00.img.gz, (253, 167) - (344, 258)
[Thu Jan  5 21:57:18 2012] XMMSAS bgd. selection expression = annulus(25907.811200, 18424.495200, 2642.004076, 5284.008152, X, Y) && !ellipse(21621.184160, 22062.514000, 602.217617, 294.513608, 341.346900, X, Y) && !ellipse(28250.708557, 16200.226196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25147.176000, 24089.163800, 1406.997640, 1406.997640, 0.000000, X, Y) && !ellipse(27525.094800, 23177.468400, 1260.208036, 1260.208036, 0.000000, X, Y) && !ellipse(26676.726000, 22529.482000, 1224.808035, 1224.808035, 285.029000, X, Y) && !ellipse(24739.610199, 22371.069183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21906.492000, 20898.258000, 1432.480041, 1432.480041, 0.000000, X, Y) && !ellipse(23714.351240, 20959.956000, 1447.952042, 1447.952042, 0.000000, X, Y) && !ellipse(27418.730600, 19386.969400, 345.064810, 345.064810, 0.000000, X, Y) && !ellipse(21742.584002, 17803.462128, 445.874103, 272.067047, 349.134203, X, Y) && !ellipse(24846.000560, 17782.140800, 409.098412, 409.098412, 0.000000, X, Y) && !ellipse(22655.520980, 17351.020400, 428.272812, 428.272812, 0.000000, X, Y) && !ellipse(29357.977882, 15560.668600, 672.406419, 250.866407, 339.484000, X, Y) && !ellipse(25937.898962, 15160.559445, 476.890403, 314.300624, 15.641430, X, Y) && !ellipse(23693.314200, 14411.096000, 350.339210, 350.339210, 0.000000, X, Y)
[Thu Jan  5 21:57:18 2012] Writing fullrun_pn_xmm0092850101_pi300-10000_pass1_cl_src3.gif
[Thu Jan  5 22:00:57 2012] Mean detx,y = (1287.97, -5681.44) 
[Thu Jan  5 22:01:03 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 22:02:09 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 22:02:10 2012] Setting source spectrum file to fullrun_pn_xmm0092850101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jan  5 22:02:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0092850101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jan  6 05:19:47 2012] Updating aperture counts using extracted products
[Fri Jan  6 05:19:47 2012] Error reading totcts from fullrun_pn_xmm0092850101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jan  6 05:19:50 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 05:19:50 2012] Using photon index=1.80, rate=0.0339, arf fullrun_pn_xmm0092850101_pi300-10000_pass1_cl_src3.arf
[Fri Jan  6 05:19:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 05:19:50 2012] Updating source flux to 1.1e-13