[Tue Sep  4 16:36:52 2012] Detection parameters:
  Position = (226.3, 298.7) = 13 1 33.97 -83 13 47.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.9 +/- 10.0
  Background counts = 7.5
  Rate = 0.006 +/- 0.001

[Tue Sep  4 16:36:52 2012] Off-axis axis estimate = 5.23'
[Tue Sep  4 16:44:52 2012] Using EEF radius (= 9.04 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 16:44:52 2012] Initial guess for spatial extent in simple fitting = 9.04"
[Tue Sep  4 16:44:52 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.940
[Tue Sep  4 16:44:52 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.04"
[Tue Sep  4 16:53:06 2012] fullrun_mos1_xmm0092360501_pi300-10000_cl_pass0_src2.ximg exists
[Tue Sep  4 16:53:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092360501_pi300-10000_cl_pass0_src2.csv
[Tue Sep  4 16:53:06 2012] fullrun_mos1_xmm0092360501_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Sep  4 16:53:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092360501_pi300-10000_cl_pass0_src2.csv
[Tue Sep  4 16:53:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092360501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092360501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 16:53:06 2012] fullrun_mos1_xmm0092360501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Sep  4 16:53:06 2012] fullrun_mos1_xmm0092360501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Sep  4 16:53:06 2012] Fit fullrun_mos1_xmm0092360501_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Sep  4 17:01:46 2012] Warning, spatial fit 2 centroid is now closest to src. 1
[Tue Sep  4 17:01:46 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 17:01:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 17:01:46 2012] Assessing source extent using major
[Tue Sep  4 17:01:46 2012] Source does appear to be extended
[Tue Sep  4 17:01:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 17:08:20 2012] Using EEF radius (= 9.04 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 17:08:20 2012] Initial guess for spatial extent in simple fitting = 9.04"
[Tue Sep  4 17:08:20 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.940
[Tue Sep  4 17:08:20 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 9.04"
[Tue Sep  4 17:17:09 2012] fullrun_mos1_xmm0092360501_pi300-10000_cl_pass1_src2.ximg exists
[Tue Sep  4 17:17:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092360501_pi300-10000_cl_pass1_src2.csv
[Tue Sep  4 17:17:09 2012] fullrun_mos1_xmm0092360501_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Sep  4 17:17:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092360501_pi300-10000_cl_pass1_src2.csv
[Tue Sep  4 17:17:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092360501_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092360501_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 17:17:09 2012] fullrun_mos1_xmm0092360501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Sep  4 17:17:10 2012] fullrun_mos1_xmm0092360501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Sep  4 17:17:10 2012] Fit fullrun_mos1_xmm0092360501_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Sep  4 17:25:44 2012] Source 4 is offset by 5.678714 and 7.149716 pixels which is larger than
2 X fitted extent = 2.207803 x 3.181140, not incorporating fit results
[Tue Sep  4 17:25:44 2012] Spatial fit model total counts = 323.789000, observed total counts = 347.000000
[Tue Sep  4 17:25:44 2012] Offset between fit and detection position for source 4 = 6.997006 pixels
[Tue Sep  4 17:25:44 2012] 228.831230 total counts/ 0.317230 bgd. counts: snr = 405.719318
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 6.997006 pixels
  Position = (231.7, 303.2) = 13 1 20.67 -83 13 30.4
  Extent = 18.1 (18.0-36.2)", rotation angle = 0
  Source counts = 228.5 +/- 15.1
  Background counts = 0.3
  Rate = 0.02 +/- 0.001
[Tue Sep  4 17:25:44 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 17:25:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 17:25:44 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 17:25:44 2012] Source does appear to be extended
[Tue Sep  4 17:25:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 17:28:00 2012] XMMSAS src. selection expression = ellipse(20106.566000, 26330.962000, 1085.214031, 1085.214031, 0.000000, X, Y)
[Tue Sep  4 17:28:00 2012] Writing source region out to fullrun_mos1_xmm0092360501_pi300-10000_pass1_cl_src4_src.reg
[Tue Sep  4 17:28:00 2012] Extracting stamp from image fullrun_mos1_xmm0092360501_pi300-10000_cl_sm2.00.img.gz, (169, 241) - (294, 366)
[Tue Sep  4 17:28:00 2012] XMMSAS bgd. selection expression = annulus(20106.566000, 26330.962000, 1808.690052, 3617.380104, X, Y) && !ellipse(19149.312000, 25336.962000, 407.136812, 407.136812, 0.000000, X, Y)
[Tue Sep  4 17:28:00 2012] Writing fullrun_mos1_xmm0092360501_pi300-10000_pass1_cl_src4.gif
[Tue Sep  4 17:28:07 2012] Mean detx,y = (-7363.82, -641.72) 
[Tue Sep  4 17:28:08 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 17:28:27 2012] grppha failed
[Tue Sep  4 17:28:27 2012] Setting source spectrum file to fullrun_mos1_xmm0092360501_pi300-10000_pass1_cl_src4_src.pi.gz
[Tue Sep  4 17:28:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0092360501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Sep  4 17:30:42 2012] Updating aperture counts using extracted products
[Tue Sep  4 17:30:42 2012] Error reading totcts from fullrun_mos1_xmm0092360501_pi300-10000_pass1_cl_src4_src.pi.gz
[Tue Sep  4 17:30:42 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 17:30:42 2012] Flag b found in src. 4 procflags, skipping spectral fitting
[Tue Sep  4 17:30:42 2012] Source 4 has no response, skipping
[Tue Sep  4 17:30:43 2012] xmm0092360501/analysis//spectral/fullrun_mos1_xmm0092360501_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete