[Wed May 22 22:34:35 2013] Detection parameters: Position = (318.5, 306.1) = 15 32 25.70 4 39 52.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 125.4 +/- 22.7 Background counts = 146.8 Rate = 0.004 +/- 0.0007 [Wed May 22 22:34:36 2013] Off-axis axis estimate = 1.56' [Wed May 22 22:35:02 2013] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting [Wed May 22 22:35:02 2013] Initial guess for spatial extent in simple fitting = 7.21" [Wed May 22 22:35:02 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.075 [Wed May 22 22:35:02 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 7.21" [Wed May 22 22:35:03 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src29.ximg exists [Wed May 22 22:35:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src29.csv [Wed May 22 22:35:03 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src29_1.ximg exists [Wed May 22 22:35:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src29.csv [Wed May 22 22:35:03 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src29_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 22 22:35:04 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src29.ximg exists [Wed May 22 22:35:04 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists [Wed May 22 22:35:04 2013] Fit fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly [Wed May 22 22:35:18 2013] Spatial fit model total counts = 2225.730000, observed total counts = 2220.000000 [Wed May 22 22:35:18 2013] Offset between fit and detection position for source 31 = 5.345626 pixels [Wed May 22 22:35:18 2013] Warning, changing simple spatial fit ID from 29 to 28 [Wed May 22 22:35:18 2013] 2203.163000 total counts/ 2058.400000 bgd. counts: snr = 3.190749 Spatial fit parameters: Offset between fit and detection position for source 31 = 5.345626 pixels Position = (314.4, 302.6) = 15 32 26.90 4 39 36.6 Extent = 14.0 (13.9-28.0)", rotation angle = 0 Source counts = 144.8 +/- 46.9 Background counts = 2058.4 Rate = 0.005 +/- 0.002 [Wed May 22 22:35:19 2013] Vigneting correction estimate = 1.000000 [Wed May 22 22:35:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 22 22:35:19 2013] Assessing source extent using major axis lower bound [Wed May 22 22:35:19 2013] Source does appear to be extended [Wed May 22 22:35:19 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 22 22:35:19 2013] Source is confused with source 30 [Wed May 22 22:35:41 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Wed May 22 22:35:41 2013] Initial guess for spatial extent in simple fitting = 13.99" [Wed May 22 22:35:41 2013] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.887 [Wed May 22 22:35:41 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 13.99" [Wed May 22 22:35:42 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src27.ximg exists [Wed May 22 22:35:42 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src27_1.ximg exists [Wed May 22 22:35:42 2013] Fit fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src27 appears to have run properly [Wed May 22 22:35:43 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src27.ximg exists [Wed May 22 22:35:43 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists [Wed May 22 22:35:43 2013] Fit fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly [Wed May 22 22:35:54 2013] Spatial fit model total counts = 3298.860000, observed total counts = 3300.000000 [Wed May 22 22:35:54 2013] Offset between fit and detection position for source 31 = 2.812098 pixels [Wed May 22 22:35:54 2013] Warning, changing simple spatial fit ID from 27 to 26 [Wed May 22 22:35:54 2013] 3214.902000 total counts/ 2385.910000 bgd. counts: snr = 16.971620 Spatial fit parameters: Offset between fit and detection position for source 31 = 2.812098 pixels Position = (317.1, 302.0) = 15 32 26.10 4 39 33.7 Extent = 27.0 (27.0-54.0)", rotation angle = 0 Source counts = 829.0 +/- 56.7 Background counts = 2385.9 Rate = 0.03 +/- 0.002 [Wed May 22 22:35:54 2013] Vigneting correction estimate = 1.000000 [Wed May 22 22:35:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 22 22:35:54 2013] Assessing source extent using major axis lower bound [Wed May 22 22:35:54 2013] Source does appear to be extended [Wed May 22 22:35:54 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 22 22:36:15 2013] XMMSAS src. selection expression = ellipse(27542.192000, 26222.144000, 1620.192047, 1620.192047, 0.000000, X, Y) [Wed May 22 22:36:15 2013] Not overwriting source region fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src31_src.reg [Wed May 22 22:36:15 2013] Extracting stamp from image fullrun_pn_xmm0091140401_pi300-10000_cl_sm2.00.img.gz, (224, 209) - (410, 395) [Wed May 22 22:36:15 2013] XMMSAS bgd. selection expression = annulus(27542.192000, 26222.144000, 2700.320078, 5400.640155, X, Y) && !ellipse(25770.824400, 27758.580000, 1099.280032, 1099.280032, 0.000000, X, Y) && !ellipse(26431.384247, 29068.109772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25607.186157, 28939.067383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27814.715576, 28007.799927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29021.776855, 28054.812531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26921.365800, 27851.643000, 1167.640034, 1167.640034, 0.000000, X, Y) && !ellipse(32318.794891, 27174.303925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26915.601600, 26814.598000, 1080.128031, 1080.128031, 0.000000, X, Y) && !ellipse(26822.608124, 26257.564789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25104.814789, 26492.649048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26768.368530, 25613.300690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26187.493256, 25442.869049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25363.823517, 25535.516296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27314.672668, 25356.708038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27055.063904, 24937.423157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29764.411600, 24408.164800, 346.768810, 346.768810, 0.000000, X, Y) && !ellipse(33690.539673, 23891.365509, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 22 22:36:15 2013] Writing fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src31.gif [Wed May 22 22:36:18 2013] ../../xmm0091140401/products/events/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src31_src.evt and ../../xmm0091140401/products/events/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src31_bgd.evt exist, delete to re-create [Wed May 22 22:36:18 2013] Mean detx,y = (465.10, 1368.07) [Wed May 22 22:36:18 2013] ../../xmm0091140401/products/images/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src31_src.img and ../../xmm0091140401/products/images/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src31_bgd.img exist, delete to re-create [Wed May 22 22:36:18 2013] ../../xmm0091140401/products/spectra/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src31_src.pi and ../../xmm0091140401/products/spectra/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src31_bgd.pi exist, delete to re-create [Wed May 22 22:36:18 2013] Setting source spectrum file to fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src31_src.pi.gz [Wed May 22 22:36:18 2013] Setting bgd. spectrum file to fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src31_bgd.pi.gz [Wed May 22 22:36:18 2013] ../../xmm0091140401/products/lightcurves/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src31_src.lc and ../../xmm0091140401/products/lightcurves/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src31_bgd.lc exist, delete to re-create [Wed May 22 22:46:05 2013] Updating aperture counts using extracted products [Wed May 22 22:46:05 2013] Total counts from fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src31_src.pi.gz = 6747.00 [Wed May 22 22:46:05 2013] Total counts from fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src31_bgd.pi.gz = 19820.00 [Wed May 22 22:46:05 2013] Got source and background scale factors 8240000.000000, 50391417.000000 [Wed May 22 22:46:05 2013] User source parameters: Position = (317.1, 302.0) = 15 32 26.10 4 39 33.7 Extent = 27.0 (27.0-54.0)", rotation angle = 0 Source aperture counts = 3506.0 +/- 83.1 Background aperture counts = 3241.0 Rate = 0.1 +/- 0.003 [Wed May 22 22:46:08 2013] No arf file for this source, not re-computing flux [Wed May 22 22:46:22 2013] Flag c found in src. 31 procflags, skipping spectral fitting [Wed May 22 22:46:22 2013] Source 31 has no response, skipping [Wed May 22 22:46:23 2013] xmm0091140401/analysis//spectral/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete