[Thu Jan  5 07:47:45 2012] Detection parameters:
  Position = (344.5, 302.3) = 14 9 6.24 26 20 9.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 325.7 +/- 24.1
  Background counts = 48.6
  Rate = 0.006 +/- 0.0005

[Thu Jan  5 07:47:47 2012] Off-axis axis estimate = 3.35'
[Thu Jan  5 13:02:30 2012] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 13:02:30 2012] Initial guess for spatial extent in simple fitting = 8.10"
[Thu Jan  5 13:02:30 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.120
[Thu Jan  5 13:02:30 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 8.10"
[Thu Jan  5 15:21:50 2012] fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_src7.ximg exists
[Thu Jan  5 15:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_src7.csv
[Thu Jan  5 15:21:50 2012] fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Jan  5 15:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_src7.csv
[Thu Jan  5 15:21:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 15:21:51 2012] fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Jan  5 15:21:51 2012] fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Jan  5 15:21:51 2012] Fit fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Thu Jan  5 15:22:36 2012] Warning, spatial fit 7 centroid is now closest to src. 16
[Thu Jan  5 15:22:36 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 15:22:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 15:22:36 2012] Assessing source extent using major
[Thu Jan  5 15:22:36 2012] Source does appear to be extended
[Thu Jan  5 15:22:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 20:12:40 2012] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 20:12:40 2012] Initial guess for spatial extent in simple fitting = 8.10"
[Thu Jan  5 20:12:40 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.120
[Thu Jan  5 20:12:40 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 8.10"
[Thu Jan  5 21:56:17 2012] fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_src7.ximg exists
[Thu Jan  5 21:56:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_src7.csv
[Thu Jan  5 21:56:17 2012] fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu Jan  5 21:56:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_src7.csv
[Thu Jan  5 21:56:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 21:56:17 2012] fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu Jan  5 21:56:17 2012] fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu Jan  5 21:56:17 2012] Fit fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Thu Jan  5 21:56:55 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 10.385608 pixels away
[Thu Jan  5 21:56:55 2012] Source 8 is offset by 3.462615 and -6.700152 pixels which is larger than
2 X fitted extent = 1.843333 x 1.843333, not incorporating fit results
[Thu Jan  5 21:56:55 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 21:56:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 21:56:55 2012] Assessing source extent using major
[Thu Jan  5 21:56:55 2012] Source does appear to be extended
[Thu Jan  5 21:56:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 03:52:46 2012] XMMSAS src. selection expression = ellipse(29918.709473, 26250.714813, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan  6 03:52:46 2012] Writing source region out to fullrun_mos2_xmm0092850101_pi300-10000_pass1_cl_src8_src.reg
[Fri Jan  6 03:52:46 2012] Extracting stamp from image fullrun_mos2_xmm0092850101_pi300-10000_cl_sm2.00.img.gz, (307, 265) - (382, 340)
[Fri Jan  6 03:52:46 2012] XMMSAS bgd. selection expression = annulus(29918.709473, 26250.714813, 1087.500000, 2175.000000, X, Y) && !ellipse(31892.283680, 28138.824600, 397.535211, 397.535211, 0.000000, X, Y) && !ellipse(29196.920000, 27343.852000, 1282.960037, 1282.960037, 0.000000, X, Y)
[Fri Jan  6 03:52:46 2012] Writing fullrun_mos2_xmm0092850101_pi300-10000_pass1_cl_src8.gif
[Fri Jan  6 04:01:14 2012] Mean detx,y = (5108.06, -795.82) 
[Fri Jan  6 04:01:17 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 04:01:42 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 04:01:43 2012] Setting source spectrum file to fullrun_mos2_xmm0092850101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Jan  6 04:01:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0092850101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri Jan  6 04:34:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan  6 04:34:01 2012] rmf not generated due to insufficient counts
[Fri Jan  6 05:19:58 2012] Updating aperture counts using extracted products
[Fri Jan  6 05:19:58 2012] Error reading totcts from fullrun_mos2_xmm0092850101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Jan  6 05:19:59 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 05:19:59 2012] Using photon index=1.80, rate=0.00614, arf fullrun_mos2_xmm0092850101_pi300-10000_pass1_cl_src8.arf
[Fri Jan  6 05:19:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 05:19:59 2012] Updating source flux to 7.7e-14
[Fri Jan  6 05:23:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting