[Wed Oct  5 02:11:28 2011] Detection parameters:
  Position = (171.8, 297.1) = 8 32 38.51 52 46 50.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.2 +/- 9.1
  Background counts = 4.7
  Rate = 0.004 +/- 0.0009

[Wed Oct  5 02:11:28 2011] Off-axis axis estimate = 9.18'
[Wed Oct  5 03:06:24 2011] Using EEF radius (= 11.02 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 03:06:24 2011] Initial guess for spatial extent in simple fitting = 11.02"
[Wed Oct  5 03:06:24 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.978
[Wed Oct  5 03:06:24 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 11.02"
[Wed Oct  5 03:52:01 2011] fullrun_mos1_xmm0092800101_pi300-10000_cl_pass0_src9.ximg exists
[Wed Oct  5 03:52:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092800101_pi300-10000_cl_pass0_src9.csv
[Wed Oct  5 03:52:01 2011] fullrun_mos1_xmm0092800101_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Oct  5 03:52:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092800101_pi300-10000_cl_pass0_src9.csv
[Wed Oct  5 03:52:01 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092800101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092800101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 03:52:02 2011] fullrun_mos1_xmm0092800101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Oct  5 03:52:02 2011] fullrun_mos1_xmm0092800101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Oct  5 03:52:02 2011] Fit fullrun_mos1_xmm0092800101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Oct  5 04:33:13 2011] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 12.580179 pixels away
[Wed Oct  5 04:33:13 2011] Spatial fit model total counts = 135.344000, observed total counts = 136.000000
[Wed Oct  5 04:33:13 2011] Offset between fit and detection position for source 16 = 2.102053 pixels
[Wed Oct  5 04:33:13 2011] Warning, changing simple spatial fit ID from 9 to 10
[Wed Oct  5 04:33:13 2011] 134.873300 total counts/ 64.344700 bgd. counts: snr = 8.792429
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 2.102053 pixels
  Position = (172.7, 295.2) = 8 32 38.08 52 46 37.9
  Extent = 21.8 (21.7-43.7)" x 6.6 (4.0-9.5)", rotation angle = 68 (59-76) degrees
  Source counts = 70.5 +/- 11.6
  Background counts = 64.3
  Rate = 0.004 +/- 0.0007
[Wed Oct  5 04:33:13 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 04:33:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 04:33:13 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 04:33:13 2011] Source does appear to be extended
[Wed Oct  5 04:33:13 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.28
[Wed Oct  5 04:33:13 2011] Source is asymmetric
[Wed Oct  5 04:33:13 2011] Source is confused with source 17
[Wed Oct  5 05:20:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 05:20:57 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 05:20:57 2011] Initial guess for spatial extent in simple fitting = 14.21"
[Wed Oct  5 05:20:57 2011] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.987
[Wed Oct  5 05:20:57 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 14.21"
[Wed Oct  5 05:55:52 2011] fullrun_mos1_xmm0092800101_pi300-10000_cl_pass1_src9.ximg exists
[Wed Oct  5 05:55:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092800101_pi300-10000_cl_pass1_src9.csv
[Wed Oct  5 05:55:52 2011] fullrun_mos1_xmm0092800101_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Oct  5 05:55:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092800101_pi300-10000_cl_pass1_src9.csv
[Wed Oct  5 05:55:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092800101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092800101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 05:55:52 2011] fullrun_mos1_xmm0092800101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Oct  5 05:55:52 2011] fullrun_mos1_xmm0092800101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Oct  5 05:55:52 2011] Fit fullrun_mos1_xmm0092800101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed Oct  5 06:32:05 2011] Warning, spatial fit 9 centroid is now closest to src. 17
[Wed Oct  5 06:32:06 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 06:32:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 06:32:06 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 06:32:06 2011] Source does appear to be extended
[Wed Oct  5 06:32:06 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.28
[Wed Oct  5 06:32:06 2011] Source is asymmetric
[Wed Oct  5 07:05:14 2011] XMMSAS src. selection expression = ellipse(14972.574000, 25636.808000, 1309.632038, 395.659211, 67.750300, X, Y)
[Wed Oct  5 07:05:14 2011] Writing source region out to fullrun_mos1_xmm0092800101_pi300-10000_pass1_cl_src16_src.reg
[Wed Oct  5 07:05:14 2011] Extracting stamp from image fullrun_mos1_xmm0092800101_pi300-10000_cl_sm2.00.img.gz, (97, 220) - (248, 370)
[Wed Oct  5 07:05:14 2011] XMMSAS bgd. selection expression = annulus(14972.574000, 25636.808000, 2182.720063, 4365.440126, X, Y) && !ellipse(17637.303600, 27979.544000, 261.879879, 261.879879, 0.000000, X, Y) && !ellipse(15173.682960, 25123.363600, 380.622411, 380.622411, 0.000000, X, Y) && !ellipse(11273.909400, 26931.156000, 384.455452, 384.455452, 0.000000, X, Y)
[Wed Oct  5 07:05:14 2011] Writing fullrun_mos1_xmm0092800101_pi300-10000_pass1_cl_src16.gif
[Wed Oct  5 07:09:46 2011] Mean detx,y = (-3597.38, 9363.59) 
[Wed Oct  5 07:09:47 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 07:10:32 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 07:10:32 2011] Setting source spectrum file to fullrun_mos1_xmm0092800101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Oct  5 07:10:32 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0092800101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Wed Oct  5 07:14:21 2011] Not generating rmf since there are only 70 counts
[Wed Oct  5 07:14:21 2011] rmf not generated due to insufficient counts
[Wed Oct  5 07:25:40 2011] Updating aperture counts using extracted products
[Wed Oct  5 07:25:40 2011] Error reading totcts from fullrun_mos1_xmm0092800101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Oct  5 07:25:41 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 07:25:41 2011] Using photon index=1.80, rate=0.00418, arf fullrun_mos1_xmm0092800101_pi300-10000_pass1_cl_src16.arf
[Wed Oct  5 07:25:41 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 07:25:41 2011] Updating source flux to 6.9e-14
[Wed Oct  5 07:25:43 2011] Flag c found in src. 16 procflags, skipping spectral fitting
[Wed Oct  5 07:25:43 2011] Source 16 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct  5 07:25:44 2011] xmm0092800101/analysis//spectral/fullrun_mos1_xmm0092800101_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete