[Wed May 22 22:34:38 2013] Detection parameters:
  Position = (372.0, 313.0) = 15 32 10.14 4 40 20.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 141.3 +/- 17.8
  Background counts = 72.4
  Rate = 0.004 +/- 0.0005

[Wed May 22 22:34:38 2013] Off-axis axis estimate = 5.44'
[Wed May 22 22:35:04 2013] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Wed May 22 22:35:04 2013] Initial guess for spatial extent in simple fitting = 9.15"
[Wed May 22 22:35:04 2013] source mask rpix=2.1, npix_max = 27, mask sum = 34, frac = 1.255
[Wed May 22 22:35:04 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 9.15"
[Wed May 22 22:35:05 2013] fullrun_mos1_xmm0091140401_pi300-10000_cl_pass0_src13.ximg exists
[Wed May 22 22:35:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0091140401_pi300-10000_cl_pass0_src13.csv
[Wed May 22 22:35:05 2013] fullrun_mos1_xmm0091140401_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed May 22 22:35:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0091140401_pi300-10000_cl_pass0_src13.csv
[Wed May 22 22:35:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0091140401_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0091140401_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:06 2013] fullrun_mos1_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed May 22 22:35:06 2013] fullrun_mos1_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed May 22 22:35:06 2013] Fit fullrun_mos1_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Wed May 22 22:35:24 2013] Source 22 is offset by -3.960815 and 7.369709 pixels which is larger than
2 X fitted extent = 1.051333 x 1.051333, not incorporating fit results
[Wed May 22 22:35:24 2013] Vigneting correction estimate = 1.000000
[Wed May 22 22:35:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 22:35:24 2013] Assessing source extent using major
[Wed May 22 22:35:24 2013] Source does appear to be extended
[Wed May 22 22:35:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 22:35:43 2013] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Wed May 22 22:35:43 2013] Initial guess for spatial extent in simple fitting = 9.15"
[Wed May 22 22:35:43 2013] source mask rpix=2.1, npix_max = 27, mask sum = 34, frac = 1.255
[Wed May 22 22:35:43 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 9.15"
[Wed May 22 22:35:44 2013] fullrun_mos1_xmm0091140401_pi300-10000_cl_pass1_src13.ximg exists
[Wed May 22 22:35:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0091140401_pi300-10000_cl_pass1_src13.csv
[Wed May 22 22:35:44 2013] fullrun_mos1_xmm0091140401_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed May 22 22:35:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0091140401_pi300-10000_cl_pass1_src13.csv
[Wed May 22 22:35:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0091140401_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0091140401_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:44 2013] fullrun_mos1_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed May 22 22:35:44 2013] fullrun_mos1_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed May 22 22:35:44 2013] Fit fullrun_mos1_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Wed May 22 22:35:59 2013] Spatial fit model total counts = 317.775000, observed total counts = 312.000000
[Wed May 22 22:35:59 2013] Offset between fit and detection position for source 22 = 0.077124 pixels
[Wed May 22 22:35:59 2013] 317.096800 total counts/ 250.735000 bgd. counts: snr = 4.190933
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.077124 pixels
  Position = (372.0, 312.9) = 15 32 10.14 4 40 21.2
  Extent = 4.0 (3.2-5.3)", rotation angle = 0
  Source counts = 66.4 +/- 17.8
  Background counts = 250.7
  Rate = 0.002 +/- 0.0005
[Wed May 22 22:35:59 2013] Vigneting correction estimate = 1.000000
[Wed May 22 22:35:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 22:35:59 2013] Assessing source extent using major axis lower bound
[Wed May 22 22:35:59 2013] Source does appear to be extended
[Wed May 22 22:35:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 22:44:56 2013] XMMSAS src. selection expression = ellipse(32315.292932, 27172.283000, 239.235007, 239.235007, 0.000000, X, Y)
[Wed May 22 22:44:56 2013] Not overwriting source region fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src22_src.reg
[Wed May 22 22:44:56 2013] Extracting stamp from image fullrun_mos1_xmm0091140401_pi300-10000_cl_sm2.00.img.gz, (358, 299) - (386, 327)
[Wed May 22 22:44:56 2013] XMMSAS bgd. selection expression = annulus(32315.292932, 27172.283000, 398.725011, 797.450023, X, Y)
[Wed May 22 22:44:56 2013] Writing fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src22.gif
[Wed May 22 22:44:57 2013] ../../xmm0091140401/products/events/fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src22_src.evt and ../../xmm0091140401/products/events/fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src22_bgd.evt exist, delete to re-create
[Wed May 22 22:44:57 2013] Mean detx,y = (-1668.24, 5136.85) 
[Wed May 22 22:44:57 2013] ../../xmm0091140401/products/images/fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src22_src.img and ../../xmm0091140401/products/images/fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src22_bgd.img exist, delete to re-create
[Wed May 22 22:44:57 2013] ../../xmm0091140401/products/spectra/fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src22_src.pi and ../../xmm0091140401/products/spectra/fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src22_bgd.pi exist, delete to re-create
[Wed May 22 22:44:57 2013] Setting source spectrum file to fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src22_src.pi.gz
[Wed May 22 22:44:57 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Wed May 22 22:44:57 2013] ../../xmm0091140401/products/lightcurves/fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src22_src.lc and ../../xmm0091140401/products/lightcurves/fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src22_bgd.lc exist, delete to re-create
[Wed May 22 22:45:04 2013] Not generating rmf since there are only 66 counts
[Wed May 22 22:45:04 2013] rmf not generated due to insufficient counts
[Wed May 22 22:46:10 2013] Updating aperture counts using extracted products
[Wed May 22 22:46:10 2013] Total counts from fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src22_src.pi.gz = 91.00
[Wed May 22 22:46:11 2013] Total counts from fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src22_bgd.pi.gz = 185.00
[Wed May 22 22:46:11 2013] Got source and background scale factors 177600.000000, 1438176.000000
[Wed May 22 22:46:11 2013] User source parameters:
  Position = (372.0, 312.9) = 15 32 10.14 4 40 21.2
  Extent = 4.0 (3.2-5.3)", rotation angle = 0
  Source aperture counts = 68.2 +/- 10.6
  Background aperture counts = 22.8
  Rate = 0.002 +/- 0.0003

[Wed May 22 22:46:13 2013] No arf file for this source, not re-computing flux
[Wed May 22 22:46:20 2013] Flag b found in src. 22 procflags, skipping spectral fitting
[Wed May 22 22:46:20 2013] Source 22 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 22 22:46:21 2013] xmm0091140401/analysis//spectral/fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete