[Wed May 22 22:34:34 2013] Detection parameters:
  Position = (309.0, 320.0) = 15 32 28.46 4 40 51.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 472.4 +/- 34.6
  Background counts = 157.3
  Rate = 0.01 +/- 0.001

[Wed May 22 22:34:36 2013] Off-axis axis estimate = 1.74'
[Wed May 22 22:35:02 2013] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Wed May 22 22:35:02 2013] Initial guess for spatial extent in simple fitting = 7.30"
[Wed May 22 22:35:02 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Wed May 22 22:35:02 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 7.30"
[Wed May 22 22:35:03 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src24.ximg exists
[Wed May 22 22:35:03 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src24_1.ximg exists
[Wed May 22 22:35:03 2013] Fit fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src24 appears to have run properly
[Wed May 22 22:35:04 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Wed May 22 22:35:04 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Wed May 22 22:35:04 2013] Fit fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Wed May 22 22:35:18 2013] Source 26 is offset by -4.001495 and -1.465594 pixels which is larger than
2 X fitted extent = 3.837715 x 3.837715, not incorporating fit results
[Wed May 22 22:35:18 2013] Spatial fit model total counts = 3200.500000, observed total counts = 3200.000000
[Wed May 22 22:35:18 2013] Offset between fit and detection position for source 26 = 1.233157 pixels
[Wed May 22 22:35:18 2013] 3059.196000 total counts/ 2718.770000 bgd. counts: snr = 6.528847
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 1.233157 pixels
  Position = (310.0, 320.7) = 15 32 28.18 4 40 55.2
  Extent = 14.6 (14.6-29.2)", rotation angle = 0
  Source counts = 340.4 +/- 55.3
  Background counts = 2718.8
  Rate = 0.01 +/- 0.002
[Wed May 22 22:35:19 2013] Vigneting correction estimate = 1.000000
[Wed May 22 22:35:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 22:35:19 2013] Assessing source extent using major axis lower bound
[Wed May 22 22:35:19 2013] Source does appear to be extended
[Wed May 22 22:35:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 22:35:41 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 22 22:35:41 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 22 22:35:41 2013] Initial guess for spatial extent in simple fitting = 14.60"
[Wed May 22 22:35:41 2013] source mask rpix=3.4, npix_max = 59, mask sum = 64, frac = 1.076
[Wed May 22 22:35:41 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 14.60"
[Wed May 22 22:35:42 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src23.ximg exists
[Wed May 22 22:35:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src23.csv
[Wed May 22 22:35:42 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src23_1.ximg exists
[Wed May 22 22:35:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src23.csv
[Wed May 22 22:35:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:42 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Wed May 22 22:35:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src23.csv
[Wed May 22 22:35:42 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Wed May 22 22:35:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src23.csv
[Wed May 22 22:35:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:54 2013] Warning, spatial fit 23 centroid is now closest to src. 24
[Wed May 22 22:35:54 2013] Vigneting correction estimate = 1.000000
[Wed May 22 22:35:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 22:35:54 2013] Assessing source extent using major axis lower bound
[Wed May 22 22:35:54 2013] Source does appear to be extended
[Wed May 22 22:35:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 22:36:15 2013] XMMSAS src. selection expression = ellipse(26921.365800, 27851.643000, 875.730025, 875.730025, 0.000000, X, Y)
[Wed May 22 22:36:15 2013] Not overwriting source region fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src26_src.reg
[Wed May 22 22:36:15 2013] Extracting stamp from image fullrun_pn_xmm0091140401_pi300-10000_cl_sm2.00.img.gz, (260, 270) - (360, 371)
[Wed May 22 22:36:15 2013] XMMSAS bgd. selection expression = annulus(26921.365800, 27851.643000, 1459.550042, 2919.100084, X, Y) && !ellipse(25770.824400, 27758.580000, 1099.280032, 1099.280032, 0.000000, X, Y) && !ellipse(26431.384247, 29068.109772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25607.186157, 28939.067383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27814.715576, 28007.799927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29021.776855, 28054.812531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26915.601600, 26814.598000, 1080.128031, 1080.128031, 0.000000, X, Y) && !ellipse(27542.192000, 26222.144000, 2160.256062, 2160.256062, 0.000000, X, Y) && !ellipse(26822.608124, 26257.564789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25104.814789, 26492.649048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26768.368530, 25613.300690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26187.493256, 25442.869049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25363.823517, 25535.516296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27314.672668, 25356.708038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27055.063904, 24937.423157, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 22:36:15 2013] Writing fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src26.gif
[Wed May 22 22:36:18 2013] ../../xmm0091140401/products/events/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src26_src.evt and ../../xmm0091140401/products/events/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src26_bgd.evt exist, delete to re-create
[Wed May 22 22:36:18 2013] Mean detx,y = (239.94, -172.57) 
[Wed May 22 22:36:18 2013] ../../xmm0091140401/products/images/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src26_src.img and ../../xmm0091140401/products/images/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src26_bgd.img exist, delete to re-create
[Wed May 22 22:36:18 2013] ../../xmm0091140401/products/spectra/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src26_src.pi and ../../xmm0091140401/products/spectra/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src26_bgd.pi exist, delete to re-create
[Wed May 22 22:36:18 2013] Setting source spectrum file to fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src26_src.pi.gz
[Wed May 22 22:36:18 2013] Setting bgd. spectrum file to fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Wed May 22 22:36:18 2013] ../../xmm0091140401/products/lightcurves/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src26_src.lc and ../../xmm0091140401/products/lightcurves/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src26_bgd.lc exist, delete to re-create
[Wed May 22 22:46:04 2013] Updating aperture counts using extracted products
[Wed May 22 22:46:04 2013] Total counts from fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src26_src.pi.gz = 3627.00
[Wed May 22 22:46:04 2013] Total counts from fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src26_bgd.pi.gz = 3514.00
[Wed May 22 22:46:04 2013] Got source and background scale factors 2379634.000000, 5422853.000000
[Wed May 22 22:46:04 2013] User source parameters:
  Position = (310.0, 320.7) = 15 32 28.18 4 40 55.2
  Extent = 14.6 (14.6-29.2)", rotation angle = 0
  Source aperture counts = 2085.0 +/- 61.2
  Background aperture counts = 1542.0
  Rate = 0.08 +/- 0.002

[Wed May 22 22:46:08 2013] No arf file for this source, not re-computing flux
[Wed May 22 22:46:22 2013] Flag b found in src. 26 procflags, skipping spectral fitting
[Wed May 22 22:46:22 2013] Source 26 has no response, skipping
[Wed May 22 22:46:23 2013] xmm0091140401/analysis//spectral/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete