[Thu Jan  5 07:46:57 2012] Detection parameters:
  Position = (289.6, 277.2) = 14 9 24.00 26 18 21.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40928.8 +/- 241.9
  Background counts = 53.3
  Rate = 0.6 +/- 0.004

[Thu Jan  5 07:46:58 2012] Off-axis axis estimate = 1.67'
[Thu Jan  5 11:29:35 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 11:29:35 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Thu Jan  5 11:29:35 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.063
[Thu Jan  5 11:29:35 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Thu Jan  5 13:02:29 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jan  5 13:02:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src1.csv
[Thu Jan  5 13:02:29 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jan  5 13:02:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src1.csv
[Thu Jan  5 13:02:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 13:02:29 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jan  5 13:02:29 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jan  5 13:02:29 2012] Fit fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jan  5 15:22:24 2012] Spatial fit model total counts = 35096.100000, observed total counts = 35096.000000
[Thu Jan  5 15:22:24 2012] Offset between fit and detection position for source 5 = 0.216612 pixels
[Thu Jan  5 15:22:24 2012] 35195.540000 total counts/ 7859.840000 bgd. counts: snr = 308.335370
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.216612 pixels
  Position = (289.5, 277.4) = 14 9 24.03 26 18 21.0
  Extent = 5.7 (5.6-5.7)", rotation angle = 0
  Source counts = 27335.7 +/- 187.6
  Background counts = 7859.8
  Rate = 0.4 +/- 0.003
[Thu Jan  5 15:22:24 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 15:22:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 15:22:24 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 15:22:24 2012] Source does appear to be extended
[Thu Jan  5 15:22:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 19:18:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan  5 19:18:04 2012] Initial guess for spatial extent in simple fitting = 5.66"
[Thu Jan  5 19:18:04 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.693
[Thu Jan  5 19:18:04 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.66"
[Thu Jan  5 20:12:39 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jan  5 20:12:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_src1.csv
[Thu Jan  5 20:12:39 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jan  5 20:12:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_src1.csv
[Thu Jan  5 20:12:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 20:12:40 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jan  5 20:12:40 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jan  5 20:12:40 2012] Fit fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jan  5 21:56:46 2012] Spatial fit model total counts = 35096.000000, observed total counts = 35096.000000
[Thu Jan  5 21:56:46 2012] Offset between fit and detection position for source 5 = 0.000010 pixels
[Thu Jan  5 21:56:46 2012] 35195.450000 total counts/ 7863.150000 bgd. counts: snr = 308.232124
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.000010 pixels
  Position = (289.5, 277.4) = 14 9 24.03 26 18 21.0
  Extent = 5.7 (5.6-5.7)", rotation angle = 0
  Source counts = 27332.3 +/- 187.6
  Background counts = 7863.1
  Rate = 0.4 +/- 0.003
[Thu Jan  5 21:56:46 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 21:56:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 21:56:46 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 21:56:46 2012] Source does appear to be extended
[Thu Jan  5 21:56:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 02:40:40 2012] Counts = 27332.300000, rescaling region sizes by 3.000000
[Fri Jan  6 02:40:40 2012] XMMSAS src. selection expression = ellipse(25136.845200, 24088.840800, 1019.169029, 1019.169029, 0.000000, X, Y)
[Fri Jan  6 02:40:40 2012] Writing source region out to fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src5_src.reg
[Fri Jan  6 02:40:40 2012] Extracting stamp from image fullrun_mos1_xmm0092850101_pi300-10000_cl_sm2.00.img.gz, (231, 219) - (348, 336)
[Fri Jan  6 02:40:40 2012] XMMSAS bgd. selection expression = annulus(25136.845200, 24088.840800, 5095.845147, 10191.690293, X, Y) && !ellipse(21643.452600, 21910.727200, 404.096812, 404.096812, 0.000000, X, Y) && !ellipse(32010.652200, 17259.128200, 526.693615, 526.693615, 0.000000, X, Y) && !ellipse(25898.541107, 18408.905243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28234.998749, 16203.570206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29908.281200, 26249.390400, 361.202410, 361.202410, 0.000000, X, Y) && !ellipse(29397.796733, 19007.846150, 427.680515, 355.852621, 121.344399, X, Y) && !ellipse(31889.663540, 28114.235400, 521.170415, 521.170415, 0.000000, X, Y) && !ellipse(16349.356352, 15438.308200, 437.502413, 437.502413, 0.000000, X, Y) && !ellipse(26190.127045, 28856.238434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18374.930161, 18591.257965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14465.669006, 32858.445526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29622.392273, 26828.637695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22612.221600, 17325.190400, 421.873612, 254.681607, 156.899000, X, Y) && !ellipse(21480.717800, 30918.340000, 391.504386, 391.504386, 0.000000, X, Y) && !ellipse(26479.302216, 33121.614685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24035.515600, 27131.971000, 324.181609, 324.181609, 0.000000, X, Y) && !ellipse(24850.502380, 17800.916400, 397.620011, 397.620011, 0.000000, X, Y)
[Fri Jan  6 02:40:40 2012] Writing fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src5.gif
[Fri Jan  6 02:40:55 2012] Mean detx,y = (101.57, -70.42) 
[Fri Jan  6 02:40:59 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 02:47:54 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 02:47:55 2012] Setting source spectrum file to fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jan  6 02:47:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jan  6 05:19:53 2012] Updating aperture counts using extracted products
[Fri Jan  6 05:19:53 2012] Error reading totcts from fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jan  6 05:19:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 05:19:55 2012] Using photon index=1.80, rate=0.443, arf fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src5.arf
[Fri Jan  6 05:19:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 05:19:55 2012] Updating source flux to 3.9e-12
[Fri Jan  6 05:23:44 2012] Reading fit data from xmm0092850101/analysis//spectral/fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src5_pl.csv
[Fri Jan  6 05:23:44 2012] Spectral fit parameter nH value = 1.30446e+19
[Fri Jan  6 05:23:44 2012] Spectral fit parameter PhoIndex value = 2.32547
[Fri Jan  6 05:23:44 2012] Failed to get F(0.3-8.0) from xmm0092850101/analysis//spectral/fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Fri Jan  6 05:23:44 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 05:23:44 2012] Using Nh = 1.3e+19, photon index=2.33, rate=0.443, arf fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src5.arf
[Fri Jan  6 05:23:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 05:23:44 2012] Updating source flux to 3.2e-12