[Sat Jul 21 11:13:23 2012] Detection parameters:
  Position = (441.1, 461.7) = 8 30 37.83 52 55 31.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 178.5 +/- 18.4
  Background counts = 40.1
  Rate = 0.002 +/- 0.0002

[Sat Jul 21 11:13:24 2012] Off-axis axis estimate = 15.72'
[Sat Jul 21 13:16:47 2012] Using EEF radius (= 14.29 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 13:16:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 21 13:16:47 2012] Initial guess for spatial extent in simple fitting = 14.29"
[Sat Jul 21 13:16:47 2012] source mask rpix=3.3, npix_max = 57, mask sum = 58, frac = 1.012
[Sat Jul 21 13:16:47 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 14.29"
[Sat Jul 21 14:35:56 2012] fullrun_mos1_xmm0092800201_pi300-10000_cl_pass0_src18.ximg exists
[Sat Jul 21 14:35:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0092800201_pi300-10000_cl_pass0_src18.csv
[Sat Jul 21 14:35:56 2012] fullrun_mos1_xmm0092800201_pi300-10000_cl_pass0_src18_1.ximg exists
[Sat Jul 21 14:35:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0092800201_pi300-10000_cl_pass0_src18.csv
[Sat Jul 21 14:35:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092800201_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092800201_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 14:35:57 2012] fullrun_mos1_xmm0092800201_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sat Jul 21 14:35:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0092800201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sat Jul 21 14:35:57 2012] fullrun_mos1_xmm0092800201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sat Jul 21 14:35:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0092800201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sat Jul 21 14:35:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092800201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092800201_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 14:38:19 2012] Spatial fit model total counts = -85.993000, observed total counts = 425.000000
[Sat Jul 21 14:38:19 2012] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 21 14:38:20 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 14:38:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 14:38:20 2012] Assessing source extent using major
[Sat Jul 21 14:38:20 2012] Source does appear to be extended
[Sat Jul 21 14:38:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 16:28:53 2012] Using EEF radius (= 14.29 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 16:28:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 21 16:28:53 2012] Initial guess for spatial extent in simple fitting = 14.29"
[Sat Jul 21 16:28:53 2012] source mask rpix=3.3, npix_max = 57, mask sum = 58, frac = 1.012
[Sat Jul 21 16:28:53 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 14.29"
[Sat Jul 21 17:45:10 2012] fullrun_mos1_xmm0092800201_pi300-10000_cl_pass1_src18.ximg exists
[Sat Jul 21 17:45:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092800201_pi300-10000_cl_pass1_src18.csv
[Sat Jul 21 17:45:10 2012] fullrun_mos1_xmm0092800201_pi300-10000_cl_pass1_src18_1.ximg exists
[Sat Jul 21 17:45:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092800201_pi300-10000_cl_pass1_src18.csv
[Sat Jul 21 17:45:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092800201_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092800201_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 17:45:11 2012] fullrun_mos1_xmm0092800201_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sat Jul 21 17:45:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0092800201_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sat Jul 21 17:45:11 2012] fullrun_mos1_xmm0092800201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sat Jul 21 17:45:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0092800201_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sat Jul 21 17:45:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092800201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092800201_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 17:47:16 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 16.419134 pixels away
[Sat Jul 21 17:47:16 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 17:47:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 17:47:16 2012] Assessing source extent using major
[Sat Jul 21 17:47:16 2012] Source does appear to be extended
[Sat Jul 21 17:47:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 20:09:03 2012] XMMSAS src. selection expression = ellipse(38327.163361, 40123.195099, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 21 20:09:03 2012] Writing source region out to fullrun_mos1_xmm0092800201_pi300-10000_pass1_cl_src20_src.reg
[Sat Jul 21 20:09:03 2012] Extracting stamp from image fullrun_mos1_xmm0092800201_pi300-10000_cl_sm2.00.img.gz, (404, 424) - (479, 499)
[Sat Jul 21 20:09:03 2012] XMMSAS bgd. selection expression = annulus(38327.163361, 40123.195099, 1087.500000, 2175.000000, X, Y)
[Sat Jul 21 20:09:03 2012] Writing fullrun_mos1_xmm0092800201_pi300-10000_pass1_cl_src20.gif
[Sat Jul 21 20:17:50 2012] Mean detx,y = (10331.45, 13228.43) 
[Sat Jul 21 20:17:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 20:18:13 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 20:18:13 2012] Setting source spectrum file to fullrun_mos1_xmm0092800201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat Jul 21 20:18:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0092800201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sat Jul 21 20:57:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 21 20:57:06 2012] rmf not generated due to insufficient counts
[Sat Jul 21 21:10:04 2012] Updating aperture counts using extracted products
[Sat Jul 21 21:10:04 2012] Error reading totcts from fullrun_mos1_xmm0092800201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat Jul 21 21:10:05 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 21:10:05 2012] Using photon index=1.80, rate=0.00191, arf fullrun_mos1_xmm0092800201_pi300-10000_pass1_cl_src20.arf
[Sat Jul 21 21:10:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 21:10:05 2012] Updating source flux to 6.5e-14
[Sat Jul 21 21:10:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting