[Wed May 22 22:34:33 2013] Detection parameters:
  Position = (380.1, 415.6) = 15 32 7.76 4 47 48.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 371.4 +/- 25.2
  Background counts = 83.6
  Rate = 0.01 +/- 0.0007

[Wed May 22 22:34:36 2013] Off-axis axis estimate = 10.36'
[Wed May 22 22:35:02 2013] Using EEF radius (= 11.61 ")to estimate initial spatial extent for simple fitting
[Wed May 22 22:35:02 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 22 22:35:02 2013] Initial guess for spatial extent in simple fitting = 11.61"
[Wed May 22 22:35:02 2013] source mask rpix=2.7, npix_max = 40, mask sum = 38, frac = 0.946
[Wed May 22 22:35:02 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 11.61"
[Wed May 22 22:35:02 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 22 22:35:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src1.csv
[Wed May 22 22:35:02 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 22 22:35:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src1.csv
[Wed May 22 22:35:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:03 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 22 22:35:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed May 22 22:35:03 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 22 22:35:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed May 22 22:35:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:18 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.260728 pixels away
[Wed May 22 22:35:19 2013] Vigneting correction estimate = 1.000000
[Wed May 22 22:35:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 22:35:19 2013] Assessing source extent using major
[Wed May 22 22:35:19 2013] Source does appear to be extended
[Wed May 22 22:35:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 22:35:41 2013] Using EEF radius (= 11.61 ")to estimate initial spatial extent for simple fitting
[Wed May 22 22:35:41 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 22 22:35:41 2013] Initial guess for spatial extent in simple fitting = 11.61"
[Wed May 22 22:35:41 2013] source mask rpix=2.7, npix_max = 40, mask sum = 38, frac = 0.946
[Wed May 22 22:35:41 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 11.61"
[Wed May 22 22:35:41 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src1.ximg exists
[Wed May 22 22:35:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src1.csv
[Wed May 22 22:35:41 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May 22 22:35:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src1.csv
[Wed May 22 22:35:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:42 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May 22 22:35:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed May 22 22:35:42 2013] fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 22 22:35:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed May 22 22:35:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:54 2013] Spatial fit model total counts = 1136.480000, observed total counts = 1009.000000
[Wed May 22 22:35:54 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 22 22:35:54 2013] Vigneting correction estimate = 1.000000
[Wed May 22 22:35:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 22:35:54 2013] Assessing source extent using major
[Wed May 22 22:35:54 2013] Source does appear to be extended
[Wed May 22 22:35:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 22:36:15 2013] XMMSAS src. selection expression = ellipse(33022.969727, 36112.080383, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 22:36:15 2013] Not overwriting source region fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src1_src.reg
[Wed May 22 22:36:15 2013] Extracting stamp from image fullrun_pn_xmm0091140401_pi300-10000_cl_sm2.00.img.gz, (343, 378) - (418, 453)
[Wed May 22 22:36:15 2013] XMMSAS bgd. selection expression = annulus(33022.969727, 36112.080383, 1087.500000, 2175.000000, X, Y) && !ellipse(36055.674286, 35960.236603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35143.892000, 37191.442000, 1988.928057, 1880.912054, 299.112000, X, Y)
[Wed May 22 22:36:15 2013] Writing fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src1.gif
[Wed May 22 22:36:16 2013] ../../xmm0091140401/products/events/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0091140401/products/events/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed May 22 22:36:16 2013] Mean detx,y = (8179.41, -6772.98) 
[Wed May 22 22:36:16 2013] ../../xmm0091140401/products/images/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src1_src.img and ../../xmm0091140401/products/images/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed May 22 22:36:16 2013] ../../xmm0091140401/products/spectra/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src1_src.pi and ../../xmm0091140401/products/spectra/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed May 22 22:36:16 2013] Setting source spectrum file to fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src1_src.pi.gz
[Wed May 22 22:36:16 2013] Setting bgd. spectrum file to fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May 22 22:36:16 2013] ../../xmm0091140401/products/lightcurves/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0091140401/products/lightcurves/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed May 22 22:42:42 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 22:42:42 2013] rmf not generated due to insufficient counts
[Wed May 22 22:45:59 2013] Updating aperture counts using extracted products
[Wed May 22 22:45:59 2013] Total counts from fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src1_src.pi.gz = 544.00
[Wed May 22 22:45:59 2013] Total counts from fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1605.00
[Wed May 22 22:45:59 2013] Got source and background scale factors 1145348.000000, 7440715.000000
[Wed May 22 22:45:59 2013] User source parameters:
  Position = (380.1, 415.6) = 15 32 7.76 4 47 48.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 296.9 +/- 24.3
  Background aperture counts = 247.1
  Rate = 0.01 +/- 0.0009

[Wed May 22 22:45:59 2013] Updating counts from extracted products
[Wed May 22 22:45:59 2013] Set source signif. to 296.94/15.72 = 18.89
[Wed May 22 22:46:08 2013] No arf file for this source, not re-computing flux
[Wed May 22 22:46:22 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 22:46:23 2013] xmm0091140401/analysis//spectral/fullrun_pn_xmm0091140401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete