[Sat Jul 21 11:13:22 2012] Detection parameters:
  Position = (308.3, 320.7) = 8 31 41.75 52 45 17.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4800.0 +/- 83.3
  Background counts = 56.6
  Rate = 0.05 +/- 0.0009

[Sat Jul 21 11:13:24 2012] Off-axis axis estimate = 1.77'
[Sat Jul 21 13:16:47 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 13:16:47 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Sat Jul 21 13:16:47 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841
[Sat Jul 21 13:16:47 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Sat Jul 21 14:35:56 2012] fullrun_mos1_xmm0092800201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 21 14:35:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092800201_pi300-10000_cl_pass0_src1.csv
[Sat Jul 21 14:35:56 2012] fullrun_mos1_xmm0092800201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 21 14:35:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092800201_pi300-10000_cl_pass0_src1.csv
[Sat Jul 21 14:35:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092800201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092800201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 14:35:57 2012] fullrun_mos1_xmm0092800201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 21 14:35:57 2012] fullrun_mos1_xmm0092800201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 21 14:35:57 2012] Fit fullrun_mos1_xmm0092800201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 21 14:38:19 2012] Spatial fit model total counts = 4209.000000, observed total counts = 4209.000000
[Sat Jul 21 14:38:19 2012] Offset between fit and detection position for source 1 = 0.210769 pixels
[Sat Jul 21 14:38:19 2012] 4193.330000 total counts/ 1173.890000 bgd. counts: snr = 88.127754
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.210769 pixels
  Position = (308.1, 320.6) = 8 31 41.81 52 45 17.7
  Extent = 5.2 (5.0-5.3)", rotation angle = 0
  Source counts = 3019.4 +/- 64.8
  Background counts = 1173.9
  Rate = 0.04 +/- 0.0008
[Sat Jul 21 14:38:20 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 14:38:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 14:38:20 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 14:38:20 2012] Source does appear to be extended
[Sat Jul 21 14:38:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 16:28:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 21 16:28:53 2012] Initial guess for spatial extent in simple fitting = 5.20"
[Sat Jul 21 16:28:53 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.043
[Sat Jul 21 16:28:53 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.20"
[Sat Jul 21 17:45:10 2012] fullrun_mos1_xmm0092800201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 21 17:45:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092800201_pi300-10000_cl_pass1_src1.csv
[Sat Jul 21 17:45:10 2012] fullrun_mos1_xmm0092800201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 21 17:45:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092800201_pi300-10000_cl_pass1_src1.csv
[Sat Jul 21 17:45:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092800201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092800201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 17:45:11 2012] fullrun_mos1_xmm0092800201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 21 17:45:11 2012] fullrun_mos1_xmm0092800201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 21 17:45:11 2012] Fit fullrun_mos1_xmm0092800201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 21 17:47:16 2012] Spatial fit model total counts = 4212.360000, observed total counts = 4212.000000
[Sat Jul 21 17:47:16 2012] Offset between fit and detection position for source 1 = 0.008631 pixels
[Sat Jul 21 17:47:16 2012] 4210.490000 total counts/ 1183.640000 bgd. counts: snr = 87.979418
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.008631 pixels
  Position = (308.1, 320.6) = 8 31 41.81 52 45 17.6
  Extent = 5.2 (5.1-5.4)", rotation angle = 0
  Source counts = 3026.8 +/- 64.9
  Background counts = 1183.6
  Rate = 0.04 +/- 0.0008
[Sat Jul 21 17:47:16 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 17:47:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 17:47:16 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 17:47:16 2012] Source does appear to be extended
[Sat Jul 21 17:47:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 20:09:03 2012] Counts = 3026.850000, rescaling region sizes by 2.000000
[Sat Jul 21 20:09:03 2012] XMMSAS src. selection expression = ellipse(26759.329720, 27839.908800, 624.932418, 624.932418, 0.000000, X, Y)
[Sat Jul 21 20:09:03 2012] Writing source region out to fullrun_mos1_xmm0092800201_pi300-10000_pass1_cl_src1_src.reg
[Sat Jul 21 20:09:03 2012] Extracting stamp from image fullrun_mos1_xmm0092800201_pi300-10000_cl_sm2.00.img.gz, (272, 285) - (344, 356)
[Sat Jul 21 20:09:03 2012] XMMSAS bgd. selection expression = annulus(26759.329720, 27839.908800, 2083.108060, 4166.216120, X, Y) && !ellipse(22463.161600, 26144.778000, 407.281612, 407.281612, 0.000000, X, Y) && !ellipse(31195.518372, 31998.563843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27232.313660, 24023.471802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28107.410000, 30351.490000, 386.478411, 386.478411, 0.000000, X, Y) && !ellipse(27076.936000, 25742.475600, 380.213611, 380.213611, 0.000000, X, Y)
[Sat Jul 21 20:09:03 2012] Writing fullrun_mos1_xmm0092800201_pi300-10000_pass1_cl_src1.gif
[Sat Jul 21 20:09:08 2012] Mean detx,y = (341.70, -203.99) 
[Sat Jul 21 20:09:09 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 20:09:23 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 20:09:23 2012] Setting source spectrum file to fullrun_mos1_xmm0092800201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 21 20:09:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0092800201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jul 21 21:10:04 2012] Updating aperture counts using extracted products
[Sat Jul 21 21:10:04 2012] Error reading totcts from fullrun_mos1_xmm0092800201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 21 21:10:04 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 21:10:04 2012] Using photon index=1.80, rate=0.0366, arf fullrun_mos1_xmm0092800201_pi300-10000_pass1_cl_src1.arf
[Sat Jul 21 21:10:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 21:10:04 2012] Updating source flux to 3.7e-13
[Sat Jul 21 21:11:25 2012] Reading fit data from xmm0092800201/analysis//spectral/fullrun_mos1_xmm0092800201_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jul 21 21:11:25 2012] Spectral fit parameter nH value = 1.94043e+21
[Sat Jul 21 21:11:25 2012] Spectral fit parameter PhoIndex value = 2.01422
[Sat Jul 21 21:11:25 2012] Failed to get F(0.3-8.0) from xmm0092800201/analysis//spectral/fullrun_mos1_xmm0092800201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jul 21 21:11:25 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 21:11:25 2012] Using Nh = 1.9e+21, photon index=2.01, rate=0.0366, arf fullrun_mos1_xmm0092800201_pi300-10000_pass1_cl_src1.arf
[Sat Jul 21 21:11:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 21:11:25 2012] Updating source flux to 3.9e-13