[Wed May 22 22:34:35 2013] Detection parameters:
  Position = (294.3, 288.3) = 15 32 32.74 4 38 33.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.0 +/- 19.6
  Background counts = 130.5
  Rate = 0.003 +/- 0.0007

[Wed May 22 22:34:36 2013] Off-axis axis estimate = 0.79'
[Wed May 22 22:35:02 2013] Using EEF radius (= 6.83 ")to estimate initial spatial extent for simple fitting
[Wed May 22 22:35:02 2013] Initial guess for spatial extent in simple fitting = 6.83"
[Wed May 22 22:35:02 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.934
[Wed May 22 22:35:02 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 6.83"
[Wed May 22 22:35:03 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src38.ximg exists
[Wed May 22 22:35:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src38.csv
[Wed May 22 22:35:03 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src38_1.ximg exists
[Wed May 22 22:35:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src38.csv
[Wed May 22 22:35:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:04 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Wed May 22 22:35:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src38.csv
[Wed May 22 22:35:04 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Wed May 22 22:35:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src38.csv
[Wed May 22 22:35:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:18 2013] Spatial fit model total counts = 1510.130000, observed total counts = 1510.000000
[Wed May 22 22:35:18 2013] Offset between fit and detection position for source 40 = 0.590847 pixels
[Wed May 22 22:35:18 2013] Warning, changing simple spatial fit ID from 38 to 34
[Wed May 22 22:35:18 2013] 1477.819900 total counts/ 1466.090000 bgd. counts: snr = 0.306347
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.590847 pixels
  Position = (294.9, 288.3) = 15 32 32.57 4 38 34.5
  Extent = 1.7" x 1.7", rotation angle = 0
  Source counts = 11.7 +/- 38.4
  Background counts = 1466.1
  Rate = 0.0004 +/- 0.001
  Deleting source due to low Poisson probability