[Mon Jun 10 01:00:13 2013] Detection parameters: Position = (378.7, 209.8) = 13 1 59.03 -63 58 9.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 18462.8 +/- 159.0 Background counts = 25.8 Rate = 0.8 +/- 0.007 [Mon Jun 10 01:00:14 2013] Off-axis axis estimate = 8.67' [Mon Jun 10 01:57:13 2013] Using EEF radius (= 10.76 ")to estimate initial spatial extent for simple fitting [Mon Jun 10 01:57:13 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon Jun 10 01:57:13 2013] Initial guess for spatial extent in simple fitting = 10.76" [Mon Jun 10 01:57:13 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.017 [Mon Jun 10 01:57:13 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 10.76" [Mon Jun 10 02:26:57 2013] fullrun_mos2_xmm0092820301_pi300-10000_cl_pass0_src1.ximg exists [Mon Jun 10 02:26:57 2013] fullrun_mos2_xmm0092820301_pi300-10000_cl_pass0_src1_1.ximg exists [Mon Jun 10 02:26:57 2013] Fit fullrun_mos2_xmm0092820301_pi300-10000_cl_pass0_src1 appears to have run properly [Mon Jun 10 02:26:58 2013] fullrun_mos2_xmm0092820301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Mon Jun 10 02:26:58 2013] fullrun_mos2_xmm0092820301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Mon Jun 10 02:26:58 2013] Fit fullrun_mos2_xmm0092820301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Mon Jun 10 02:27:06 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.648413 pixels away [Mon Jun 10 02:27:06 2013] Vigneting correction estimate = 1.000000 [Mon Jun 10 02:27:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 10 02:27:06 2013] Assessing source extent using major [Mon Jun 10 02:27:06 2013] Source does appear to be extended [Mon Jun 10 02:27:06 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 10 02:52:33 2013] Using EEF radius (= 10.76 ")to estimate initial spatial extent for simple fitting [Mon Jun 10 02:52:33 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon Jun 10 02:52:33 2013] Initial guess for spatial extent in simple fitting = 10.76" [Mon Jun 10 02:52:33 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.017 [Mon Jun 10 02:52:33 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 10.76" [Mon Jun 10 03:22:35 2013] fullrun_mos2_xmm0092820301_pi300-10000_cl_pass1_src1.ximg exists [Mon Jun 10 03:22:35 2013] fullrun_mos2_xmm0092820301_pi300-10000_cl_pass1_src1_1.ximg exists [Mon Jun 10 03:22:35 2013] Fit fullrun_mos2_xmm0092820301_pi300-10000_cl_pass1_src1 appears to have run properly [Mon Jun 10 03:22:35 2013] fullrun_mos2_xmm0092820301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Mon Jun 10 03:22:35 2013] fullrun_mos2_xmm0092820301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Mon Jun 10 03:22:35 2013] Fit fullrun_mos2_xmm0092820301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Mon Jun 10 03:22:46 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.648413 pixels away [Mon Jun 10 03:22:46 2013] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 31.318346 pixels away [Mon Jun 10 03:22:46 2013] Vigneting correction estimate = 1.000000 [Mon Jun 10 03:22:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jun 10 03:22:46 2013] Assessing source extent using major [Mon Jun 10 03:22:46 2013] Source does appear to be extended [Mon Jun 10 03:22:46 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 10 03:55:39 2013] Counts = 18462.832031, rescaling region sizes by 3.000000 [Mon Jun 10 03:55:39 2013] XMMSAS src. selection expression = ellipse(32897.495697, 18205.938873, 1957.500000, 1957.500000, 0.000000, X, Y) [Mon Jun 10 03:55:39 2013] Writing source region out to fullrun_mos2_xmm0092820301_pi300-10000_pass1_cl_src1_src.reg [Mon Jun 10 03:55:39 2013] Extracting stamp from image fullrun_mos2_xmm0092820301_pi300-10000_cl_sm2.00.img.gz, (266, 97) - (491, 322) [Mon Jun 10 03:55:39 2013] XMMSAS bgd. selection expression = annulus(32897.495697, 18205.938873, 9787.500000, 19575.000000, X, Y) && !ellipse(26451.101800, 27802.420200, 430.873612, 393.036811, 347.720900, X, Y) && !ellipse(22129.751600, 36769.498400, 543.897616, 330.526410, 344.879597, X, Y) && !ellipse(18821.445023, 21294.126907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17275.799360, 19855.739820, 570.830416, 366.946411, 63.871119, X, Y) && !ellipse(36679.784058, 33073.733887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21634.559800, 30241.029000, 373.870411, 373.870411, 0.000000, X, Y) && !ellipse(33052.252800, 25692.675600, 387.307211, 387.307211, 0.000000, X, Y) && !ellipse(25210.957800, 25151.157200, 343.309610, 343.309610, 0.000000, X, Y) && !ellipse(20595.099800, 19510.768200, 640.402649, 640.402649, 0.000000, X, Y) && !ellipse(31621.750000, 17569.991000, 1692.296049, 211.536806, 154.306097, X, Y) && !ellipse(22380.514300, 23181.026000, 299.980809, 299.980809, 0.000000, X, Y) && !ellipse(23242.823800, 22971.505000, 553.984816, 220.570406, 141.132000, X, Y) && !ellipse(26267.604200, 25058.624600, 543.333616, 543.333616, 0.000000, X, Y) [Mon Jun 10 03:55:39 2013] Writing fullrun_mos2_xmm0092820301_pi300-10000_pass1_cl_src1.gif [Mon Jun 10 03:55:48 2013] Mean detx,y = (-3614.20, -10841.88) [Mon Jun 10 03:55:52 2013] Setting backscal keywords in source and bgd. spectrum [Mon Jun 10 04:03:14 2013] Binned source spectrum to 10 counts/bin [Mon Jun 10 04:03:14 2013] Setting source spectrum file to fullrun_mos2_xmm0092820301_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Mon Jun 10 04:03:14 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0092820301_pi300-10000_pass1_cl_src1_bgd.pi.gz [Mon Jun 10 04:07:53 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon Jun 10 04:07:53 2013] rmf not generated due to insufficient counts [Mon Jun 10 04:21:02 2013] Updating aperture counts using extracted products [Mon Jun 10 04:21:02 2013] Total counts from fullrun_mos2_xmm0092820301_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 19226.00 [Mon Jun 10 04:21:02 2013] Total counts from fullrun_mos2_xmm0092820301_pi300-10000_pass1_cl_src1_bgd.pi.gz = 24872.00 [Mon Jun 10 04:21:02 2013] Got source and background scale factors 12028680.000000, 354499789.000000 [Mon Jun 10 04:21:02 2013] User source parameters: Position = (378.7, 209.8) = 13 1 59.03 -63 58 9.4 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 18382.1 +/- 139.7 Background aperture counts = 843.9 Rate = 0.5 +/- 0.004 [Mon Jun 10 04:21:02 2013] Updating counts from extracted products [Mon Jun 10 04:21:02 2013] Set source signif. to 18382.06/29.05 = 632.76 [Mon Jun 10 04:21:04 2013] Calculating source flux in energy range 0.30-8.00 [Mon Jun 10 04:21:04 2013] Using photon index=1.80, rate=0.471, arf fullrun_mos2_xmm0092820301_pi300-10000_pass1_cl_src1.arf [Mon Jun 10 04:21:04 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jun 10 04:21:04 2013] Updating source flux to 1.2e-11 [Mon Jun 10 04:21:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon Jun 10 04:21:12 2013] xmm0092820301/analysis//spectral/fullrun_mos2_xmm0092820301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete