[Thu Jan  5 07:47:45 2012] Detection parameters:
  Position = (289.5, 277.3) = 14 9 24.03 26 18 21.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40333.9 +/- 236.5
  Background counts = 55.9
  Rate = 0.6 +/- 0.004

[Thu Jan  5 07:47:47 2012] Off-axis axis estimate = 1.66'
[Thu Jan  5 13:02:30 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 13:02:30 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Thu Jan  5 13:02:30 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.063
[Thu Jan  5 13:02:30 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Thu Jan  5 15:21:50 2012] fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jan  5 15:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_src1.csv
[Thu Jan  5 15:21:50 2012] fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jan  5 15:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_src1.csv
[Thu Jan  5 15:21:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 15:21:50 2012] fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jan  5 15:21:50 2012] fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jan  5 15:21:50 2012] Fit fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jan  5 15:22:36 2012] Spatial fit model total counts = 35058.000000, observed total counts = 35067.000000
[Thu Jan  5 15:22:36 2012] Offset between fit and detection position for source 7 = 0.225293 pixels
[Thu Jan  5 15:22:36 2012] 35287.070000 total counts/ 7272.370000 bgd. counts: snr = 328.509545
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.225293 pixels
  Position = (289.5, 277.5) = 14 9 24.03 26 18 21.4
  Extent = 5.7 (5.6-5.7)", rotation angle = 0
  Source counts = 28014.7 +/- 187.8
  Background counts = 7272.4
  Rate = 0.5 +/- 0.003
[Thu Jan  5 15:22:36 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 15:22:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 15:22:36 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 15:22:36 2012] Source does appear to be extended
[Thu Jan  5 15:22:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 20:12:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan  5 20:12:40 2012] Initial guess for spatial extent in simple fitting = 5.66"
[Thu Jan  5 20:12:40 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.694
[Thu Jan  5 20:12:40 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.66"
[Thu Jan  5 21:56:17 2012] fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jan  5 21:56:17 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_src1.csv
[Thu Jan  5 21:56:17 2012] fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jan  5 21:56:17 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_src1.csv
[Thu Jan  5 21:56:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 21:56:17 2012] fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jan  5 21:56:17 2012] fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jan  5 21:56:17 2012] Fit fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jan  5 21:56:55 2012] Spatial fit model total counts = 35036.600000, observed total counts = 35067.000000
[Thu Jan  5 21:56:55 2012] Offset between fit and detection position for source 7 = 0.002723 pixels
[Thu Jan  5 21:56:55 2012] 35260.580000 total counts/ 7258.880000 bgd. counts: snr = 328.662073
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.002723 pixels
  Position = (289.5, 277.5) = 14 9 24.03 26 18 21.4
  Extent = 5.7 (5.6-5.7)", rotation angle = 0
  Source counts = 28001.7 +/- 187.8
  Background counts = 7258.9
  Rate = 0.5 +/- 0.003
[Thu Jan  5 21:56:55 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 21:56:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 21:56:55 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 21:56:55 2012] Source does appear to be extended
[Thu Jan  5 21:56:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 03:52:45 2012] Counts = 28001.700000, rescaling region sizes by 3.000000
[Fri Jan  6 03:52:45 2012] XMMSAS src. selection expression = ellipse(25136.822200, 24096.543000, 1019.442629, 1019.442629, 0.000000, X, Y)
[Fri Jan  6 03:52:45 2012] Writing source region out to fullrun_mos2_xmm0092850101_pi300-10000_pass1_cl_src7_src.reg
[Fri Jan  6 03:52:45 2012] Extracting stamp from image fullrun_mos2_xmm0092850101_pi300-10000_cl_sm2.00.img.gz, (231, 219) - (348, 336)
[Fri Jan  6 03:52:46 2012] XMMSAS bgd. selection expression = annulus(25136.822200, 24096.543000, 5097.213147, 10194.426293, X, Y) && !ellipse(21641.446000, 21923.699200, 407.156012, 407.156012, 0.000000, X, Y) && !ellipse(25881.806000, 18389.538200, 810.032023, 510.938415, 109.148441, X, Y) && !ellipse(32022.453400, 17256.229400, 471.070414, 471.070414, 0.000000, X, Y) && !ellipse(28237.720154, 16211.958771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29918.709473, 26250.714813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29426.429380, 19007.558200, 392.055211, 392.055211, 0.000000, X, Y) && !ellipse(31892.283680, 28138.824600, 397.535211, 397.535211, 0.000000, X, Y) && !ellipse(24241.316956, 24032.740509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18351.263229, 18623.140884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26187.536400, 28890.560200, 448.974413, 448.974413, 0.000000, X, Y) && !ellipse(14502.113907, 32981.642797, 566.430524, 276.557621, 323.282671, X, Y) && !ellipse(24014.482000, 27159.771400, 333.090410, 333.090410, 0.000000, X, Y) && !ellipse(29196.920000, 27343.852000, 1282.960037, 1282.960037, 0.000000, X, Y) && !ellipse(24441.054810, 23617.693054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16335.837128, 15467.645203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14428.197250, 20499.258926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29350.158844, 15585.402390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22627.481293, 17372.068512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15418.004120, 23387.021454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16719.170258, 25228.892273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17233.600769, 13317.740540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35967.349426, 24860.222870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22972.906000, 26190.130000, 1192.056034, 1192.056034, 0.000000, X, Y) && !ellipse(21125.738312, 21523.246643, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan  6 03:52:46 2012] Writing fullrun_mos2_xmm0092850101_pi300-10000_pass1_cl_src7.gif
[Fri Jan  6 03:53:06 2012] Mean detx,y = (-83.30, -125.78) 
[Fri Jan  6 03:53:11 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 03:58:27 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 03:58:27 2012] Setting source spectrum file to fullrun_mos2_xmm0092850101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jan  6 03:58:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0092850101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Jan  6 05:19:57 2012] Updating aperture counts using extracted products
[Fri Jan  6 05:19:58 2012] Error reading totcts from fullrun_mos2_xmm0092850101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jan  6 05:19:59 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 05:19:59 2012] Using photon index=1.80, rate=0.455, arf fullrun_mos2_xmm0092850101_pi300-10000_pass1_cl_src7.arf
[Fri Jan  6 05:19:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 05:19:59 2012] Updating source flux to 4.5e-12
[Fri Jan  6 05:28:36 2012] Reading fit data from xmm0092850101/analysis//spectral/fullrun_mos2_xmm0092850101_pi300-10000_pass1_cl_src7_pl.csv
[Fri Jan  6 05:28:36 2012] Spectral fit parameter nH value = 1.13623e+20
[Fri Jan  6 05:28:36 2012] Spectral fit parameter PhoIndex value = 2.40173
[Fri Jan  6 05:28:36 2012] Failed to get F(0.3-8.0) from xmm0092850101/analysis//spectral/fullrun_mos2_xmm0092850101_pi300-10000_pass1_cl_src7_pl.csv, possibly due to different flux energy range selected
[Fri Jan  6 05:28:36 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 05:28:36 2012] Using Nh = 1.1e+20, photon index=2.40, rate=0.455, arf fullrun_mos2_xmm0092850101_pi300-10000_pass1_cl_src7.arf
[Fri Jan  6 05:28:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 05:28:36 2012] Updating source flux to 3.6e-12