[Wed May 22 22:34:39 2013] Detection parameters:
  Position = (309.2, 324.9) = 15 32 28.40 4 41 16.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 148.5 +/- 19.8
  Background counts = 108.2
  Rate = 0.004 +/- 0.0005

[Wed May 22 22:34:40 2013] Off-axis axis estimate = 2.07'
[Wed May 22 22:35:06 2013] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Wed May 22 22:35:06 2013] Initial guess for spatial extent in simple fitting = 7.47"
[Wed May 22 22:35:06 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.814
[Wed May 22 22:35:06 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 7.47"
[Wed May 22 22:35:07 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src11.ximg exists
[Wed May 22 22:35:07 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed May 22 22:35:07 2013] Fit fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_src11 appears to have run properly
[Wed May 22 22:35:07 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed May 22 22:35:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed May 22 22:35:07 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed May 22 22:35:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed May 22 22:35:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:29 2013] Source 11 is offset by -2.447600 and -1.735961 pixels which is larger than
2 X fitted extent = 0.833232 x 0.833232, not incorporating fit results
[Wed May 22 22:35:29 2013] Warning, spatial fit 11 centroid is now closest to src. 12
[Wed May 22 22:35:29 2013] Vigneting correction estimate = 1.000000
[Wed May 22 22:35:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 22:35:29 2013] Assessing source extent using major
[Wed May 22 22:35:29 2013] Source does appear to be extended
[Wed May 22 22:35:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 22:35:29 2013] Source is confused with source 12
[Wed May 22 22:35:45 2013] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Wed May 22 22:35:45 2013] Initial guess for spatial extent in simple fitting = 7.47"
[Wed May 22 22:35:45 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.814
[Wed May 22 22:35:45 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 7.47"
[Wed May 22 22:35:45 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src11.ximg exists
[Wed May 22 22:35:45 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src11.csv
[Wed May 22 22:35:45 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed May 22 22:35:45 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src11.csv
[Wed May 22 22:35:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:46 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed May 22 22:35:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src11.csv
[Wed May 22 22:35:46 2013] fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed May 22 22:35:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src11.csv
[Wed May 22 22:35:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:36:04 2013] Warning, spatial fit 11 centroid is now closest to src. 14
[Wed May 22 22:36:04 2013] Vigneting correction estimate = 1.000000
[Wed May 22 22:36:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 22:36:04 2013] Assessing source extent using major
[Wed May 22 22:36:04 2013] Source does appear to be extended
[Wed May 22 22:36:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 22:45:05 2013] XMMSAS src. selection expression = ellipse(26853.488770, 28220.401398, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 22:45:05 2013] Not overwriting source region fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src11_src.reg
[Wed May 22 22:45:05 2013] Extracting stamp from image fullrun_mos2_xmm0091140401_pi300-10000_cl_sm2.00.img.gz, (272, 287) - (347, 362)
[Wed May 22 22:45:06 2013] XMMSAS bgd. selection expression = annulus(26853.488770, 28220.401398, 1087.500000, 2175.000000, X, Y) && !ellipse(25739.341000, 27782.003820, 956.224028, 956.224028, 0.000000, X, Y) && !ellipse(26242.003662, 27196.152161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26258.286957, 28558.551239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26858.004974, 27184.390381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27581.561523, 27344.547058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25182.824860, 26510.408539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25900.232361, 28993.572479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25294.584000, 27671.556000, 1138.288033, 1138.288033, 0.000000, X, Y) && !ellipse(26213.369171, 26323.101532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26417.694916, 25375.088806, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 22:45:06 2013] Writing fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src11.gif
[Wed May 22 22:45:06 2013] ../../xmm0091140401/products/events/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0091140401/products/events/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create
[Wed May 22 22:45:06 2013] Mean detx,y = (-132.69, 367.00) 
[Wed May 22 22:45:06 2013] ../../xmm0091140401/products/images/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src11_src.img and ../../xmm0091140401/products/images/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create
[Wed May 22 22:45:06 2013] ../../xmm0091140401/products/spectra/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src11_src.pi and ../../xmm0091140401/products/spectra/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create
[Wed May 22 22:45:06 2013] Setting source spectrum file to fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src11_src.pi.gz
[Wed May 22 22:45:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed May 22 22:45:06 2013] ../../xmm0091140401/products/lightcurves/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0091140401/products/lightcurves/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create
[Wed May 22 22:45:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 22:45:11 2013] rmf not generated due to insufficient counts
[Wed May 22 22:46:14 2013] Updating aperture counts using extracted products
[Wed May 22 22:46:14 2013] Total counts from fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src11_src.pi.gz = 810.00
[Wed May 22 22:46:14 2013] Total counts from fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src11_bgd.pi.gz = 1282.00
[Wed May 22 22:46:15 2013] Got source and background scale factors 1171360.000000, 4593348.000000
[Wed May 22 22:46:15 2013] User source parameters:
  Position = (309.2, 324.9) = 15 32 28.40 4 41 16.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 483.1 +/- 29.5
  Background aperture counts = 326.9
  Rate = 0.01 +/- 0.0008

[Wed May 22 22:46:15 2013] Updating counts from extracted products
[Wed May 22 22:46:15 2013] Set source signif. to 483.07/18.08 = 26.72
[Wed May 22 22:46:17 2013] No arf file for this source, not re-computing flux
[Wed May 22 22:46:21 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 22:46:22 2013] xmm0091140401/analysis//spectral/fullrun_mos2_xmm0091140401_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete