[Tue Aug  7 01:19:45 2012] Detection parameters:
  Position = (215.8, 150.0) = 13 47 36.26 -60 37 4.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32289.2 +/- 213.4
  Background counts = 49.3
  Rate = 1 +/- 0.007

[Tue Aug  7 01:19:46 2012] Off-axis axis estimate = 12.32'
[Tue Aug  7 01:22:26 2012] Using EEF radius (= 12.59 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 01:22:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug  7 01:22:26 2012] Initial guess for spatial extent in simple fitting = 12.59"
[Tue Aug  7 01:22:26 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.912
[Tue Aug  7 01:22:26 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.59"
[Tue Aug  7 02:48:44 2012] fullrun_pn_xmm0092140101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug  7 02:48:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092140101_pi300-10000_cl_pass0_src1.csv
[Tue Aug  7 02:48:44 2012] fullrun_pn_xmm0092140101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug  7 02:48:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092140101_pi300-10000_cl_pass0_src1.csv
[Tue Aug  7 02:48:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092140101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092140101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 02:48:45 2012] fullrun_pn_xmm0092140101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug  7 02:48:45 2012] fullrun_pn_xmm0092140101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug  7 02:48:45 2012] Fit fullrun_pn_xmm0092140101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug  7 03:32:48 2012] Spatial fit model total counts = 30909.900000, observed total counts = 30981.000000
[Tue Aug  7 03:32:48 2012] Offset between fit and detection position for source 1 = 0.233423 pixels
[Tue Aug  7 03:32:48 2012] 31040.650000 total counts/ 4581.650000 bgd. counts: snr = 390.897121
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.233423 pixels
  Position = (216.0, 150.1) = 13 47 36.14 -60 37 3.5
  Extent = 11.1 (11.1-11.1)", rotation angle = 0
  Source counts = 26459.0 +/- 176.2
  Background counts = 4581.6
  Rate = 0.9 +/- 0.006
[Tue Aug  7 03:32:48 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 03:32:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 03:32:48 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 03:32:48 2012] Source does appear to be extended
[Tue Aug  7 03:32:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 03:32:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug  7 03:32:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug  7 03:32:58 2012] Initial guess for spatial extent in simple fitting = 11.11"
[Tue Aug  7 03:32:58 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.965
[Tue Aug  7 03:32:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.11"
[Tue Aug  7 05:59:13 2012] fullrun_pn_xmm0092140101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug  7 05:59:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092140101_pi300-10000_cl_pass1_src1.csv
[Tue Aug  7 05:59:13 2012] fullrun_pn_xmm0092140101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug  7 05:59:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0092140101_pi300-10000_cl_pass1_src1.csv
[Tue Aug  7 05:59:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0092140101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0092140101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 05:59:13 2012] fullrun_pn_xmm0092140101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug  7 05:59:13 2012] fullrun_pn_xmm0092140101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug  7 05:59:13 2012] Fit fullrun_pn_xmm0092140101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug  7 06:26:41 2012] Spatial fit model total counts = 30411.600000, observed total counts = 30450.000000
[Tue Aug  7 06:26:41 2012] Offset between fit and detection position for source 1 = 0.008500 pixels
[Tue Aug  7 06:26:41 2012] 30565.480000 total counts/ 4662.080000 bgd. counts: snr = 379.373430
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.008500 pixels
  Position = (216.0, 150.1) = 13 47 36.14 -60 37 3.5
  Extent = 10.6 (10.6-10.6)", rotation angle = 0
  Source counts = 25903.4 +/- 174.8
  Background counts = 4662.1
  Rate = 0.9 +/- 0.006
[Tue Aug  7 06:26:41 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 06:26:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 06:26:41 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 06:26:41 2012] Source does appear to be extended
[Tue Aug  7 06:26:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 06:26:53 2012] Counts = 25903.400000, rescaling region sizes by 3.000000
[Tue Aug  7 06:26:53 2012] XMMSAS src. selection expression = ellipse(18746.364200, 13010.494600, 1910.952055, 1910.952055, 0.000000, X, Y)
[Tue Aug  7 06:26:53 2012] Writing source region out to fullrun_pn_xmm0092140101_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug  7 06:26:53 2012] Extracting stamp from image fullrun_pn_xmm0092140101_pi300-10000_cl_sm2.00.img.gz, (106, 40) - (326, 260)
[Tue Aug  7 06:26:53 2012] XMMSAS bgd. selection expression = annulus(18746.364200, 13010.494600, 9554.760275, 19109.520550, X, Y) && !ellipse(25671.069000, 28115.423000, 1389.052840, 1389.052840, 0.000000, X, Y) && !ellipse(24749.744446, 29597.623505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(6979.751240, 27515.171640, 592.350417, 592.350417, 0.000000, X, Y) && !ellipse(7107.774000, 25786.628400, 589.884817, 589.884817, 0.000000, X, Y) && !ellipse(25125.979400, 21322.737000, 424.481612, 424.481612, 0.000000, X, Y) && !ellipse(12143.110480, 20396.905400, 425.508812, 425.508812, 0.000000, X, Y) && !ellipse(27220.036804, 20149.530502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18965.641400, 18510.801400, 431.266412, 431.266412, 0.000000, X, Y) && !ellipse(32319.089600, 32447.853210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20339.067734, 32615.980286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18502.926468, 31846.759888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30716.925800, 30648.460400, 594.067217, 594.067217, 0.000000, X, Y) && !ellipse(26846.301605, 29498.707733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20215.461517, 11197.987717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17171.495651, 28361.707367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33585.820007, 27254.838928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28027.640000, 26314.110600, 1156.048033, 1156.048033, 0.000000, X, Y) && !ellipse(26935.956635, 26499.953033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16940.436417, 24560.847076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30257.955600, 22687.137800, 804.254022, 804.254022, 0.000000, X, Y) && !ellipse(26878.475250, 22282.914246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19936.852036, 21898.869568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24044.762000, 20291.014000, 1383.864040, 1383.864040, 0.000000, X, Y) && !ellipse(25647.208200, 19583.112200, 477.155214, 477.155214, 0.000000, X, Y) && !ellipse(27911.517944, 19422.306030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14068.908608, 19329.000540, 2654.218339, 1566.569033, 89.419719, X, Y) && !ellipse(14567.432000, 18451.038000, 3855.992111, 3855.992111, 0.000000, X, Y) && !ellipse(15642.658000, 17110.420000, 1906.968055, 1906.968055, 0.000000, X, Y) && !ellipse(20128.838933, 16849.941923, 549.779319, 433.768572, 284.700944, X, Y) && !ellipse(27371.355260, 16595.016800, 423.935081, 423.935081, 0.000000, X, Y) && !ellipse(16308.796000, 16157.164000, 1948.288056, 1948.288056, 0.000000, X, Y) && !ellipse(16620.228000, 15777.324000, 1959.152056, 1959.152056, 0.000000, X, Y) && !ellipse(17017.794000, 15130.098000, 1948.304056, 1948.304056, 0.000000, X, Y) && !ellipse(17318.788000, 14535.046000, 1960.560056, 1960.560056, 0.000000, X, Y) && !ellipse(21099.861069, 12195.255219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20944.104000, 10347.824000, 1311.096038, 1311.096038, 0.000000, X, Y)
[Tue Aug  7 06:26:53 2012] Writing fullrun_pn_xmm0092140101_pi300-10000_pass1_cl_src1.gif
[Tue Aug  7 06:27:15 2012] Mean detx,y = (-14674.50, 7164.19) 
[Tue Aug  7 06:27:20 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug  7 06:32:24 2012] Binned source spectrum to 10 counts/bin
[Tue Aug  7 06:32:24 2012] Setting source spectrum file to fullrun_pn_xmm0092140101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug  7 06:32:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0092140101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug  7 09:16:27 2012] Updating aperture counts using extracted products
[Tue Aug  7 09:16:27 2012] Error reading totcts from fullrun_pn_xmm0092140101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug  7 09:16:28 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug  7 09:16:28 2012] Using photon index=1.80, rate=0.928, arf fullrun_pn_xmm0092140101_pi300-10000_pass1_cl_src1.arf
[Tue Aug  7 09:16:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug  7 09:16:28 2012] Updating source flux to 6.4e-12
[Tue Aug  7 09:21:06 2012] Reading fit data from xmm0092140101/analysis//spectral/fullrun_pn_xmm0092140101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Aug  7 09:21:06 2012] Spectral fit parameter nH value = 2.1268e+22
[Tue Aug  7 09:21:06 2012] Spectral fit parameter PhoIndex value = 1.31066
[Tue Aug  7 09:21:06 2012] Failed to get F(0.3-8.0) from xmm0092140101/analysis//spectral/fullrun_pn_xmm0092140101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Aug  7 09:21:06 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug  7 09:21:06 2012] Using Nh = 2.1e+22, photon index=1.31, rate=0.928, arf fullrun_pn_xmm0092140101_pi300-10000_pass1_cl_src1.arf
[Tue Aug  7 09:21:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug  7 09:21:06 2012] Updating source flux to 2.2e-11