[Sat May 26 22:53:13 2012] Detection parameters:
  Position = (262.6, 224.8) = 6 17 58.84 -32 58 47.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.8 +/- 11.6
  Background counts = 7.5
  Rate = 0.01 +/- 0.002

[Sat May 26 22:53:13 2012] Off-axis axis estimate = 5.94'
[Sat May 26 22:54:35 2012] Using EEF radius (= 9.40 ")to estimate initial spatial extent for simple fitting
[Sat May 26 22:54:35 2012] Initial guess for spatial extent in simple fitting = 9.40"
[Sat May 26 22:54:35 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.883
[Sat May 26 22:54:35 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 9.40"
[Sat May 26 23:22:35 2012] fullrun_pn_xmm0092360101_pi300-10000_cl_pass0_src15.ximg exists
[Sat May 26 23:22:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092360101_pi300-10000_cl_pass0_src15.csv
[Sat May 26 23:22:35 2012] fullrun_pn_xmm0092360101_pi300-10000_cl_pass0_src15_1.ximg exists
[Sat May 26 23:22:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092360101_pi300-10000_cl_pass0_src15.csv
[Sat May 26 23:22:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092360101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092360101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 23:22:35 2012] fullrun_pn_xmm0092360101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sat May 26 23:22:35 2012] fullrun_pn_xmm0092360101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sat May 26 23:22:35 2012] Fit fullrun_pn_xmm0092360101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sun May 27 00:21:00 2012] Source 16 is offset by -0.865913 and 8.319878 pixels which is larger than
2 X fitted extent = 1.068851 x 1.068851, not incorporating fit results
[Sun May 27 00:21:00 2012] Spatial fit model total counts = 143.613000, observed total counts = 145.000000
[Sun May 27 00:21:00 2012] Offset between fit and detection position for source 16 = 0.317434 pixels
[Sun May 27 00:21:00 2012] 140.991500 total counts/ 87.019400 bgd. counts: snr = 5.785771
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.317434 pixels
  Position = (262.4, 224.6) = 6 17 58.92 -32 58 48.9
  Extent = 6.0 (4.8-8.1)", rotation angle = 0
  Source counts = 54.0 +/- 11.9
  Background counts = 87.0
  Rate = 0.007 +/- 0.002
[Sun May 27 00:21:00 2012] Vigneting correction estimate = 1.000000
[Sun May 27 00:21:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 00:21:00 2012] Assessing source extent using major axis lower bound
[Sun May 27 00:21:00 2012] Source does appear to be extended
[Sun May 27 00:21:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 00:21:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 00:21:15 2012] Initial guess for spatial extent in simple fitting = 6.00"
[Sun May 27 00:21:15 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.849
[Sun May 27 00:21:15 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 6.00"
[Sun May 27 00:46:06 2012] fullrun_pn_xmm0092360101_pi300-10000_cl_pass1_src15.ximg exists
[Sun May 27 00:46:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092360101_pi300-10000_cl_pass1_src15.csv
[Sun May 27 00:46:06 2012] fullrun_pn_xmm0092360101_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun May 27 00:46:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092360101_pi300-10000_cl_pass1_src15.csv
[Sun May 27 00:46:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092360101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092360101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 00:46:06 2012] fullrun_pn_xmm0092360101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun May 27 00:46:06 2012] fullrun_pn_xmm0092360101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun May 27 00:46:06 2012] Fit fullrun_pn_xmm0092360101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun May 27 01:35:07 2012] Warning, spatial fit 15 centroid is now closest to src. 15
[Sun May 27 01:35:07 2012] Vigneting correction estimate = 1.000000
[Sun May 27 01:35:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 01:35:07 2012] Assessing source extent using major axis lower bound
[Sun May 27 01:35:07 2012] Source does appear to be extended
[Sun May 27 01:35:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 01:35:22 2012] XMMSAS src. selection expression = ellipse(22776.087000, 19487.533000, 360.170410, 360.170410, 0.000000, X, Y)
[Sun May 27 01:35:22 2012] Writing source region out to fullrun_pn_xmm0092360101_pi300-10000_pass1_cl_src16_src.reg
[Sun May 27 01:35:22 2012] Extracting stamp from image fullrun_pn_xmm0092360101_pi300-10000_cl_sm2.00.img.gz, (242, 204) - (283, 245)
[Sun May 27 01:35:22 2012] XMMSAS bgd. selection expression = annulus(22776.087000, 19487.533000, 600.284017, 1200.568035, X, Y) && !ellipse(21924.953000, 20009.211000, 569.791216, 569.791216, 0.000000, X, Y) && !ellipse(23621.521606, 19419.647018, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 27 01:35:22 2012] Writing fullrun_pn_xmm0092360101_pi300-10000_pass1_cl_src16.gif
[Sun May 27 01:41:54 2012] Mean detx,y = (4898.04, -2489.70) 
[Sun May 27 01:41:56 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 01:42:08 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 01:42:09 2012] Setting source spectrum file to fullrun_pn_xmm0092360101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun May 27 01:42:09 2012] Setting bgd. spectrum file to fullrun_pn_xmm0092360101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sun May 27 01:46:54 2012] Not generating rmf since there are only 53 counts
[Sun May 27 01:46:54 2012] rmf not generated due to insufficient counts
[Sun May 27 01:59:15 2012] Updating aperture counts using extracted products
[Sun May 27 01:59:15 2012] Error reading totcts from fullrun_pn_xmm0092360101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun May 27 01:59:16 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 01:59:16 2012] Using photon index=1.80, rate=0.00729, arf fullrun_pn_xmm0092360101_pi300-10000_pass1_cl_src16.arf
[Sun May 27 01:59:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 01:59:16 2012] Updating source flux to 2.5e-14
[Sun May 27 01:59:20 2012] Flag b found in src. 16 procflags, skipping spectral fitting
[Sun May 27 01:59:20 2012] Source 16 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 27 01:59:21 2012] xmm0092360101/analysis//spectral/fullrun_pn_xmm0092360101_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete