[Thu Jan  5 07:46:58 2012] Detection parameters:
  Position = (143.4, 311.6) = 14 10 11.29 26 20 50.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.6 +/- 13.6
  Background counts = 42.9
  Rate = 0.001 +/- 0.0002

[Thu Jan  5 07:46:58 2012] Off-axis axis estimate = 11.28'
[Thu Jan  5 11:29:36 2012] Using EEF radius (= 12.07 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 11:29:36 2012] Initial guess for spatial extent in simple fitting = 12.07"
[Thu Jan  5 11:29:36 2012] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.143
[Thu Jan  5 11:29:36 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 12.07"
[Thu Jan  5 13:02:29 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src28.ximg exists
[Thu Jan  5 13:02:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src28.csv
[Thu Jan  5 13:02:29 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src28_1.ximg exists
[Thu Jan  5 13:02:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src28.csv
[Thu Jan  5 13:02:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 13:02:30 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Thu Jan  5 13:02:30 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Thu Jan  5 13:02:30 2012] Fit fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Thu Jan  5 15:22:24 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 15.285643 pixels away
[Thu Jan  5 15:22:24 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 15:22:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 15:22:24 2012] Assessing source extent using major
[Thu Jan  5 15:22:24 2012] Source does appear to be extended
[Thu Jan  5 15:22:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 19:18:04 2012] Using EEF radius (= 12.07 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 19:18:04 2012] Initial guess for spatial extent in simple fitting = 12.07"
[Thu Jan  5 19:18:04 2012] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.143
[Thu Jan  5 19:18:04 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 12.07"
[Thu Jan  5 20:12:40 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_src27.ximg exists
[Thu Jan  5 20:12:40 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_src27_1.ximg exists
[Thu Jan  5 20:12:40 2012] Fit fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_src27 appears to have run properly
[Thu Jan  5 20:12:40 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Thu Jan  5 20:12:40 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Thu Jan  5 20:12:40 2012] Fit fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Thu Jan  5 21:56:46 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 10.427022 pixels away
[Thu Jan  5 21:56:46 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 21:56:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 21:56:46 2012] Assessing source extent using major
[Thu Jan  5 21:56:46 2012] Source does appear to be extended
[Thu Jan  5 21:56:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 02:40:40 2012] XMMSAS src. selection expression = ellipse(12431.470520, 27058.518097, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan  6 02:40:40 2012] Writing source region out to fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src25_src.reg
[Fri Jan  6 02:40:40 2012] Extracting stamp from image fullrun_mos1_xmm0092850101_pi300-10000_cl_sm2.00.img.gz, (106, 274) - (181, 349)
[Fri Jan  6 02:40:40 2012] XMMSAS bgd. selection expression = annulus(12431.470520, 27058.518097, 1087.500000, 2175.000000, X, Y)
[Fri Jan  6 02:40:40 2012] Writing fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src25.gif
[Fri Jan  6 03:03:52 2012] Mean detx,y = (-6527.14, 11138.10) 
[Fri Jan  6 03:03:55 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 03:04:06 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 03:04:06 2012] Setting source spectrum file to fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Fri Jan  6 03:04:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Fri Jan  6 03:52:36 2012] Not generating rmf since there are only 72 counts
[Fri Jan  6 03:52:36 2012] rmf not generated due to insufficient counts
[Fri Jan  6 05:19:54 2012] Updating aperture counts using extracted products
[Fri Jan  6 05:19:55 2012] Error reading totcts from fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Fri Jan  6 05:19:57 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 05:19:57 2012] Using photon index=1.80, rate=0.00112, arf fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src25.arf
[Fri Jan  6 05:19:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 05:19:57 2012] Updating source flux to 2.1e-14
[Fri Jan  6 05:20:03 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting