[Thu Jan  5 07:47:46 2012] Detection parameters:
  Position = (341.1, 308.8) = 14 9 7.33 26 20 37.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.2 +/- 17.2
  Background counts = 48.8
  Rate = 0.002 +/- 0.0003

[Thu Jan  5 07:47:47 2012] Off-axis axis estimate = 3.18'
[Thu Jan  5 13:02:30 2012] Using EEF radius (= 8.02 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 13:02:30 2012] Initial guess for spatial extent in simple fitting = 8.02"
[Thu Jan  5 13:02:30 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.911
[Thu Jan  5 13:02:30 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 8.02"
[Thu Jan  5 15:21:50 2012] fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_src17.ximg exists
[Thu Jan  5 15:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_src17.csv
[Thu Jan  5 15:21:50 2012] fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_src17_1.ximg exists
[Thu Jan  5 15:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_src17.csv
[Thu Jan  5 15:21:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 15:21:51 2012] fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Thu Jan  5 15:21:51 2012] fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Thu Jan  5 15:21:51 2012] Fit fullrun_mos2_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Thu Jan  5 15:22:36 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 10.523822 pixels away
[Thu Jan  5 15:22:36 2012] Spatial fit model total counts = 608.566000, observed total counts = 612.000000
[Thu Jan  5 15:22:36 2012] Offset between fit and detection position for source 16 = 7.815587 pixels
[Thu Jan  5 15:22:36 2012] 563.991000 total counts/ 321.743000 bgd. counts: snr = 13.505344
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 7.815587 pixels
  Position = (336.2, 314.9) = 14 9 8.92 26 21 3.7
  Extent = 16.0 (16.0-32.1)", rotation angle = 0
  Source counts = 242.2 +/- 23.7
  Background counts = 321.7
  Rate = 0.004 +/- 0.0004
[Thu Jan  5 15:22:36 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 15:22:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 15:22:36 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 15:22:36 2012] Source does appear to be extended
[Thu Jan  5 15:22:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 20:12:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan  5 20:12:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan  5 20:12:40 2012] Initial guess for spatial extent in simple fitting = 16.04"
[Thu Jan  5 20:12:40 2012] source mask rpix=3.7, npix_max = 70, mask sum = 64, frac = 0.913
[Thu Jan  5 20:12:40 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 16.04"
[Thu Jan  5 21:56:17 2012] fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_src17.ximg exists
[Thu Jan  5 21:56:17 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_src17.csv
[Thu Jan  5 21:56:17 2012] fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_src17_1.ximg exists
[Thu Jan  5 21:56:17 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_src17.csv
[Thu Jan  5 21:56:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 21:56:18 2012] fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Thu Jan  5 21:56:18 2012] fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Thu Jan  5 21:56:18 2012] Fit fullrun_mos2_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Thu Jan  5 21:56:55 2012] Warning, spatial fit 17 centroid is now closest to src. 8
[Thu Jan  5 21:56:55 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 21:56:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 21:56:55 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 21:56:55 2012] Source does appear to be extended
[Thu Jan  5 21:56:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 03:52:46 2012] XMMSAS src. selection expression = ellipse(29196.920000, 27343.852000, 962.220028, 962.220028, 0.000000, X, Y)
[Fri Jan  6 03:52:46 2012] Writing source region out to fullrun_mos2_xmm0092850101_pi300-10000_pass1_cl_src16_src.reg
[Fri Jan  6 03:52:46 2012] Extracting stamp from image fullrun_mos2_xmm0092850101_pi300-10000_cl_sm2.00.img.gz, (281, 260) - (391, 370)
[Fri Jan  6 03:52:46 2012] XMMSAS bgd. selection expression = annulus(29196.920000, 27343.852000, 1603.700046, 3207.400092, X, Y) && !ellipse(25136.822200, 24096.543000, 1359.256839, 1359.256839, 0.000000, X, Y) && !ellipse(29918.709473, 26250.714813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31892.283680, 28138.824600, 397.535211, 397.535211, 0.000000, X, Y) && !ellipse(26187.536400, 28890.560200, 448.974413, 448.974413, 0.000000, X, Y)
[Fri Jan  6 03:52:46 2012] Writing fullrun_mos2_xmm0092850101_pi300-10000_pass1_cl_src16.gif
[Fri Jan  6 04:05:54 2012] Mean detx,y = (4752.08, -1934.78) 
[Fri Jan  6 04:05:56 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 04:06:27 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 04:06:27 2012] Setting source spectrum file to fullrun_mos2_xmm0092850101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Jan  6 04:06:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0092850101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Fri Jan  6 05:19:58 2012] Updating aperture counts using extracted products
[Fri Jan  6 05:19:58 2012] Error reading totcts from fullrun_mos2_xmm0092850101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Jan  6 05:20:00 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 05:20:00 2012] Using photon index=1.80, rate=0.00394, arf fullrun_mos2_xmm0092850101_pi300-10000_pass1_cl_src16.arf
[Fri Jan  6 05:20:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 05:20:00 2012] Updating source flux to 4.5e-14