[Sat May 26 22:53:13 2012] Detection parameters:
  Position = (203.1, 168.8) = 6 18 19.44 -33 2 51.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.6 +/- 10.7
  Background counts = 5.7
  Rate = 0.01 +/- 0.001

[Sat May 26 22:53:13 2012] Off-axis axis estimate = 11.67'
[Sat May 26 22:54:35 2012] Using EEF radius (= 12.26 ")to estimate initial spatial extent for simple fitting
[Sat May 26 22:54:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 26 22:54:35 2012] Initial guess for spatial extent in simple fitting = 12.26"
[Sat May 26 22:54:35 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.953
[Sat May 26 22:54:35 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 12.26"
[Sat May 26 23:22:35 2012] fullrun_pn_xmm0092360101_pi300-10000_cl_pass0_src11.ximg exists
[Sat May 26 23:22:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092360101_pi300-10000_cl_pass0_src11.csv
[Sat May 26 23:22:35 2012] fullrun_pn_xmm0092360101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat May 26 23:22:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092360101_pi300-10000_cl_pass0_src11.csv
[Sat May 26 23:22:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092360101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092360101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 23:22:35 2012] fullrun_pn_xmm0092360101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat May 26 23:22:35 2012] fullrun_pn_xmm0092360101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat May 26 23:22:35 2012] Fit fullrun_pn_xmm0092360101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun May 27 00:21:00 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 11.347150 pixels away
[Sun May 27 00:21:00 2012] Vigneting correction estimate = 1.000000
[Sun May 27 00:21:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 00:21:00 2012] Assessing source extent using major
[Sun May 27 00:21:00 2012] Source does appear to be extended
[Sun May 27 00:21:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 00:21:15 2012] Using EEF radius (= 12.26 ")to estimate initial spatial extent for simple fitting
[Sun May 27 00:21:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 27 00:21:15 2012] Initial guess for spatial extent in simple fitting = 12.26"
[Sun May 27 00:21:15 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.953
[Sun May 27 00:21:15 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 12.26"
[Sun May 27 00:46:06 2012] fullrun_pn_xmm0092360101_pi300-10000_cl_pass1_src11.ximg exists
[Sun May 27 00:46:06 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0092360101_pi300-10000_cl_pass1_src11.csv
[Sun May 27 00:46:06 2012] fullrun_pn_xmm0092360101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun May 27 00:46:06 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0092360101_pi300-10000_cl_pass1_src11.csv
[Sun May 27 00:46:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092360101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092360101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 00:46:06 2012] fullrun_pn_xmm0092360101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun May 27 00:46:06 2012] fullrun_pn_xmm0092360101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun May 27 00:46:06 2012] Fit fullrun_pn_xmm0092360101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sun May 27 01:35:07 2012] Spatial fit model total counts = 125.059000, observed total counts = 125.000000
[Sun May 27 01:35:07 2012] Offset between fit and detection position for source 12 = 0.056394 pixels
[Sun May 27 01:35:07 2012] 124.898400 total counts/ 75.719000 bgd. counts: snr = 5.651722
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.056394 pixels
  Position = (203.1, 168.8) = 6 18 19.42 -33 2 51.3
  Extent = 5.3 (4.1-7.7)", rotation angle = 0
  Source counts = 49.2 +/- 11.2
  Background counts = 75.7
  Rate = 0.007 +/- 0.002
[Sun May 27 01:35:07 2012] Vigneting correction estimate = 1.000000
[Sun May 27 01:35:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 01:35:07 2012] Assessing source extent using major axis lower bound
[Sun May 27 01:35:07 2012] Source does appear to be extended
[Sun May 27 01:35:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 01:35:22 2012] XMMSAS src. selection expression = ellipse(17623.547400, 14634.843600, 319.640409, 319.640409, 0.000000, X, Y)
[Sun May 27 01:35:22 2012] Writing source region out to fullrun_pn_xmm0092360101_pi300-10000_pass1_cl_src12_src.reg
[Sun May 27 01:35:22 2012] Extracting stamp from image fullrun_pn_xmm0092360101_pi300-10000_cl_sm2.00.img.gz, (185, 150) - (221, 187)
[Sun May 27 01:35:22 2012] XMMSAS bgd. selection expression = annulus(17623.547400, 14634.843600, 532.734015, 1065.468031, X, Y)
[Sun May 27 01:35:22 2012] Writing fullrun_pn_xmm0092360101_pi300-10000_pass1_cl_src12.gif
[Sun May 27 01:40:16 2012] Mean detx,y = (11800.30, -4043.32) 
[Sun May 27 01:40:18 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 01:40:30 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 01:40:30 2012] Setting source spectrum file to fullrun_pn_xmm0092360101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun May 27 01:40:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0092360101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sun May 27 01:46:27 2012] Not generating rmf since there are only 49 counts
[Sun May 27 01:46:27 2012] rmf not generated due to insufficient counts
[Sun May 27 01:59:15 2012] Updating aperture counts using extracted products
[Sun May 27 01:59:15 2012] Error reading totcts from fullrun_pn_xmm0092360101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun May 27 01:59:16 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 01:59:16 2012] Using photon index=1.80, rate=0.00665, arf fullrun_pn_xmm0092360101_pi300-10000_pass1_cl_src12.arf
[Sun May 27 01:59:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 01:59:16 2012] Updating source flux to 4.2e-14
[Sun May 27 01:59:20 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 27 01:59:21 2012] xmm0092360101/analysis//spectral/fullrun_pn_xmm0092360101_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete