[Tue Aug  7 01:20:04 2012] Detection parameters:
  Position = (200.1, 155.1) = 13 47 45.54 -60 36 43.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.7 +/- 15.1
  Background counts = 28.2
  Rate = 0.002 +/- 0.0005

[Tue Aug  7 01:20:04 2012] Off-axis axis estimate = 12.60'
[Tue Aug  7 02:48:45 2012] Using EEF radius (= 12.73 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 02:48:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug  7 02:48:45 2012] Initial guess for spatial extent in simple fitting = 12.73"
[Tue Aug  7 02:48:45 2012] source mask rpix=2.9, npix_max = 46, mask sum = 47, frac = 1.001
[Tue Aug  7 02:48:45 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 12.73"
[Tue Aug  7 03:17:53 2012] fullrun_mos1_xmm0092140101_pi300-10000_cl_pass0_src10.ximg exists
[Tue Aug  7 03:17:53 2012] fullrun_mos1_xmm0092140101_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Aug  7 03:17:53 2012] Fit fullrun_mos1_xmm0092140101_pi300-10000_cl_pass0_src10 appears to have run properly
[Tue Aug  7 03:17:53 2012] fullrun_mos1_xmm0092140101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Aug  7 03:17:53 2012] fullrun_mos1_xmm0092140101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Aug  7 03:17:53 2012] Fit fullrun_mos1_xmm0092140101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Aug  7 03:32:49 2012] Spatial fit model total counts = 360.250000, observed total counts = 348.000000
[Tue Aug  7 03:32:49 2012] Offset between fit and detection position for source 11 = 8.446189 pixels
[Tue Aug  7 03:32:49 2012] 345.055000 total counts/ 106.794000 bgd. counts: snr = 23.055765
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 8.446189 pixels
  Position = (207.4, 150.9) = 13 47 41.23 -60 37 0.1
  Extent = 25.5 (21.0-50.9)" x 14.1 (8.5-19.4)", rotation angle = 42 (18-61) degrees
  Source counts = 238.3 +/- 18.6
  Background counts = 106.8
  Rate = 0.008 +/- 0.0006
[Tue Aug  7 03:32:49 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 03:32:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 03:32:49 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 03:32:49 2012] Source does appear to be extended
[Tue Aug  7 03:32:49 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.08
[Tue Aug  7 03:32:49 2012] Source is confused with source 2
[Tue Aug  7 05:59:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug  7 05:59:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug  7 05:59:14 2012] Initial guess for spatial extent in simple fitting = 19.80"
[Tue Aug  7 05:59:14 2012] source mask rpix=4.6, npix_max = 102, mask sum = 91, frac = 0.892
[Tue Aug  7 05:59:14 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 19.80"
[Tue Aug  7 06:15:50 2012] fullrun_mos1_xmm0092140101_pi300-10000_cl_pass1_src9.ximg exists
[Tue Aug  7 06:15:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092140101_pi300-10000_cl_pass1_src9.csv
[Tue Aug  7 06:15:50 2012] fullrun_mos1_xmm0092140101_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Aug  7 06:15:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092140101_pi300-10000_cl_pass1_src9.csv
[Tue Aug  7 06:15:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092140101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092140101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 06:15:50 2012] fullrun_mos1_xmm0092140101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Aug  7 06:15:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092140101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Tue Aug  7 06:15:50 2012] fullrun_mos1_xmm0092140101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Aug  7 06:15:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0092140101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Tue Aug  7 06:15:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0092140101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0092140101_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 06:26:43 2012] Warning, spatial fit 9 centroid is now closest to src. 12
[Tue Aug  7 06:26:43 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 06:26:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 06:26:43 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 06:26:43 2012] Source does appear to be extended
[Tue Aug  7 06:26:43 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.08
[Tue Aug  7 08:30:27 2012] XMMSAS src. selection expression = ellipse(17996.160000, 13076.434000, 1527.594044, 848.028024, 42.440000, X, Y)
[Tue Aug  7 08:30:27 2012] Writing source region out to fullrun_mos1_xmm0092140101_pi300-10000_pass1_cl_src11_src.reg
[Tue Aug  7 08:30:27 2012] Extracting stamp from image fullrun_mos1_xmm0092140101_pi300-10000_cl_sm2.00.img.gz, (120, 63) - (295, 239)
[Tue Aug  7 08:30:27 2012] XMMSAS bgd. selection expression = annulus(17996.160000, 13076.434000, 2545.990073, 5091.980147, X, Y) && !ellipse(18772.986000, 12997.480600, 2328.520867, 2328.520867, 0.000000, X, Y) && !ellipse(18963.875397, 18488.496384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20625.139175, 12310.865814, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug  7 08:30:27 2012] Writing fullrun_mos1_xmm0092140101_pi300-10000_pass1_cl_src11.gif
[Tue Aug  7 08:36:23 2012] Mean detx,y = (-7048.95, -15001.88) 
[Tue Aug  7 08:36:24 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug  7 08:36:51 2012] Binned source spectrum to 10 counts/bin
[Tue Aug  7 08:36:51 2012] Setting source spectrum file to fullrun_mos1_xmm0092140101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Aug  7 08:36:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0092140101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Aug  7 09:16:29 2012] Updating aperture counts using extracted products
[Tue Aug  7 09:16:29 2012] Error reading totcts from fullrun_mos1_xmm0092140101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Aug  7 09:16:29 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug  7 09:16:29 2012] Using photon index=1.80, rate=0.0078, arf fullrun_mos1_xmm0092140101_pi300-10000_pass1_cl_src11.arf
[Tue Aug  7 09:16:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug  7 09:16:29 2012] Updating source flux to 3.2e-13
[Tue Aug  7 09:16:31 2012] Flag c found in src. 11 procflags, skipping spectral fitting