[Sat May 26 22:53:35 2012] Detection parameters:
  Position = (343.9, 276.9) = 6 17 30.73 -32 55 1.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.5 +/- 9.4
  Background counts = 2.7
  Rate = 0.006 +/- 0.001

[Sat May 26 22:53:35 2012] Off-axis axis estimate = 3.65'
[Sat May 26 23:22:35 2012] Using EEF radius (= 8.25 ")to estimate initial spatial extent for simple fitting
[Sat May 26 23:22:35 2012] Initial guess for spatial extent in simple fitting = 8.25"
[Sat May 26 23:22:35 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.696
[Sat May 26 23:22:35 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.25"
[Sat May 26 23:52:23 2012] fullrun_mos1_xmm0092360101_pi300-10000_cl_pass0_src3.ximg exists
[Sat May 26 23:52:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092360101_pi300-10000_cl_pass0_src3.csv
[Sat May 26 23:52:23 2012] fullrun_mos1_xmm0092360101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat May 26 23:52:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092360101_pi300-10000_cl_pass0_src3.csv
[Sat May 26 23:52:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092360101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092360101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 23:52:23 2012] fullrun_mos1_xmm0092360101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat May 26 23:52:23 2012] fullrun_mos1_xmm0092360101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat May 26 23:52:23 2012] Fit fullrun_mos1_xmm0092360101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun May 27 00:21:04 2012] Spatial fit model total counts = 69.246900, observed total counts = 70.000000
[Sun May 27 00:21:04 2012] Offset between fit and detection position for source 7 = 0.241389 pixels
[Sun May 27 00:21:04 2012] 69.082500 total counts/ 30.164500 bgd. counts: snr = 7.086021
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.241389 pixels
  Position = (343.7, 276.8) = 6 17 30.81 -32 55 1.5
  Extent = 4.0 (3.2-5.2)", rotation angle = 0
  Source counts = 38.9 +/- 8.3
  Background counts = 30.2
  Rate = 0.003 +/- 0.0007
[Sun May 27 00:21:04 2012] Vigneting correction estimate = 1.000000
[Sun May 27 00:21:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 00:21:04 2012] Assessing source extent using major axis lower bound
[Sun May 27 00:21:04 2012] Source does appear to be extended
[Sun May 27 00:21:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 00:46:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 00:46:06 2012] Initial guess for spatial extent in simple fitting = 4.02"
[Sun May 27 00:46:06 2012] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.109
[Sun May 27 00:46:06 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.02"
[Sun May 27 01:11:15 2012] fullrun_mos1_xmm0092360101_pi300-10000_cl_pass1_src3.ximg exists
[Sun May 27 01:11:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092360101_pi300-10000_cl_pass1_src3.csv
[Sun May 27 01:11:15 2012] fullrun_mos1_xmm0092360101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun May 27 01:11:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092360101_pi300-10000_cl_pass1_src3.csv
[Sun May 27 01:11:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092360101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092360101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 01:11:15 2012] fullrun_mos1_xmm0092360101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun May 27 01:11:15 2012] fullrun_mos1_xmm0092360101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun May 27 01:11:15 2012] Fit fullrun_mos1_xmm0092360101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun May 27 01:35:10 2012] Spatial fit model total counts = 68.348400, observed total counts = 69.000000
[Sun May 27 01:35:10 2012] Offset between fit and detection position for source 7 = 0.008701 pixels
[Sun May 27 01:35:10 2012] 68.741200 total counts/ 30.064900 bgd. counts: snr = 7.053668
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.008701 pixels
  Position = (343.7, 276.8) = 6 17 30.81 -32 55 1.5
  Extent = 3.9 (3.2-5.2)", rotation angle = 0
  Source counts = 38.7 +/- 8.3
  Background counts = 30.1
  Rate = 0.003 +/- 0.0007
[Sun May 27 01:35:10 2012] Vigneting correction estimate = 1.000000
[Sun May 27 01:35:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 01:35:10 2012] Assessing source extent using major axis lower bound
[Sun May 27 01:35:10 2012] Source does appear to be extended
[Sun May 27 01:35:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 01:47:54 2012] XMMSAS src. selection expression = ellipse(29855.226000, 24034.891400, 235.732807, 235.732807, 0.000000, X, Y)
[Sun May 27 01:47:54 2012] Writing source region out to fullrun_mos1_xmm0092360101_pi300-10000_pass1_cl_src7_src.reg
[Sun May 27 01:47:54 2012] Extracting stamp from image fullrun_mos1_xmm0092360101_pi300-10000_cl_sm2.00.img.gz, (330, 263) - (357, 290)
[Sun May 27 01:47:54 2012] XMMSAS bgd. selection expression = annulus(29855.226000, 24034.891400, 392.888011, 785.776023, X, Y)
[Sun May 27 01:47:54 2012] Writing fullrun_mos1_xmm0092360101_pi300-10000_pass1_cl_src7.gif
[Sun May 27 01:48:13 2012] Mean detx,y = (2208.07, -3838.02) 
[Sun May 27 01:48:14 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 01:48:21 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 01:48:21 2012] Setting source spectrum file to fullrun_mos1_xmm0092360101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun May 27 01:48:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0092360101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun May 27 01:52:27 2012] Not generating rmf since there are only 38 counts
[Sun May 27 01:52:27 2012] rmf not generated due to insufficient counts
[Sun May 27 01:59:16 2012] Updating aperture counts using extracted products
[Sun May 27 01:59:16 2012] Error reading totcts from fullrun_mos1_xmm0092360101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun May 27 01:59:16 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 01:59:16 2012] Using photon index=1.80, rate=0.00329, arf fullrun_mos1_xmm0092360101_pi300-10000_pass1_cl_src7.arf
[Sun May 27 01:59:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 01:59:16 2012] Updating source flux to 5.7e-14
[Sun May 27 01:59:18 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 27 01:59:19 2012] xmm0092360101/analysis//spectral/fullrun_mos1_xmm0092360101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete