[Wed May 22 22:34:36 2013] Detection parameters: Position = (342.6, 281.2) = 15 32 18.68 4 38 3.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 213.0 +/- 23.5 Background counts = 119.5 Rate = 0.007 +/- 0.0008 [Wed May 22 22:34:36 2013] Off-axis axis estimate = 3.44' [Wed May 22 22:35:02 2013] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting [Wed May 22 22:35:02 2013] Initial guess for spatial extent in simple fitting = 8.15" [Wed May 22 22:35:02 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.110 [Wed May 22 22:35:02 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 8.15" [Wed May 22 22:35:03 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src42.ximg exists [Wed May 22 22:35:03 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src42_1.ximg exists [Wed May 22 22:35:03 2013] Fit fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src42 appears to have run properly [Wed May 22 22:35:04 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src42.ximg exists [Wed May 22 22:35:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src42.csv [Wed May 22 22:35:04 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists [Wed May 22 22:35:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src42.csv [Wed May 22 22:35:04 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src42_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 22 22:35:19 2013] Spatial fit model total counts = 935.607000, observed total counts = 922.000000 [Wed May 22 22:35:19 2013] Offset between fit and detection position for source 44 = 0.068191 pixels [Wed May 22 22:35:19 2013] 929.289000 total counts/ 827.473000 bgd. counts: snr = 3.539477 Spatial fit parameters: Offset between fit and detection position for source 44 = 0.068191 pixels Position = (342.7, 281.2) = 15 32 18.67 4 38 3.3 Extent = 5.2 (3.1-7.2)" x 4.2 (2.8-6.3)", rotation angle = 90 (90-90) degrees Source counts = 101.8 +/- 30.5 Background counts = 827.5 Rate = 0.004 +/- 0.001 [Wed May 22 22:35:19 2013] Vigneting correction estimate = 1.000000 [Wed May 22 22:35:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 22 22:35:19 2013] Assessing source extent using major axis lower bound [Wed May 22 22:35:19 2013] Source does appear to be extended [Wed May 22 22:35:19 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.49 [Wed May 22 22:35:41 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Wed May 22 22:35:41 2013] Initial guess for spatial extent in simple fitting = 4.71" [Wed May 22 22:35:41 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.899 [Wed May 22 22:35:41 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 4.71" [Wed May 22 22:35:42 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src35.ximg exists [Wed May 22 22:35:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src35.csv [Wed May 22 22:35:42 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src35_1.ximg exists [Wed May 22 22:35:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src35.csv [Wed May 22 22:35:42 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src35_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 22 22:35:43 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src35.ximg exists [Wed May 22 22:35:43 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists [Wed May 22 22:35:43 2013] Fit fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly [Wed May 22 22:35:54 2013] Spatial fit model total counts = 958.059000, observed total counts = 958.000000 [Wed May 22 22:35:54 2013] Offset between fit and detection position for source 44 = 0.072974 pixels [Wed May 22 22:35:54 2013] 958.087300 total counts/ 864.028000 bgd. counts: snr = 3.199911 Spatial fit parameters: Offset between fit and detection position for source 44 = 0.072974 pixels Position = (342.7, 281.1) = 15 32 18.67 4 38 3.0 Extent = 4.3 (3.3-6.1)", rotation angle = 0 Source counts = 94.1 +/- 31.0 Background counts = 864.0 Rate = 0.003 +/- 0.001 [Wed May 22 22:35:54 2013] Vigneting correction estimate = 1.000000 [Wed May 22 22:35:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 22 22:35:54 2013] Assessing source extent using major axis lower bound [Wed May 22 22:35:54 2013] Source does appear to be extended [Wed May 22 22:35:54 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 22 22:36:15 2013] XMMSAS src. selection expression = ellipse(29764.411600, 24408.164800, 260.076607, 260.076607, 0.000000, X, Y) [Wed May 22 22:36:15 2013] Not overwriting source region fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src44_src.reg [Wed May 22 22:36:15 2013] Extracting stamp from image fullrun_pn_xmm0091140401_pi300-10000_cl_sm2.00.img.gz, (328, 266) - (358, 296) [Wed May 22 22:36:15 2013] XMMSAS bgd. selection expression = annulus(29764.411600, 24408.164800, 433.461012, 866.922025, X, Y) && !ellipse(27542.192000, 26222.144000, 2160.256062, 2160.256062, 0.000000, X, Y) [Wed May 22 22:36:15 2013] Writing fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src44.gif [Wed May 22 22:38:21 2013] Mean detx,y = (2322.74, 3848.10) [Wed May 22 22:38:23 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 22 22:38:35 2013] Binned source spectrum to 10 counts/bin [Wed May 22 22:38:35 2013] Setting source spectrum file to fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src44_src_b10.pi.gz [Wed May 22 22:38:35 2013] Setting bgd. spectrum file to fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src44_bgd.pi.gz [Wed May 22 22:43:26 2013] Not generating rmf since there are only 94 counts [Wed May 22 22:43:26 2013] rmf not generated due to insufficient counts [Wed May 22 22:46:07 2013] Updating aperture counts using extracted products [Wed May 22 22:46:07 2013] Total counts from fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src44_src_b10.pi.gz = 196.00 [Wed May 22 22:46:07 2013] Total counts from fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src44_bgd.pi.gz = 667.00 [Wed May 22 22:46:07 2013] Got source and background scale factors 214400.000000, 1592755.000000 [Wed May 22 22:46:07 2013] User source parameters: Position = (342.7, 281.1) = 15 32 18.67 4 38 3.0 Extent = 4.3 (3.3-6.1)", rotation angle = 0 Source aperture counts = 106.2 +/- 15.0 Background aperture counts = 89.8 Rate = 0.004 +/- 0.0005 [Wed May 22 22:46:08 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 22 22:46:08 2013] Using photon index=1.80, rate=0.00339, arf fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src44.arf [Wed May 22 22:46:08 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 22 22:46:08 2013] Updating source flux to 1.4e-14 [Wed May 22 22:46:22 2013] Source 44 has fewer than 100.000000 counts, skipping spectral fitting [Wed May 22 22:46:23 2013] xmm0091140401/analysis//spectral/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src44_pl.csv not found, spectral fit skipped or did not complete