[Wed May 22 22:34:34 2013] Detection parameters:
  Position = (334.1, 323.0) = 15 32 21.15 4 41 4.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.8 +/- 22.3
  Background counts = 145.7
  Rate = 0.004 +/- 0.0007

[Wed May 22 22:34:36 2013] Off-axis axis estimate = 3.14'
[Wed May 22 22:35:02 2013] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Wed May 22 22:35:02 2013] Initial guess for spatial extent in simple fitting = 8.00"
[Wed May 22 22:35:02 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.731
[Wed May 22 22:35:02 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 8.00"
[Wed May 22 22:35:03 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src23.ximg exists
[Wed May 22 22:35:03 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src23_1.ximg exists
[Wed May 22 22:35:03 2013] Fit fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src23 appears to have run properly
[Wed May 22 22:35:04 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Wed May 22 22:35:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src23.csv
[Wed May 22 22:35:04 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Wed May 22 22:35:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src23.csv
[Wed May 22 22:35:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:18 2013] Source 25 is offset by -6.485346 and -7.599879 pixels which is larger than
2 X fitted extent = 0.828308 x 0.828308, not incorporating fit results
[Wed May 22 22:35:19 2013] Vigneting correction estimate = 1.000000
[Wed May 22 22:35:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 22:35:19 2013] Assessing source extent using major
[Wed May 22 22:35:19 2013] Source does appear to be extended
[Wed May 22 22:35:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 22:35:41 2013] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Wed May 22 22:35:41 2013] Initial guess for spatial extent in simple fitting = 8.00"
[Wed May 22 22:35:41 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.731
[Wed May 22 22:35:41 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 8.00"
[Wed May 22 22:35:42 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src22.ximg exists
[Wed May 22 22:35:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src22.csv
[Wed May 22 22:35:42 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src22_1.ximg exists
[Wed May 22 22:35:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src22.csv
[Wed May 22 22:35:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:42 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Wed May 22 22:35:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src22.csv
[Wed May 22 22:35:42 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Wed May 22 22:35:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src22.csv
[Wed May 22 22:35:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:54 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 11.020285 pixels away
[Wed May 22 22:35:54 2013] Vigneting correction estimate = 1.000000
[Wed May 22 22:35:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 22:35:54 2013] Assessing source extent using major
[Wed May 22 22:35:54 2013] Source does appear to be extended
[Wed May 22 22:35:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 22:36:15 2013] XMMSAS src. selection expression = ellipse(29021.776855, 28054.812531, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 22:36:15 2013] Not overwriting source region fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src25_src.reg
[Wed May 22 22:36:15 2013] Extracting stamp from image fullrun_pn_xmm0091140401_pi300-10000_cl_sm2.00.img.gz, (297, 286) - (372, 361)
[Wed May 22 22:36:15 2013] XMMSAS bgd. selection expression = annulus(29021.776855, 28054.812531, 1087.500000, 2175.000000, X, Y) && !ellipse(25770.824400, 27758.580000, 1099.280032, 1099.280032, 0.000000, X, Y) && !ellipse(26431.384247, 29068.109772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27814.715576, 28007.799927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26921.365800, 27851.643000, 1167.640034, 1167.640034, 0.000000, X, Y) && !ellipse(26915.601600, 26814.598000, 1080.128031, 1080.128031, 0.000000, X, Y) && !ellipse(27542.192000, 26222.144000, 2160.256062, 2160.256062, 0.000000, X, Y) && !ellipse(26822.608124, 26257.564789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26768.368530, 25613.300690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26187.493256, 25442.869049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27314.672668, 25356.708038, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 22:36:15 2013] Writing fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src25.gif
[Wed May 22 22:36:18 2013] ../../xmm0091140401/products/events/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src25_src.evt and ../../xmm0091140401/products/events/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src25_bgd.evt exist, delete to re-create
[Wed May 22 22:36:18 2013] Mean detx,y = (2436.56, 146.22) 
[Wed May 22 22:36:18 2013] ../../xmm0091140401/products/images/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src25_src.img and ../../xmm0091140401/products/images/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src25_bgd.img exist, delete to re-create
[Wed May 22 22:36:18 2013] ../../xmm0091140401/products/spectra/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src25_src.pi and ../../xmm0091140401/products/spectra/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src25_bgd.pi exist, delete to re-create
[Wed May 22 22:36:18 2013] Setting source spectrum file to fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src25_src.pi.gz
[Wed May 22 22:36:18 2013] Setting bgd. spectrum file to fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Wed May 22 22:36:18 2013] ../../xmm0091140401/products/lightcurves/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src25_src.lc and ../../xmm0091140401/products/lightcurves/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src25_bgd.lc exist, delete to re-create
[Wed May 22 22:42:44 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 22:42:44 2013] rmf not generated due to insufficient counts
[Wed May 22 22:46:04 2013] Updating aperture counts using extracted products
[Wed May 22 22:46:04 2013] Total counts from fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src25_src.pi.gz = 821.00
[Wed May 22 22:46:04 2013] Total counts from fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src25_bgd.pi.gz = 1941.00
[Wed May 22 22:46:04 2013] Got source and background scale factors 1320720.000000, 4788660.000000
[Wed May 22 22:46:04 2013] User source parameters:
  Position = (334.1, 323.0) = 15 32 21.15 4 41 4.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 285.7 +/- 29.7
  Background aperture counts = 535.3
  Rate = 0.01 +/- 0.001

[Wed May 22 22:46:04 2013] Updating counts from extracted products
[Wed May 22 22:46:04 2013] Set source signif. to 285.67/23.14 = 12.35
[Wed May 22 22:46:08 2013] No arf file for this source, not re-computing flux
[Wed May 22 22:46:22 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 22:46:23 2013] xmm0091140401/analysis//spectral/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete