[Sat May 26 22:53:35 2012] Detection parameters:
  Position = (252.7, 161.2) = 6 18 2.28 -33 3 24.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.5 +/- 7.2
  Background counts = 3.1
  Rate = 0.004 +/- 0.001

[Sat May 26 22:53:35 2012] Off-axis axis estimate = 10.48'
[Sat May 26 23:22:35 2012] Using EEF radius (= 11.67 ")to estimate initial spatial extent for simple fitting
[Sat May 26 23:22:35 2012] Initial guess for spatial extent in simple fitting = 11.67"
[Sat May 26 23:22:35 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.888
[Sat May 26 23:22:35 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 11.67"
[Sat May 26 23:52:23 2012] fullrun_mos1_xmm0092360101_pi300-10000_cl_pass0_src9.ximg exists
[Sat May 26 23:52:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092360101_pi300-10000_cl_pass0_src9.csv
[Sat May 26 23:52:23 2012] fullrun_mos1_xmm0092360101_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat May 26 23:52:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092360101_pi300-10000_cl_pass0_src9.csv
[Sat May 26 23:52:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092360101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092360101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 23:52:23 2012] fullrun_mos1_xmm0092360101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat May 26 23:52:23 2012] fullrun_mos1_xmm0092360101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat May 26 23:52:23 2012] Fit fullrun_mos1_xmm0092360101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun May 27 00:21:04 2012] Spatial fit model total counts = 51.434000, observed total counts = 52.000000
[Sun May 27 00:21:04 2012] Offset between fit and detection position for source 21 = 0.116601 pixels
[Sun May 27 00:21:04 2012] 51.843400 total counts/ 30.634400 bgd. counts: snr = 3.831912
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.116601 pixels
  Position = (252.6, 161.2) = 6 18 2.31 -33 3 24.5
  Extent = 4.3 (3.1-6.1)", rotation angle = 0
  Source counts = 21.2 +/- 7.2
  Background counts = 30.6
  Rate = 0.002 +/- 0.0006
[Sun May 27 00:21:04 2012] Vigneting correction estimate = 1.000000
[Sun May 27 00:21:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 00:21:04 2012] Assessing source extent using major axis lower bound
[Sun May 27 00:21:04 2012] Source does appear to be extended
[Sun May 27 00:21:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 00:46:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 00:46:06 2012] Initial guess for spatial extent in simple fitting = 4.35"
[Sun May 27 00:46:06 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.001
[Sun May 27 00:46:06 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 4.35"
[Sun May 27 01:11:15 2012] fullrun_mos1_xmm0092360101_pi300-10000_cl_pass1_src9.ximg exists
[Sun May 27 01:11:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092360101_pi300-10000_cl_pass1_src9.csv
[Sun May 27 01:11:15 2012] fullrun_mos1_xmm0092360101_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun May 27 01:11:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092360101_pi300-10000_cl_pass1_src9.csv
[Sun May 27 01:11:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092360101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092360101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 01:11:15 2012] fullrun_mos1_xmm0092360101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun May 27 01:11:15 2012] fullrun_mos1_xmm0092360101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun May 27 01:11:15 2012] Fit fullrun_mos1_xmm0092360101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sun May 27 01:35:10 2012] Spatial fit model total counts = 51.430100, observed total counts = 52.000000
[Sun May 27 01:35:10 2012] Offset between fit and detection position for source 21 = 0.007368 pixels
[Sun May 27 01:35:10 2012] 51.837300 total counts/ 30.525800 bgd. counts: snr = 3.857274
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.007368 pixels
  Position = (252.6, 161.2) = 6 18 2.31 -33 3 24.5
  Extent = 4.4 (3.1-6.3)", rotation angle = 0
  Source counts = 21.3 +/- 7.2
  Background counts = 30.5
  Rate = 0.002 +/- 0.0006
[Sun May 27 01:35:10 2012] Vigneting correction estimate = 1.000000
[Sun May 27 01:35:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 01:35:10 2012] Assessing source extent using major axis lower bound
[Sun May 27 01:35:10 2012] Source does appear to be extended
[Sun May 27 01:35:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 01:47:54 2012] XMMSAS src. selection expression = ellipse(21926.467800, 13974.150000, 264.783008, 264.783008, 0.000000, X, Y)
[Sun May 27 01:47:54 2012] Writing source region out to fullrun_mos1_xmm0092360101_pi300-10000_pass1_cl_src21_src.reg
[Sun May 27 01:47:54 2012] Extracting stamp from image fullrun_mos1_xmm0092360101_pi300-10000_cl_sm2.00.img.gz, (237, 146) - (268, 176)
[Sun May 27 01:47:54 2012] XMMSAS bgd. selection expression = annulus(21926.467800, 13974.150000, 441.305013, 882.610025, X, Y)
[Sun May 27 01:47:54 2012] Writing fullrun_mos1_xmm0092360101_pi300-10000_pass1_cl_src21.gif
[Sun May 27 01:49:11 2012] Mean detx,y = (6915.12, 8086.58) 
[Sun May 27 01:49:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 01:49:20 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 01:49:20 2012] Setting source spectrum file to fullrun_mos1_xmm0092360101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sun May 27 01:49:20 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0092360101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sun May 27 01:52:48 2012] Not generating rmf since there are only 21 counts
[Sun May 27 01:52:48 2012] rmf not generated due to insufficient counts
[Sun May 27 01:59:16 2012] Updating aperture counts using extracted products
[Sun May 27 01:59:16 2012] Error reading totcts from fullrun_mos1_xmm0092360101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sun May 27 01:59:16 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 01:59:16 2012] Using photon index=1.80, rate=0.00181, arf fullrun_mos1_xmm0092360101_pi300-10000_pass1_cl_src21.arf
[Sun May 27 01:59:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 01:59:16 2012] Updating source flux to 4e-14
[Sun May 27 01:59:18 2012] Source 21 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 27 01:59:19 2012] xmm0092360101/analysis//spectral/fullrun_mos1_xmm0092360101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete