[Sat Jul 21 11:12:33 2012] Detection parameters: Position = (308.2, 320.8) = 8 31 41.77 52 45 18.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 12437.1 +/- 133.8 Background counts = 145.8 Rate = 0.2 +/- 0.002 [Sat Jul 21 11:12:36 2012] Off-axis axis estimate = 1.77' [Sat Jul 21 11:19:44 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting [Sat Jul 21 11:19:44 2012] Initial guess for spatial extent in simple fitting = 7.31" [Sat Jul 21 11:19:44 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841 [Sat Jul 21 11:19:44 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31" [Sat Jul 21 13:16:45 2012] fullrun_pn_xmm0092800201_pi300-10000_cl_pass0_src1.ximg exists [Sat Jul 21 13:16:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092800201_pi300-10000_cl_pass0_src1.csv [Sat Jul 21 13:16:45 2012] fullrun_pn_xmm0092800201_pi300-10000_cl_pass0_src1_1.ximg exists [Sat Jul 21 13:16:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092800201_pi300-10000_cl_pass0_src1.csv [Sat Jul 21 13:16:45 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0092800201_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0092800201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jul 21 13:16:46 2012] fullrun_pn_xmm0092800201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Sat Jul 21 13:16:46 2012] fullrun_pn_xmm0092800201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Sat Jul 21 13:16:46 2012] Fit fullrun_pn_xmm0092800201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Sat Jul 21 14:38:08 2012] Spatial fit model total counts = 10587.300000, observed total counts = 10396.000000 [Sat Jul 21 14:38:08 2012] Offset between fit and detection position for source 1 = 0.215419 pixels [Sat Jul 21 14:38:08 2012] 10599.110000 total counts/ 2779.500000 bgd. counts: snr = 148.320696 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.215419 pixels Position = (308.1, 320.6) = 8 31 41.85 52 45 17.9 Extent = 5.7 (5.5-5.8)", rotation angle = 0 Source counts = 7819.6 +/- 103.0 Background counts = 2779.5 Rate = 0.1 +/- 0.001 [Sat Jul 21 14:38:08 2012] Vigneting correction estimate = 1.000000 [Sat Jul 21 14:38:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jul 21 14:38:08 2012] Assessing source extent using major axis lower bound [Sat Jul 21 14:38:08 2012] Source does appear to be extended [Sat Jul 21 14:38:08 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jul 21 14:38:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Jul 21 14:38:41 2012] Initial guess for spatial extent in simple fitting = 5.65" [Sat Jul 21 14:38:41 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.927 [Sat Jul 21 14:38:41 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.65" [Sat Jul 21 16:28:51 2012] fullrun_pn_xmm0092800201_pi300-10000_cl_pass1_src1.ximg exists [Sat Jul 21 16:28:51 2012] fullrun_pn_xmm0092800201_pi300-10000_cl_pass1_src1_1.ximg exists [Sat Jul 21 16:28:51 2012] Fit fullrun_pn_xmm0092800201_pi300-10000_cl_pass1_src1 appears to have run properly [Sat Jul 21 16:28:52 2012] fullrun_pn_xmm0092800201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Sat Jul 21 16:28:52 2012] fullrun_pn_xmm0092800201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Sat Jul 21 16:28:52 2012] Fit fullrun_pn_xmm0092800201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Sat Jul 21 17:47:06 2012] Spatial fit model total counts = 10545.300000, observed total counts = 10470.000000 [Sat Jul 21 17:47:06 2012] Offset between fit and detection position for source 1 = 0.006334 pixels [Sat Jul 21 17:47:06 2012] 10575.580000 total counts/ 2732.370000 bgd. counts: snr = 150.045885 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.006334 pixels Position = (308.1, 320.6) = 8 31 41.85 52 45 17.9 Extent = 5.7 (5.6-5.8)", rotation angle = 0 Source counts = 7843.2 +/- 102.8 Background counts = 2732.4 Rate = 0.1 +/- 0.001 [Sat Jul 21 17:47:07 2012] Vigneting correction estimate = 1.000000 [Sat Jul 21 17:47:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jul 21 17:47:07 2012] Assessing source extent using major axis lower bound [Sat Jul 21 17:47:07 2012] Source does appear to be extended [Sat Jul 21 17:47:07 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jul 21 17:47:34 2012] Counts = 7843.210000, rescaling region sizes by 2.000000 [Sat Jul 21 17:47:34 2012] XMMSAS src. selection expression = ellipse(26753.199020, 27844.872600, 680.538020, 680.538020, 0.000000, X, Y) [Sat Jul 21 17:47:34 2012] Writing source region out to fullrun_pn_xmm0092800201_pi300-10000_pass1_cl_src1_src.reg [Sat Jul 21 17:47:34 2012] Extracting stamp from image fullrun_pn_xmm0092800201_pi300-10000_cl_sm2.00.img.gz, (269, 282) - (347, 360) [Sat Jul 21 17:47:34 2012] XMMSAS bgd. selection expression = annulus(26753.199020, 27844.872600, 2268.460065, 4536.920131, X, Y) && !ellipse(31174.578156, 32216.103668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22442.557400, 26152.783400, 478.561614, 478.561614, 0.000000, X, Y) && !ellipse(27224.460000, 24015.558400, 496.402414, 496.402414, 0.000000, X, Y) && !ellipse(24993.319489, 31724.854218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27667.857000, 30951.164000, 346.995210, 346.995210, 0.000000, X, Y) && !ellipse(28091.585400, 30324.438000, 386.860011, 386.860011, 0.000000, X, Y) && !ellipse(21996.219200, 29505.136600, 303.701609, 303.701609, 0.000000, X, Y) && !ellipse(25698.228460, 29440.710400, 291.094408, 291.094408, 0.000000, X, Y) && !ellipse(27124.622000, 25821.538000, 373.625611, 373.625611, 0.000000, X, Y) && !ellipse(27784.103088, 25298.762024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29681.557800, 24456.548600, 341.385610, 341.385610, 0.000000, X, Y) && !ellipse(31237.459869, 22811.557129, 870.000000, 870.000000, 0.000000, X, Y) [Sat Jul 21 17:47:34 2012] Writing fullrun_pn_xmm0092800201_pi300-10000_pass1_cl_src1.gif [Sat Jul 21 17:48:15 2012] Mean detx,y = (107.45, -273.24) [Sat Jul 21 17:48:23 2012] Setting backscal keywords in source and bgd. spectrum [Sat Jul 21 17:49:35 2012] Binned source spectrum to 10 counts/bin [Sat Jul 21 17:49:35 2012] Setting source spectrum file to fullrun_pn_xmm0092800201_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Sat Jul 21 17:49:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0092800201_pi300-10000_pass1_cl_src1_bgd.pi.gz [Sat Jul 21 21:10:01 2012] Updating aperture counts using extracted products [Sat Jul 21 21:10:01 2012] Error reading totcts from fullrun_pn_xmm0092800201_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Sat Jul 21 21:10:02 2012] Calculating source flux in energy range 0.30-8.00 [Sat Jul 21 21:10:02 2012] Using photon index=1.80, rate=0.108, arf fullrun_pn_xmm0092800201_pi300-10000_pass1_cl_src1.arf [Sat Jul 21 21:10:02 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jul 21 21:10:02 2012] Updating source flux to 2.7e-13 [Sat Jul 21 21:13:00 2012] Reading fit data from xmm0092800201/analysis//spectral/fullrun_pn_xmm0092800201_pi300-10000_pass1_cl_src1_pl.csv [Sat Jul 21 21:13:00 2012] Spectral fit parameter nH value = 2.15365e+21 [Sat Jul 21 21:13:00 2012] Spectral fit parameter PhoIndex value = 2.11694 [Sat Jul 21 21:13:00 2012] Failed to get F(0.3-8.0) from xmm0092800201/analysis//spectral/fullrun_pn_xmm0092800201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Sat Jul 21 21:13:00 2012] Calculating source flux in energy range 0.30-8.00 [Sat Jul 21 21:13:00 2012] Using Nh = 2.2e+21, photon index=2.12, rate=0.108, arf fullrun_pn_xmm0092800201_pi300-10000_pass1_cl_src1.arf [Sat Jul 21 21:13:00 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jul 21 21:13:01 2012] Updating source flux to 3.3e-13