[Fri Jun  1 20:22:08 2012] Detection parameters:
  Position = (423.7, 327.2) = 6 14 40.16 -33 21 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 325.0 +/- 22.7
  Background counts = 22.1
  Rate = 0.02 +/- 0.002

[Fri Jun  1 20:22:08 2012] Off-axis axis estimate = 9.32'
[Fri Jun  1 20:42:47 2012] Using EEF radius (= 11.09 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 20:42:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  1 20:42:47 2012] Initial guess for spatial extent in simple fitting = 11.09"
[Fri Jun  1 20:42:47 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.968
[Fri Jun  1 20:42:47 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.09"
[Fri Jun  1 21:00:30 2012] fullrun_mos2_xmm0092360301_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun  1 21:00:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092360301_pi300-10000_cl_pass0_src1.csv
[Fri Jun  1 21:00:30 2012] fullrun_mos2_xmm0092360301_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun  1 21:00:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092360301_pi300-10000_cl_pass0_src1.csv
[Fri Jun  1 21:00:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0092360301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0092360301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 21:00:30 2012] fullrun_mos2_xmm0092360301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun  1 21:00:30 2012] fullrun_mos2_xmm0092360301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun  1 21:00:30 2012] Fit fullrun_mos2_xmm0092360301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun  1 21:00:36 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.479202 pixels away
[Fri Jun  1 21:00:36 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 21:00:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 21:00:36 2012] Assessing source extent using major
[Fri Jun  1 21:00:36 2012] Source does appear to be extended
[Fri Jun  1 21:00:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 21:22:45 2012] Using EEF radius (= 11.09 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 21:22:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  1 21:22:45 2012] Initial guess for spatial extent in simple fitting = 11.09"
[Fri Jun  1 21:22:45 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.968
[Fri Jun  1 21:22:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.09"
[Fri Jun  1 21:39:31 2012] fullrun_mos2_xmm0092360301_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun  1 21:39:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092360301_pi300-10000_cl_pass1_src1.csv
[Fri Jun  1 21:39:31 2012] fullrun_mos2_xmm0092360301_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun  1 21:39:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092360301_pi300-10000_cl_pass1_src1.csv
[Fri Jun  1 21:39:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0092360301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0092360301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 21:39:31 2012] fullrun_mos2_xmm0092360301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun  1 21:39:31 2012] fullrun_mos2_xmm0092360301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun  1 21:39:31 2012] Fit fullrun_mos2_xmm0092360301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun  1 21:39:37 2012] Spatial fit model total counts = 349.895000, observed total counts = 349.000000
[Fri Jun  1 21:39:37 2012] Offset between fit and detection position for source 2 = 0.376716 pixels
[Fri Jun  1 21:39:37 2012] 349.919000 total counts/ 136.620000 bgd. counts: snr = 18.248689
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.376716 pixels
  Position = (423.5, 327.5) = 6 14 40.24 -33 21 18.8
  Extent = 6.2 (5.6-7.0)", rotation angle = 0
  Source counts = 213.3 +/- 18.7
  Background counts = 136.6
  Rate = 0.02 +/- 0.002
[Fri Jun  1 21:39:37 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 21:39:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 21:39:37 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 21:39:37 2012] Source does appear to be extended
[Fri Jun  1 21:39:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 21:52:49 2012] XMMSAS src. selection expression = ellipse(36797.117800, 28446.539800, 371.304011, 371.304011, 0.000000, X, Y)
[Fri Jun  1 21:52:49 2012] Writing source region out to fullrun_mos2_xmm0092360301_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun  1 21:52:49 2012] Extracting stamp from image fullrun_mos2_xmm0092360301_pi300-10000_cl_sm2.00.img.gz, (402, 306) - (445, 349)
[Fri Jun  1 21:52:49 2012] XMMSAS bgd. selection expression = annulus(36797.117800, 28446.539800, 618.840018, 1237.680036, X, Y)
[Fri Jun  1 21:52:49 2012] Writing fullrun_mos2_xmm0092360301_pi300-10000_pass1_cl_src2.gif
[Fri Jun  1 21:52:51 2012] Mean detx,y = (11857.44, 1692.06) 
[Fri Jun  1 21:52:52 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 21:52:59 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 21:52:59 2012] Setting source spectrum file to fullrun_mos2_xmm0092360301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun  1 21:52:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0092360301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jun  1 22:02:32 2012] Updating aperture counts using extracted products
[Fri Jun  1 22:02:32 2012] Error reading totcts from fullrun_mos2_xmm0092360301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun  1 22:02:34 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 22:02:34 2012] Using photon index=1.80, rate=0.0176, arf fullrun_mos2_xmm0092360301_pi300-10000_pass1_cl_src2.arf
[Fri Jun  1 22:02:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 22:02:34 2012] Updating source flux to 4.6e-13
[Fri Jun  1 22:03:00 2012] Reading fit data from xmm0092360301/analysis//spectral/fullrun_mos2_xmm0092360301_pi300-10000_pass1_cl_src2_pl.csv
[Fri Jun  1 22:03:00 2012] Spectral fit parameter nH value = 4.32237e+12
[Fri Jun  1 22:03:00 2012] Spectral fit parameter PhoIndex value = 1.8675
[Fri Jun  1 22:03:00 2012] Failed to get F(0.3-8.0) from xmm0092360301/analysis//spectral/fullrun_mos2_xmm0092360301_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Jun  1 22:03:00 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 22:03:00 2012] Using Nh = 4.3e+12, photon index=1.87, rate=0.0176, arf fullrun_mos2_xmm0092360301_pi300-10000_pass1_cl_src2.arf
[Fri Jun  1 22:03:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 22:03:00 2012] Updating source flux to 4.4e-13