[Sun Jun 23 01:03:23 2013] Detection parameters:
  Position = (201.1, 229.7) = 6 15 57.10 -32 58 27.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.5 +/- 9.9
  Background counts = 7.3
  Rate = 0.006 +/- 0.001

[Sun Jun 23 01:03:23 2013] Off-axis axis estimate = 8.64'
[Sun Jun 23 01:45:30 2013] Using EEF radius (= 10.75 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 01:45:30 2013] Initial guess for spatial extent in simple fitting = 10.75"
[Sun Jun 23 01:45:30 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.020
[Sun Jun 23 01:45:30 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 10.75"
[Sun Jun 23 02:22:13 2013] fullrun_mos1_xmm0092360401_pi300-10000_cl_pass0_src9.ximg exists
[Sun Jun 23 02:22:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092360401_pi300-10000_cl_pass0_src9.csv
[Sun Jun 23 02:22:13 2013] fullrun_mos1_xmm0092360401_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Jun 23 02:22:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092360401_pi300-10000_cl_pass0_src9.csv
[Sun Jun 23 02:22:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092360401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092360401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 02:22:13 2013] fullrun_mos1_xmm0092360401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Jun 23 02:22:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092360401_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Jun 23 02:22:13 2013] fullrun_mos1_xmm0092360401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Jun 23 02:22:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092360401_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Jun 23 02:22:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092360401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092360401_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 02:50:57 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 11.967036 pixels away
[Sun Jun 23 02:50:57 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 02:50:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 02:50:57 2013] Assessing source extent using major
[Sun Jun 23 02:50:57 2013] Source does appear to be extended
[Sun Jun 23 02:50:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 03:18:22 2013] Using EEF radius (= 10.75 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 03:18:22 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 23 03:18:22 2013] Initial guess for spatial extent in simple fitting = 10.75"
[Sun Jun 23 03:18:22 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.020
[Sun Jun 23 03:18:22 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 10.75"
[Sun Jun 23 03:51:28 2013] fullrun_mos1_xmm0092360401_pi300-10000_cl_pass1_src9.ximg exists
[Sun Jun 23 03:51:28 2013] fullrun_mos1_xmm0092360401_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Jun 23 03:51:28 2013] Fit fullrun_mos1_xmm0092360401_pi300-10000_cl_pass1_src9 appears to have run properly
[Sun Jun 23 03:51:28 2013] fullrun_mos1_xmm0092360401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Jun 23 03:51:28 2013] fullrun_mos1_xmm0092360401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Jun 23 03:51:28 2013] Fit fullrun_mos1_xmm0092360401_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Jun 23 04:18:59 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 13.170676 pixels away
[Sun Jun 23 04:18:59 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 04:18:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 04:18:59 2013] Assessing source extent using major
[Sun Jun 23 04:18:59 2013] Source does appear to be extended
[Sun Jun 23 04:18:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 04:40:19 2013] XMMSAS src. selection expression = ellipse(17446.073471, 19937.359146, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 04:40:19 2013] Writing source region out to fullrun_mos1_xmm0092360401_pi300-10000_pass1_cl_src13_src.reg
[Sun Jun 23 04:40:19 2013] Extracting stamp from image fullrun_mos1_xmm0092360401_pi300-10000_cl_sm2.00.img.gz, (164, 192) - (239, 267)
[Sun Jun 23 04:40:19 2013] XMMSAS bgd. selection expression = annulus(17446.073471, 19937.359146, 1087.500000, 2175.000000, X, Y)
[Sun Jun 23 04:40:19 2013] Writing fullrun_mos1_xmm0092360401_pi300-10000_pass1_cl_src13.gif
[Sun Jun 23 04:42:57 2013] Mean detx,y = (-582.86, 8979.01) 
[Sun Jun 23 04:42:59 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 04:43:17 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 04:43:17 2013] Setting source spectrum file to fullrun_mos1_xmm0092360401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Jun 23 04:43:17 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0092360401_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sun Jun 23 04:55:01 2013] Not generating rmf since there are only 56 counts
[Sun Jun 23 04:55:01 2013] rmf not generated due to insufficient counts
[Sun Jun 23 05:10:35 2013] Updating aperture counts using extracted products
[Sun Jun 23 05:10:35 2013] Total counts from fullrun_mos1_xmm0092360401_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 96.00
[Sun Jun 23 05:10:35 2013] Total counts from fullrun_mos1_xmm0092360401_pi300-10000_pass1_cl_src13_bgd.pi.gz = 372.00
[Sun Jun 23 05:10:35 2013] Got source and background scale factors 1279076.000000, 10118224.000000
[Sun Jun 23 05:10:35 2013] User source parameters:
  Position = (201.1, 229.7) = 6 15 57.10 -32 58 27.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 49.0 +/- 10.8
  Background aperture counts = 47.0
  Rate = 0.003 +/- 0.0007

[Sun Jun 23 05:10:35 2013] Updating counts from extracted products
[Sun Jun 23 05:10:35 2013] Set source signif. to 48.97/6.86 = 7.14
[Sun Jun 23 05:10:38 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 05:10:38 2013] Using photon index=1.80, rate=0.00333, arf fullrun_mos1_xmm0092360401_pi300-10000_pass1_cl_src13.arf
[Sun Jun 23 05:10:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 05:10:38 2013] Updating source flux to 4.8e-14
[Sun Jun 23 05:10:44 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 05:10:47 2013] xmm0092360401/analysis//spectral/fullrun_mos1_xmm0092360401_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete