[Thu Jan  5 07:46:57 2012] Detection parameters:
  Position = (249.3, 252.3) = 14 9 37.01 26 16 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1483.6 +/- 48.0
  Background counts = 52.7
  Rate = 0.02 +/- 0.0008

[Thu Jan  5 07:46:58 2012] Off-axis axis estimate = 4.89'
[Thu Jan  5 11:29:35 2012] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 11:29:35 2012] Initial guess for spatial extent in simple fitting = 8.87"
[Thu Jan  5 11:29:35 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.969
[Thu Jan  5 11:29:35 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.87"
[Thu Jan  5 13:02:29 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src2.ximg exists
[Thu Jan  5 13:02:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src2.csv
[Thu Jan  5 13:02:29 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Jan  5 13:02:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src2.csv
[Thu Jan  5 13:02:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 13:02:29 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Jan  5 13:02:29 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Jan  5 13:02:29 2012] Fit fullrun_mos1_xmm0092850101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Jan  5 15:22:24 2012] Spatial fit model total counts = 1596.000000, observed total counts = 1596.000000
[Thu Jan  5 15:22:24 2012] Offset between fit and detection position for source 1 = 0.138382 pixels
[Thu Jan  5 15:22:24 2012] 1599.203000 total counts/ 638.265000 bgd. counts: snr = 38.036001
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.138382 pixels
  Position = (249.3, 252.4) = 14 9 37.01 26 16 32.0
  Extent = 5.1 (4.8-5.3)", rotation angle = 0
  Source counts = 960.9 +/- 40.0
  Background counts = 638.3
  Rate = 0.02 +/- 0.0006
[Thu Jan  5 15:22:24 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 15:22:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 15:22:24 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 15:22:24 2012] Source does appear to be extended
[Thu Jan  5 15:22:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 19:18:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan  5 19:18:04 2012] Initial guess for spatial extent in simple fitting = 5.05"
[Thu Jan  5 19:18:04 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.815
[Thu Jan  5 19:18:04 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.05"
[Thu Jan  5 20:12:39 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_src2.ximg exists
[Thu Jan  5 20:12:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_src2.csv
[Thu Jan  5 20:12:39 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Jan  5 20:12:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_src2.csv
[Thu Jan  5 20:12:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 20:12:40 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Jan  5 20:12:40 2012] fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Jan  5 20:12:40 2012] Fit fullrun_mos1_xmm0092850101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Jan  5 21:56:46 2012] Spatial fit model total counts = 1596.000000, observed total counts = 1596.000000
[Thu Jan  5 21:56:46 2012] Offset between fit and detection position for source 1 = 0.000000 pixels
[Thu Jan  5 21:56:46 2012] 1599.207000 total counts/ 638.265000 bgd. counts: snr = 38.036160
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000000 pixels
  Position = (249.3, 252.4) = 14 9 37.01 26 16 32.0
  Extent = 5.1 (4.8-5.3)", rotation angle = 0
  Source counts = 960.9 +/- 40.0
  Background counts = 638.3
  Rate = 0.02 +/- 0.0006
[Thu Jan  5 21:56:46 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 21:56:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 21:56:46 2012] Assessing source extent using major axis lower bound
[Thu Jan  5 21:56:46 2012] Source does appear to be extended
[Thu Jan  5 21:56:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 02:40:40 2012] XMMSAS src. selection expression = ellipse(21643.452600, 21910.727200, 303.072609, 303.072609, 0.000000, X, Y)
[Fri Jan  6 02:40:40 2012] Writing source region out to fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src1_src.reg
[Fri Jan  6 02:40:40 2012] Extracting stamp from image fullrun_mos1_xmm0092850101_pi300-10000_cl_sm2.00.img.gz, (232, 235) - (267, 270)
[Fri Jan  6 02:40:40 2012] XMMSAS bgd. selection expression = annulus(21643.452600, 21910.727200, 505.121015, 1010.242029, X, Y)
[Fri Jan  6 02:40:40 2012] Writing fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src1.gif
[Fri Jan  6 02:48:03 2012] Mean detx,y = (1127.12, 3914.12) 
[Fri Jan  6 02:48:06 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 02:48:16 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 02:48:16 2012] Setting source spectrum file to fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jan  6 02:48:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jan  6 05:19:53 2012] Updating aperture counts using extracted products
[Fri Jan  6 05:19:53 2012] Error reading totcts from fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jan  6 05:19:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 05:19:55 2012] Using photon index=1.80, rate=0.0156, arf fullrun_mos1_xmm0092850101_pi300-10000_pass1_cl_src1.arf
[Fri Jan  6 05:19:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 05:19:55 2012] Updating source flux to 2.1e-13