[Thu Jan  5 07:46:58 2012] Detection parameters:
  Position = (188.6, 178.0) = 14 9 56.64 26 11 8.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 167.7 +/- 18.3
  Background counts = 42.4
  Rate = 0.005 +/- 0.0005

[Thu Jan  5 07:46:58 2012] Off-axis axis estimate = 11.82'
[Thu Jan  5 11:29:36 2012] Using EEF radius (= 12.34 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 11:29:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan  5 11:29:36 2012] Initial guess for spatial extent in simple fitting = 12.34"
[Thu Jan  5 11:29:36 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.943
[Thu Jan  5 11:29:36 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 12.34"
[Thu Jan  5 13:02:29 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src10.ximg exists
[Thu Jan  5 13:02:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src10.csv
[Thu Jan  5 13:02:29 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu Jan  5 13:02:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src10.csv
[Thu Jan  5 13:02:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 13:02:30 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu Jan  5 13:02:30 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Jan  5 13:02:30 2012] Fit fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Thu Jan  5 15:22:24 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 15.729801 pixels away
[Thu Jan  5 15:22:24 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 15:22:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 15:22:24 2012] Assessing source extent using major
[Thu Jan  5 15:22:24 2012] Source does appear to be extended
[Thu Jan  5 15:22:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 19:18:04 2012] Using EEF radius (= 12.34 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 19:18:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan  5 19:18:04 2012] Initial guess for spatial extent in simple fitting = 12.34"
[Thu Jan  5 19:18:04 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.943
[Thu Jan  5 19:18:04 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 12.34"
[Thu Jan  5 20:12:39 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_src10.ximg exists
[Thu Jan  5 20:12:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_src10.csv
[Thu Jan  5 20:12:39 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu Jan  5 20:12:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_src10.csv
[Thu Jan  5 20:12:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 20:12:40 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu Jan  5 20:12:40 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Jan  5 20:12:40 2012] Fit fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Thu Jan  5 21:56:46 2012] Spatial fit model total counts = 472.319000, observed total counts = 472.000000
[Thu Jan  5 21:56:46 2012] Offset between fit and detection position for source 18 = 0.090089 pixels
[Thu Jan  5 21:56:46 2012] 473.412000 total counts/ 362.400000 bgd. counts: snr = 5.831440
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.090089 pixels
  Position = (188.5, 178.0) = 14 9 56.66 26 11 8.2
  Extent = 5.5 (4.5-6.7)", rotation angle = 0
  Source counts = 111.0 +/- 21.8
  Background counts = 362.4
  Rate = 0.002 +/- 0.0004
[Thu Jan  5 21:56:46 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 21:56:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 21:56:46 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 21:56:46 2012] Source does appear to be extended
[Thu Jan  5 21:56:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 02:40:40 2012] XMMSAS src. selection expression = ellipse(16349.356352, 15438.308200, 328.126809, 328.126809, 0.000000, X, Y)
[Fri Jan  6 02:40:40 2012] Writing source region out to fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src18_src.reg
[Fri Jan  6 02:40:40 2012] Extracting stamp from image fullrun_mos1_xmm0092850101_pi300-10000_cl_sm2.00.img.gz, (170, 159) - (207, 197)
[Fri Jan  6 02:40:40 2012] XMMSAS bgd. selection expression = annulus(16349.356352, 15438.308200, 546.878016, 1093.756031, X, Y)
[Fri Jan  6 02:40:40 2012] Writing fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src18.gif
[Fri Jan  6 02:55:07 2012] Mean detx,y = (5704.73, 10913.92) 
[Fri Jan  6 02:55:09 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 02:55:27 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 02:55:27 2012] Setting source spectrum file to fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Jan  6 02:55:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Fri Jan  6 05:19:54 2012] Updating aperture counts using extracted products
[Fri Jan  6 05:19:54 2012] Error reading totcts from fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Jan  6 05:19:57 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 05:19:57 2012] Using photon index=1.80, rate=0.0018, arf fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src18.arf
[Fri Jan  6 05:19:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 05:19:57 2012] Updating source flux to 3.8e-14