[Wed May 22 22:34:39 2013] Detection parameters:
  Position = (377.6, 375.1) = 15 32 8.51 4 44 52.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.1 +/- 18.3
  Background counts = 72.2
  Rate = 0.005 +/- 0.0007

[Wed May 22 22:34:40 2013] Off-axis axis estimate = 7.99'
[Wed May 22 22:35:06 2013] Using EEF radius (= 10.42 ")to estimate initial spatial extent for simple fitting
[Wed May 22 22:35:06 2013] Initial guess for spatial extent in simple fitting = 10.42"
[Wed May 22 22:35:06 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.894
[Wed May 22 22:35:06 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 10.42"
[Wed May 22 22:35:07 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src7.ximg exists
[Wed May 22 22:35:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src7.csv
[Wed May 22 22:35:07 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed May 22 22:35:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src7.csv
[Wed May 22 22:35:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:07 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed May 22 22:35:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed May 22 22:35:07 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed May 22 22:35:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed May 22 22:35:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:29 2013] Source 7 is offset by -5.855171 and -5.975263 pixels which is larger than
2 X fitted extent = 0.802212 x 0.802212, not incorporating fit results
[Wed May 22 22:35:29 2013] Vigneting correction estimate = 1.000000
[Wed May 22 22:35:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 22:35:29 2013] Assessing source extent using major
[Wed May 22 22:35:29 2013] Source does appear to be extended
[Wed May 22 22:35:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 22:35:45 2013] Using EEF radius (= 10.42 ")to estimate initial spatial extent for simple fitting
[Wed May 22 22:35:45 2013] Initial guess for spatial extent in simple fitting = 10.42"
[Wed May 22 22:35:45 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.894
[Wed May 22 22:35:45 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 10.42"
[Wed May 22 22:35:45 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src7.ximg exists
[Wed May 22 22:35:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src7.csv
[Wed May 22 22:35:45 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed May 22 22:35:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src7.csv
[Wed May 22 22:35:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:46 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed May 22 22:35:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src7.csv
[Wed May 22 22:35:46 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed May 22 22:35:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src7.csv
[Wed May 22 22:35:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:36:04 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 12.545309 pixels away
[Wed May 22 22:36:04 2013] Vigneting correction estimate = 1.000000
[Wed May 22 22:36:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 22:36:04 2013] Assessing source extent using major
[Wed May 22 22:36:04 2013] Source does appear to be extended
[Wed May 22 22:36:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 22:45:05 2013] XMMSAS src. selection expression = ellipse(32799.440155, 32588.036102, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 22:45:05 2013] Not overwriting source region fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src7_src.reg
[Wed May 22 22:45:05 2013] Extracting stamp from image fullrun_mos2_xmm0091140401_pi300-10000_cl_sm2.00.img.gz, (340, 338) - (415, 413)
[Wed May 22 22:45:05 2013] XMMSAS bgd. selection expression = annulus(32799.440155, 32588.036102, 1087.500000, 2175.000000, X, Y)
[Wed May 22 22:45:05 2013] Writing fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src7.gif
[Wed May 22 22:45:06 2013] ../../xmm0091140401/products/events/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src7_src.evt and ../../xmm0091140401/products/events/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src7_bgd.evt exist, delete to re-create
[Wed May 22 22:45:06 2013] Mean detx,y = (-7036.02, 3263.20) 
[Wed May 22 22:45:06 2013] ../../xmm0091140401/products/images/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src7_src.img and ../../xmm0091140401/products/images/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src7_bgd.img exist, delete to re-create
[Wed May 22 22:45:06 2013] ../../xmm0091140401/products/spectra/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src7_src.pi and ../../xmm0091140401/products/spectra/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src7_bgd.pi exist, delete to re-create
[Wed May 22 22:45:06 2013] Setting source spectrum file to fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src7_src.pi.gz
[Wed May 22 22:45:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed May 22 22:45:06 2013] ../../xmm0091140401/products/lightcurves/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src7_src.lc and ../../xmm0091140401/products/lightcurves/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src7_bgd.lc exist, delete to re-create
[Wed May 22 22:45:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 22:45:11 2013] rmf not generated due to insufficient counts
[Wed May 22 22:46:14 2013] Updating aperture counts using extracted products
[Wed May 22 22:46:14 2013] Total counts from fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src7_src.pi.gz = 231.00
[Wed May 22 22:46:14 2013] Total counts from fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src7_bgd.pi.gz = 1292.00
[Wed May 22 22:46:14 2013] Got source and background scale factors 1186672.000000, 10745984.000000
[Wed May 22 22:46:14 2013] User source parameters:
  Position = (377.6, 375.1) = 15 32 8.51 4 44 52.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 88.3 +/- 16.2
  Background aperture counts = 142.7
  Rate = 0.003 +/- 0.0005

[Wed May 22 22:46:14 2013] Updating counts from extracted products
[Wed May 22 22:46:14 2013] Set source signif. to 88.33/11.94 = 7.39
[Wed May 22 22:46:17 2013] No arf file for this source, not re-computing flux
[Wed May 22 22:46:21 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 22:46:22 2013] xmm0091140401/analysis//spectral/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete