[Wed May 22 22:34:40 2013] Detection parameters:
  Position = (179.5, 275.1) = 15 33 6.13 4 37 36.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.1 +/- 14.2
  Background counts = 58.4
  Rate = 0.002 +/- 0.0003

[Wed May 22 22:34:40 2013] Off-axis axis estimate = 8.79'
[Wed May 22 22:35:06 2013] Using EEF radius (= 10.82 ")to estimate initial spatial extent for simple fitting
[Wed May 22 22:35:06 2013] Initial guess for spatial extent in simple fitting = 10.82"
[Wed May 22 22:35:06 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.008
[Wed May 22 22:35:06 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 10.82"
[Wed May 22 22:35:07 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src28.ximg exists
[Wed May 22 22:35:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src28.csv
[Wed May 22 22:35:07 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src28_1.ximg exists
[Wed May 22 22:35:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src28.csv
[Wed May 22 22:35:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:07 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Wed May 22 22:35:07 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Wed May 22 22:35:07 2013] Fit fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Wed May 22 22:35:29 2013] Spatial fit model total counts = 216.825000, observed total counts = 217.000000
[Wed May 22 22:35:29 2013] Offset between fit and detection position for source 28 = 0.317980 pixels
[Wed May 22 22:35:29 2013] 218.063700 total counts/ 180.783000 bgd. counts: snr = 2.772715
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.317980 pixels
  Position = (179.7, 274.8) = 15 33 6.10 4 37 35.4
  Extent = 3.4 (2.7-5.1)", rotation angle = 0
  Source counts = 37.3 +/- 14.8
  Background counts = 180.8
  Rate = 0.001 +/- 0.0004
[Wed May 22 22:35:29 2013] Vigneting correction estimate = 1.000000
[Wed May 22 22:35:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 22:35:29 2013] Assessing source extent using major axis lower bound
[Wed May 22 22:35:29 2013] Source does appear to be extended
[Wed May 22 22:35:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 22:35:45 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 22 22:35:45 2013] Initial guess for spatial extent in simple fitting = 3.44"
[Wed May 22 22:35:45 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.351
[Wed May 22 22:35:45 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 3.44"
[Wed May 22 22:35:46 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src27.ximg exists
[Wed May 22 22:35:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src27.csv
[Wed May 22 22:35:46 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src27_1.ximg exists
[Wed May 22 22:35:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src27.csv
[Wed May 22 22:35:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:46 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Wed May 22 22:35:46 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Wed May 22 22:35:46 2013] Fit fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Wed May 22 22:36:04 2013] Spatial fit model total counts = 216.707000, observed total counts = 217.000000
[Wed May 22 22:36:04 2013] Offset between fit and detection position for source 28 = 0.004020 pixels
[Wed May 22 22:36:04 2013] 217.942300 total counts/ 180.591000 bgd. counts: snr = 2.779442
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.004020 pixels
  Position = (179.7, 274.8) = 15 33 6.10 4 37 35.4
  Extent = 3.5 (2.6-5.2)", rotation angle = 0
  Source counts = 37.4 +/- 14.8
  Background counts = 180.6
  Rate = 0.001 +/- 0.0004
[Wed May 22 22:36:04 2013] Vigneting correction estimate = 1.000000
[Wed May 22 22:36:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 22:36:04 2013] Assessing source extent using major axis lower bound
[Wed May 22 22:36:04 2013] Source does appear to be extended
[Wed May 22 22:36:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 22:45:06 2013] XMMSAS src. selection expression = ellipse(15581.866800, 23856.939800, 208.287606, 208.287606, 0.000000, X, Y)
[Wed May 22 22:45:06 2013] Not overwriting source region fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src28_src.reg
[Wed May 22 22:45:06 2013] Extracting stamp from image fullrun_mos2_xmm0091140401_pi300-10000_cl_sm2.00.img.gz, (168, 263) - (192, 287)
[Wed May 22 22:45:06 2013] XMMSAS bgd. selection expression = annulus(15581.866800, 23856.939800, 347.146010, 694.292020, X, Y)
[Wed May 22 22:45:06 2013] Writing fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src28.gif
[Wed May 22 22:45:07 2013] ../../xmm0091140401/products/events/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src28_src.evt and ../../xmm0091140401/products/events/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src28_bgd.evt exist, delete to re-create
[Wed May 22 22:45:07 2013] Mean detx,y = (11720.79, -1274.88) 
[Wed May 22 22:45:07 2013] ../../xmm0091140401/products/images/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src28_src.img and ../../xmm0091140401/products/images/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src28_bgd.img exist, delete to re-create
[Wed May 22 22:45:07 2013] ../../xmm0091140401/products/spectra/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src28_src.pi and ../../xmm0091140401/products/spectra/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src28_bgd.pi exist, delete to re-create
[Wed May 22 22:45:07 2013] Setting source spectrum file to fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src28_src.pi.gz
[Wed May 22 22:45:07 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Wed May 22 22:45:07 2013] ../../xmm0091140401/products/lightcurves/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src28_src.lc and ../../xmm0091140401/products/lightcurves/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src28_bgd.lc exist, delete to re-create
[Wed May 22 22:45:13 2013] Not generating rmf since there are only 37 counts
[Wed May 22 22:45:13 2013] rmf not generated due to insufficient counts
[Wed May 22 22:46:17 2013] Updating aperture counts using extracted products
[Wed May 22 22:46:17 2013] Total counts from fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src28_src.pi.gz = 52.00
[Wed May 22 22:46:17 2013] Total counts from fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src28_bgd.pi.gz = 109.00
[Wed May 22 22:46:17 2013] Got source and background scale factors 137600.000000, 1123160.000000
[Wed May 22 22:46:17 2013] User source parameters:
  Position = (179.7, 274.8) = 15 33 6.10 4 37 35.4
  Extent = 3.5 (2.6-5.2)", rotation angle = 0
  Source aperture counts = 38.6 +/- 8.3
  Background aperture counts = 13.4
  Rate = 0.001 +/- 0.0002

[Wed May 22 22:46:17 2013] No arf file for this source, not re-computing flux
[Wed May 22 22:46:21 2013] Source 28 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 22 22:46:22 2013] xmm0091140401/analysis//spectral/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete