[Fri Jun  1 20:21:48 2012] Detection parameters:
  Position = (295.8, 401.9) = 6 15 24.59 -33 15 55.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.1 +/- 10.3
  Background counts = 20.6
  Rate = 0.003 +/- 0.0007

[Fri Jun  1 20:21:48 2012] Off-axis axis estimate = 7.51'
[Fri Jun  1 20:31:51 2012] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 20:31:51 2012] Initial guess for spatial extent in simple fitting = 10.18"
[Fri Jun  1 20:31:51 2012] source mask rpix=2.3, npix_max = 32, mask sum = 33, frac = 1.022
[Fri Jun  1 20:31:51 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.18"
[Fri Jun  1 20:42:47 2012] fullrun_mos1_xmm0092360301_pi300-10000_cl_pass0_src7.ximg exists
[Fri Jun  1 20:42:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092360301_pi300-10000_cl_pass0_src7.csv
[Fri Jun  1 20:42:47 2012] fullrun_mos1_xmm0092360301_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Jun  1 20:42:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092360301_pi300-10000_cl_pass0_src7.csv
[Fri Jun  1 20:42:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092360301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092360301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 20:42:47 2012] fullrun_mos1_xmm0092360301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Jun  1 20:42:47 2012] fullrun_mos1_xmm0092360301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Jun  1 20:42:47 2012] Fit fullrun_mos1_xmm0092360301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Jun  1 21:00:34 2012] Spatial fit model total counts = 102.670000, observed total counts = 95.000000
[Fri Jun  1 21:00:34 2012] Offset between fit and detection position for source 4 = 0.597875 pixels
[Fri Jun  1 21:00:34 2012] 102.549300 total counts/ 83.373600 bgd. counts: snr = 2.100085
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.597875 pixels
  Position = (295.2, 401.8) = 6 15 24.80 -33 15 56.0
  Extent = 4.0 (2.9-6.7)", rotation angle = 0
  Source counts = 19.2 +/- 10.1
  Background counts = 83.4
  Rate = 0.002 +/- 0.0008
[Fri Jun  1 21:00:34 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 21:00:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 21:00:34 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 21:00:34 2012] Source does appear to be extended
[Fri Jun  1 21:00:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 21:10:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 21:10:28 2012] Initial guess for spatial extent in simple fitting = 4.03"
[Fri Jun  1 21:10:28 2012] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.107
[Fri Jun  1 21:10:28 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 4.03"
[Fri Jun  1 21:22:45 2012] fullrun_mos1_xmm0092360301_pi300-10000_cl_pass1_src7.ximg exists
[Fri Jun  1 21:22:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092360301_pi300-10000_cl_pass1_src7.csv
[Fri Jun  1 21:22:45 2012] fullrun_mos1_xmm0092360301_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Jun  1 21:22:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092360301_pi300-10000_cl_pass1_src7.csv
[Fri Jun  1 21:22:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092360301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092360301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 21:22:45 2012] fullrun_mos1_xmm0092360301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Jun  1 21:22:45 2012] fullrun_mos1_xmm0092360301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Jun  1 21:22:45 2012] Fit fullrun_mos1_xmm0092360301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Jun  1 21:39:35 2012] Spatial fit model total counts = 94.683000, observed total counts = 88.000000
[Fri Jun  1 21:39:35 2012] Offset between fit and detection position for source 4 = 0.013741 pixels
[Fri Jun  1 21:39:35 2012] 94.362600 total counts/ 74.554000 bgd. counts: snr = 2.294131
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.013741 pixels
  Position = (295.2, 401.8) = 6 15 24.80 -33 15 56.0
  Extent = 4.1 (3.0-7.0)", rotation angle = 0
  Source counts = 19.8 +/- 9.7
  Background counts = 74.6
  Rate = 0.002 +/- 0.0008
[Fri Jun  1 21:39:35 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 21:39:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 21:39:35 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 21:39:35 2012] Source does appear to be extended
[Fri Jun  1 21:39:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 21:46:42 2012] XMMSAS src. selection expression = ellipse(25633.043740, 34911.738400, 245.382007, 245.382007, 0.000000, X, Y)
[Fri Jun  1 21:46:42 2012] Writing source region out to fullrun_mos1_xmm0092360301_pi300-10000_pass1_cl_src4_src.reg
[Fri Jun  1 21:46:42 2012] Extracting stamp from image fullrun_mos1_xmm0092360301_pi300-10000_cl_sm2.00.img.gz, (281, 388) - (309, 416)
[Fri Jun  1 21:46:42 2012] XMMSAS bgd. selection expression = annulus(25633.043740, 34911.738400, 408.970012, 817.940024, X, Y)
[Fri Jun  1 21:46:42 2012] Writing fullrun_mos1_xmm0092360301_pi300-10000_pass1_cl_src4.gif
[Fri Jun  1 21:47:53 2012] Mean detx,y = (-9287.62, -5713.08) 
[Fri Jun  1 21:47:54 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 21:48:03 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 21:48:03 2012] Setting source spectrum file to fullrun_mos1_xmm0092360301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun  1 21:48:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0092360301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jun  1 21:52:35 2012] Not generating rmf since there are only 19 counts
[Fri Jun  1 21:52:35 2012] rmf not generated due to insufficient counts
[Fri Jun  1 22:02:31 2012] Updating aperture counts using extracted products
[Fri Jun  1 22:02:31 2012] Error reading totcts from fullrun_mos1_xmm0092360301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun  1 22:02:32 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 22:02:32 2012] Using photon index=1.80, rate=0.00166, arf fullrun_mos1_xmm0092360301_pi300-10000_pass1_cl_src4.arf
[Fri Jun  1 22:02:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 22:02:32 2012] Updating source flux to 4.6e-14
[Fri Jun  1 22:02:35 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting