[Thu Jan  5 07:46:58 2012] Detection parameters:
  Position = (341.0, 308.9) = 14 9 7.34 26 20 39.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.2 +/- 16.9
  Background counts = 45.3
  Rate = 0.003 +/- 0.0003

[Thu Jan  5 07:46:58 2012] Off-axis axis estimate = 3.18'
[Thu Jan  5 11:29:36 2012] Using EEF radius (= 8.02 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 11:29:36 2012] Initial guess for spatial extent in simple fitting = 8.02"
[Thu Jan  5 11:29:36 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.728
[Thu Jan  5 11:29:36 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 8.02"
[Thu Jan  5 13:02:29 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src17.ximg exists
[Thu Jan  5 13:02:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src17.csv
[Thu Jan  5 13:02:29 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src17_1.ximg exists
[Thu Jan  5 13:02:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src17.csv
[Thu Jan  5 13:02:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 13:02:30 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Thu Jan  5 13:02:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Thu Jan  5 13:02:30 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Thu Jan  5 13:02:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Thu Jan  5 13:02:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 15:22:24 2012] Spatial fit model total counts = 465.465000, observed total counts = 640.000000
[Thu Jan  5 15:22:24 2012] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jan  5 15:22:24 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 15:22:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 15:22:24 2012] Assessing source extent using major
[Thu Jan  5 15:22:24 2012] Source does appear to be extended
[Thu Jan  5 15:22:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 15:22:24 2012] Source is confused with source 13
[Thu Jan  5 19:18:04 2012] Using EEF radius (= 8.02 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 19:18:04 2012] Initial guess for spatial extent in simple fitting = 8.02"
[Thu Jan  5 19:18:04 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.728
[Thu Jan  5 19:18:04 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 8.02"
[Thu Jan  5 20:12:40 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_src17.ximg exists
[Thu Jan  5 20:12:40 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_src17_1.ximg exists
[Thu Jan  5 20:12:40 2012] Fit fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_src17 appears to have run properly
[Thu Jan  5 20:12:40 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Thu Jan  5 20:12:40 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Thu Jan  5 20:12:40 2012] Fit fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Thu Jan  5 21:56:46 2012] Source 12 is offset by -3.335721 and 6.306663 pixels which is larger than
2 X fitted extent = 1.922579 x 1.922579, not incorporating fit results
[Thu Jan  5 21:56:46 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 21:56:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 21:56:46 2012] Assessing source extent using major
[Thu Jan  5 21:56:46 2012] Source does appear to be extended
[Thu Jan  5 21:56:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 02:40:40 2012] XMMSAS src. selection expression = ellipse(29622.392273, 26828.637695, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan  6 02:40:40 2012] Writing source region out to fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src12_src.reg
[Fri Jan  6 02:40:40 2012] Extracting stamp from image fullrun_mos1_xmm0092850101_pi300-10000_cl_sm2.00.img.gz, (304, 271) - (379, 346)
[Fri Jan  6 02:40:40 2012] XMMSAS bgd. selection expression = annulus(29622.392273, 26828.637695, 1087.500000, 2175.000000, X, Y) && !ellipse(29908.281200, 26249.390400, 361.202410, 361.202410, 0.000000, X, Y) && !ellipse(31889.663540, 28114.235400, 521.170415, 521.170415, 0.000000, X, Y)
[Fri Jan  6 02:40:40 2012] Writing fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src12.gif
[Fri Jan  6 02:59:08 2012] Mean detx,y = (-1004.59, -5184.89) 
[Fri Jan  6 02:59:10 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 02:59:59 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 02:59:59 2012] Setting source spectrum file to fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Jan  6 02:59:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri Jan  6 03:51:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan  6 03:51:41 2012] rmf not generated due to insufficient counts
[Fri Jan  6 05:19:54 2012] Updating aperture counts using extracted products
[Fri Jan  6 05:19:54 2012] Error reading totcts from fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Jan  6 05:19:57 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 05:19:57 2012] Using photon index=1.80, rate=0.0026, arf fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src12.arf
[Fri Jan  6 05:19:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 05:19:57 2012] Updating source flux to 3.2e-14
[Fri Jan  6 05:20:03 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting