[Wed May 22 22:34:39 2013] Detection parameters:
  Position = (302.2, 313.2) = 15 32 30.45 4 40 23.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 195.3 +/- 24.3
  Background counts = 109.4
  Rate = 0.005 +/- 0.0006

[Wed May 22 22:34:40 2013] Off-axis axis estimate = 1.10'
[Wed May 22 22:35:06 2013] Using EEF radius (= 6.98 ")to estimate initial spatial extent for simple fitting
[Wed May 22 22:35:06 2013] Initial guess for spatial extent in simple fitting = 6.98"
[Wed May 22 22:35:06 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.903
[Wed May 22 22:35:06 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 6.98"
[Wed May 22 22:35:07 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src8.ximg exists
[Wed May 22 22:35:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src8.csv
[Wed May 22 22:35:07 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src8_1.ximg exists
[Wed May 22 22:35:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src8.csv
[Wed May 22 22:35:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:07 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Wed May 22 22:35:07 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Wed May 22 22:35:07 2013] Fit fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Wed May 22 22:35:29 2013] Warning, spatial fit 8 centroid is now closest to src. 18
[Wed May 22 22:35:29 2013] Source 13 is offset by 6.393467 and 0.883979 pixels which is larger than
2 X fitted extent = 4.298262 x 4.298262, not incorporating fit results
[Wed May 22 22:35:29 2013] Source 13 is offset by 3.364640 and 3.052163 pixels which is larger than
2 X fitted extent = 0.811982 x 0.811982, not incorporating fit results
[Wed May 22 22:35:29 2013] Vigneting correction estimate = 1.000000
[Wed May 22 22:35:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 22:35:29 2013] Assessing source extent using major
[Wed May 22 22:35:29 2013] Source does appear to be extended
[Wed May 22 22:35:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 22:35:29 2013] Source is confused with source 17
[Wed May 22 22:35:45 2013] Using EEF radius (= 6.98 ")to estimate initial spatial extent for simple fitting
[Wed May 22 22:35:45 2013] Initial guess for spatial extent in simple fitting = 6.98"
[Wed May 22 22:35:45 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.903
[Wed May 22 22:35:45 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 6.98"
[Wed May 22 22:35:45 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src8.ximg exists
[Wed May 22 22:35:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src8.csv
[Wed May 22 22:35:45 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src8_1.ximg exists
[Wed May 22 22:35:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src8.csv
[Wed May 22 22:35:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:46 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Wed May 22 22:35:46 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Wed May 22 22:35:46 2013] Fit fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Wed May 22 22:36:04 2013] Warning, spatial fit 8 centroid is now closest to src. 16
[Wed May 22 22:36:04 2013] Source 13 is offset by 6.565123 and 0.942163 pixels which is larger than
2 X fitted extent = 4.138543 x 4.138543, not incorporating fit results
[Wed May 22 22:36:04 2013] Vigneting correction estimate = 1.000000
[Wed May 22 22:36:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 22:36:04 2013] Assessing source extent using major
[Wed May 22 22:36:04 2013] Source does appear to be extended
[Wed May 22 22:36:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 22:45:05 2013] XMMSAS src. selection expression = ellipse(26242.003662, 27196.152161, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 22:45:05 2013] Not overwriting source region fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src13_src.reg
[Wed May 22 22:45:05 2013] Extracting stamp from image fullrun_mos2_xmm0091140401_pi300-10000_cl_sm2.00.img.gz, (265, 276) - (340, 351)
[Wed May 22 22:45:05 2013] XMMSAS bgd. selection expression = annulus(26242.003662, 27196.152161, 1087.500000, 2175.000000, X, Y) && !ellipse(25739.341000, 27782.003820, 956.224028, 956.224028, 0.000000, X, Y) && !ellipse(26258.286957, 28558.551239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26853.488770, 28220.401398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26858.004974, 27184.390381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27581.561523, 27344.547058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25182.824860, 26510.408539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25900.232361, 28993.572479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25294.584000, 27671.556000, 1138.288033, 1138.288033, 0.000000, X, Y) && !ellipse(26213.369171, 26323.101532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26417.694916, 25375.088806, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 22:45:05 2013] Writing fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src13.gif
[Wed May 22 22:45:06 2013] ../../xmm0091140401/products/events/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src13_src.evt and ../../xmm0091140401/products/events/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src13_bgd.evt exist, delete to re-create
[Wed May 22 22:45:06 2013] Mean detx,y = (613.10, -377.46) 
[Wed May 22 22:45:06 2013] ../../xmm0091140401/products/images/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src13_src.img and ../../xmm0091140401/products/images/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src13_bgd.img exist, delete to re-create
[Wed May 22 22:45:06 2013] ../../xmm0091140401/products/spectra/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src13_src.pi and ../../xmm0091140401/products/spectra/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src13_bgd.pi exist, delete to re-create
[Wed May 22 22:45:06 2013] Setting source spectrum file to fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src13_src.pi.gz
[Wed May 22 22:45:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Wed May 22 22:45:06 2013] ../../xmm0091140401/products/lightcurves/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src13_src.lc and ../../xmm0091140401/products/lightcurves/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src13_bgd.lc exist, delete to re-create
[Wed May 22 22:45:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 22:45:11 2013] rmf not generated due to insufficient counts
[Wed May 22 22:46:14 2013] Updating aperture counts using extracted products
[Wed May 22 22:46:14 2013] Total counts from fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src13_src.pi.gz = 1129.00
[Wed May 22 22:46:14 2013] Total counts from fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src13_bgd.pi.gz = 629.00
[Wed May 22 22:46:14 2013] Got source and background scale factors 1340800.000000, 1814908.000000
[Wed May 22 22:46:14 2013] User source parameters:
  Position = (302.2, 313.2) = 15 32 30.45 4 40 23.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 664.3 +/- 34.6
  Background aperture counts = 464.7
  Rate = 0.02 +/- 0.001

[Wed May 22 22:46:14 2013] Updating counts from extracted products
[Wed May 22 22:46:14 2013] Set source signif. to 664.31/21.56 = 30.82
[Wed May 22 22:46:17 2013] No arf file for this source, not re-computing flux
[Wed May 22 22:46:21 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 22:46:22 2013] xmm0091140401/analysis//spectral/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete