[Fri Jun  1 20:22:08 2012] Detection parameters:
  Position = (222.9, 290.1) = 6 15 49.91 -33 24 0.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.4 +/- 12.8
  Background counts = 26.6
  Rate = 0.006 +/- 0.001

[Fri Jun  1 20:22:08 2012] Off-axis axis estimate = 5.51'
[Fri Jun  1 20:42:47 2012] Using EEF radius (= 9.18 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 20:42:47 2012] Initial guess for spatial extent in simple fitting = 9.18"
[Fri Jun  1 20:42:47 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.917
[Fri Jun  1 20:42:47 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.18"
[Fri Jun  1 21:00:30 2012] fullrun_mos2_xmm0092360301_pi300-10000_cl_pass0_src5.ximg exists
[Fri Jun  1 21:00:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092360301_pi300-10000_cl_pass0_src5.csv
[Fri Jun  1 21:00:30 2012] fullrun_mos2_xmm0092360301_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Jun  1 21:00:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092360301_pi300-10000_cl_pass0_src5.csv
[Fri Jun  1 21:00:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0092360301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0092360301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 21:00:30 2012] fullrun_mos2_xmm0092360301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Jun  1 21:00:30 2012] fullrun_mos2_xmm0092360301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Jun  1 21:00:30 2012] Fit fullrun_mos2_xmm0092360301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Jun  1 21:00:36 2012] Spatial fit model total counts = 147.993000, observed total counts = 148.000000
[Fri Jun  1 21:00:36 2012] Offset between fit and detection position for source 10 = 0.155003 pixels
[Fri Jun  1 21:00:36 2012] 144.942800 total counts/ 78.228700 bgd. counts: snr = 7.542834
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.155003 pixels
  Position = (223.0, 290.1) = 6 15 49.86 -33 24 1.7
  Extent = 8.4 (5.8-11.0)", rotation angle = 0
  Source counts = 66.7 +/- 12.0
  Background counts = 78.2
  Rate = 0.006 +/- 0.001
[Fri Jun  1 21:00:36 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 21:00:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 21:00:36 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 21:00:36 2012] Source does appear to be extended
[Fri Jun  1 21:00:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 21:22:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 21:22:45 2012] Initial guess for spatial extent in simple fitting = 8.42"
[Fri Jun  1 21:22:45 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.843
[Fri Jun  1 21:22:45 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 8.42"
[Fri Jun  1 21:39:31 2012] fullrun_mos2_xmm0092360301_pi300-10000_cl_pass1_src5.ximg exists
[Fri Jun  1 21:39:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092360301_pi300-10000_cl_pass1_src5.csv
[Fri Jun  1 21:39:31 2012] fullrun_mos2_xmm0092360301_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Jun  1 21:39:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0092360301_pi300-10000_cl_pass1_src5.csv
[Fri Jun  1 21:39:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0092360301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0092360301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 21:39:31 2012] fullrun_mos2_xmm0092360301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Jun  1 21:39:31 2012] fullrun_mos2_xmm0092360301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Jun  1 21:39:31 2012] Fit fullrun_mos2_xmm0092360301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Jun  1 21:39:37 2012] Spatial fit model total counts = 147.999000, observed total counts = 148.000000
[Fri Jun  1 21:39:37 2012] Offset between fit and detection position for source 10 = 0.002874 pixels
[Fri Jun  1 21:39:37 2012] 144.926700 total counts/ 79.810600 bgd. counts: snr = 7.288835
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.002874 pixels
  Position = (223.0, 290.1) = 6 15 49.86 -33 24 1.7
  Extent = 8.2 (5.8-11.1)", rotation angle = 0
  Source counts = 65.1 +/- 12.0
  Background counts = 79.8
  Rate = 0.005 +/- 0.001
[Fri Jun  1 21:39:37 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 21:39:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 21:39:37 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 21:39:37 2012] Source does appear to be extended
[Fri Jun  1 21:39:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 21:52:49 2012] XMMSAS src. selection expression = ellipse(19356.147160, 25193.572200, 490.383614, 490.383614, 0.000000, X, Y)
[Fri Jun  1 21:52:49 2012] Writing source region out to fullrun_mos2_xmm0092360301_pi300-10000_pass1_cl_src10_src.reg
[Fri Jun  1 21:52:49 2012] Extracting stamp from image fullrun_mos2_xmm0092360301_pi300-10000_cl_sm2.00.img.gz, (195, 262) - (251, 318)
[Fri Jun  1 21:52:49 2012] XMMSAS bgd. selection expression = annulus(19356.147160, 25193.572200, 817.306024, 1634.612047, X, Y)
[Fri Jun  1 21:52:49 2012] Writing fullrun_mos2_xmm0092360301_pi300-10000_pass1_cl_src10.gif
[Fri Jun  1 21:54:00 2012] Mean detx,y = (-4840.17, -4316.73) 
[Fri Jun  1 21:54:02 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 21:54:11 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 21:54:11 2012] Setting source spectrum file to fullrun_mos2_xmm0092360301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jun  1 21:54:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0092360301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Jun  1 22:01:08 2012] Not generating rmf since there are only 65 counts
[Fri Jun  1 22:01:08 2012] rmf not generated due to insufficient counts
[Fri Jun  1 22:02:33 2012] Updating aperture counts using extracted products
[Fri Jun  1 22:02:33 2012] Error reading totcts from fullrun_mos2_xmm0092360301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jun  1 22:02:34 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 22:02:34 2012] Using photon index=1.80, rate=0.00539, arf fullrun_mos2_xmm0092360301_pi300-10000_pass1_cl_src10.arf
[Fri Jun  1 22:02:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 22:02:34 2012] Updating source flux to 6.9e-14
[Fri Jun  1 22:02:50 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting