[Wed May 22 22:34:39 2013] Detection parameters:
  Position = (240.0, 305.3) = 15 32 48.55 4 39 50.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 348.7 +/- 25.3
  Background counts = 76.2
  Rate = 0.01 +/- 0.0008

[Wed May 22 22:34:40 2013] Off-axis axis estimate = 4.27'
[Wed May 22 22:35:06 2013] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Wed May 22 22:35:06 2013] Initial guess for spatial extent in simple fitting = 8.56"
[Wed May 22 22:35:06 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.821
[Wed May 22 22:35:06 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 8.56"
[Wed May 22 22:35:06 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 22 22:35:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src3.csv
[Wed May 22 22:35:07 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 22 22:35:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src3.csv
[Wed May 22 22:35:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:07 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 22 22:35:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May 22 22:35:07 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 22 22:35:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May 22 22:35:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:29 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 10.624611 pixels away
[Wed May 22 22:35:29 2013] Vigneting correction estimate = 1.000000
[Wed May 22 22:35:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 22:35:29 2013] Assessing source extent using major
[Wed May 22 22:35:29 2013] Source does appear to be extended
[Wed May 22 22:35:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 22:35:45 2013] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Wed May 22 22:35:45 2013] Initial guess for spatial extent in simple fitting = 8.56"
[Wed May 22 22:35:45 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.821
[Wed May 22 22:35:45 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 8.56"
[Wed May 22 22:35:45 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src3.ximg exists
[Wed May 22 22:35:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src3.csv
[Wed May 22 22:35:45 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed May 22 22:35:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src3.csv
[Wed May 22 22:35:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:46 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed May 22 22:35:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed May 22 22:35:46 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May 22 22:35:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed May 22 22:35:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:36:04 2013] Source 20 is offset by -7.844279 and 0.192360 pixels which is larger than
2 X fitted extent = 0.977343 x 0.977343, not incorporating fit results
[Wed May 22 22:36:04 2013] Vigneting correction estimate = 1.000000
[Wed May 22 22:36:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 22:36:04 2013] Assessing source extent using major
[Wed May 22 22:36:04 2013] Source does appear to be extended
[Wed May 22 22:36:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 22:45:05 2013] XMMSAS src. selection expression = ellipse(20829.277740, 26511.603302, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 22:45:05 2013] Not overwriting source region fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src20_src.reg
[Wed May 22 22:45:05 2013] Extracting stamp from image fullrun_mos2_xmm0091140401_pi300-10000_cl_sm2.00.img.gz, (202, 268) - (277, 343)
[Wed May 22 22:45:05 2013] XMMSAS bgd. selection expression = annulus(20829.277740, 26511.603302, 1087.500000, 2175.000000, X, Y)
[Wed May 22 22:45:05 2013] Writing fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src20.gif
[Wed May 22 22:45:06 2013] ../../xmm0091140401/products/events/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src20_src.evt and ../../xmm0091140401/products/events/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src20_bgd.evt exist, delete to re-create
[Wed May 22 22:45:06 2013] Mean detx,y = (5998.49, 140.06) 
[Wed May 22 22:45:06 2013] ../../xmm0091140401/products/images/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src20_src.img and ../../xmm0091140401/products/images/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src20_bgd.img exist, delete to re-create
[Wed May 22 22:45:06 2013] ../../xmm0091140401/products/spectra/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src20_src.pi and ../../xmm0091140401/products/spectra/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src20_bgd.pi exist, delete to re-create
[Wed May 22 22:45:06 2013] Setting source spectrum file to fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src20_src.pi.gz
[Wed May 22 22:45:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Wed May 22 22:45:06 2013] ../../xmm0091140401/products/lightcurves/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src20_src.lc and ../../xmm0091140401/products/lightcurves/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src20_bgd.lc exist, delete to re-create
[Wed May 22 22:45:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 22:45:10 2013] rmf not generated due to insufficient counts
[Wed May 22 22:46:13 2013] Updating aperture counts using extracted products
[Wed May 22 22:46:13 2013] Total counts from fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src20_src.pi.gz = 409.00
[Wed May 22 22:46:13 2013] Total counts from fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src20_bgd.pi.gz = 1383.00
[Wed May 22 22:46:13 2013] Got source and background scale factors 1296926.000000, 10481075.000000
[Wed May 22 22:46:13 2013] User source parameters:
  Position = (240.0, 305.3) = 15 32 48.55 4 39 50.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 237.9 +/- 21.2
  Background aperture counts = 171.1
  Rate = 0.007 +/- 0.0006

[Wed May 22 22:46:13 2013] Updating counts from extracted products
[Wed May 22 22:46:13 2013] Set source signif. to 237.87/13.08 = 18.18
[Wed May 22 22:46:17 2013] No arf file for this source, not re-computing flux
[Wed May 22 22:46:21 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 22:46:22 2013] xmm0091140401/analysis//spectral/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete