[Wed May 22 22:34:38 2013] Detection parameters:
  Position = (311.3, 314.2) = 15 32 27.81 4 40 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.3 +/- 20.0
  Background counts = 99.1
  Rate = 0.002 +/- 0.0005

[Wed May 22 22:34:38 2013] Off-axis axis estimate = 1.47'
[Wed May 22 22:35:04 2013] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Wed May 22 22:35:04 2013] Initial guess for spatial extent in simple fitting = 7.16"
[Wed May 22 22:35:04 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.868
[Wed May 22 22:35:04 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 7.16"
[Wed May 22 22:35:05 2013] fullrun_mos1_xmm0091140401_pi300-10000_cl_pass0_src24.ximg exists
[Wed May 22 22:35:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0091140401_pi300-10000_cl_pass0_src24.csv
[Wed May 22 22:35:05 2013] fullrun_mos1_xmm0091140401_pi300-10000_cl_pass0_src24_1.ximg exists
[Wed May 22 22:35:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0091140401_pi300-10000_cl_pass0_src24.csv
[Wed May 22 22:35:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0091140401_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0091140401_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:06 2013] fullrun_mos1_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Wed May 22 22:35:06 2013] fullrun_mos1_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Wed May 22 22:35:06 2013] Fit fullrun_mos1_xmm0091140401_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Wed May 22 22:35:24 2013] Source 21 is offset by -3.021991 and 4.614142 pixels which is larger than
2 X fitted extent = 0.823582 x 0.823582, not incorporating fit results
[Wed May 22 22:35:24 2013] Vigneting correction estimate = 1.000000
[Wed May 22 22:35:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 22:35:24 2013] Assessing source extent using major
[Wed May 22 22:35:24 2013] Source does appear to be extended
[Wed May 22 22:35:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 22:35:24 2013] Source is confused with source 19
[Wed May 22 22:35:43 2013] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Wed May 22 22:35:43 2013] Initial guess for spatial extent in simple fitting = 7.16"
[Wed May 22 22:35:43 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.868
[Wed May 22 22:35:43 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 7.16"
[Wed May 22 22:35:44 2013] fullrun_mos1_xmm0091140401_pi300-10000_cl_pass1_src24.ximg exists
[Wed May 22 22:35:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0091140401_pi300-10000_cl_pass1_src24.csv
[Wed May 22 22:35:44 2013] fullrun_mos1_xmm0091140401_pi300-10000_cl_pass1_src24_1.ximg exists
[Wed May 22 22:35:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0091140401_pi300-10000_cl_pass1_src24.csv
[Wed May 22 22:35:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0091140401_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0091140401_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 22:35:44 2013] fullrun_mos1_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Wed May 22 22:35:45 2013] fullrun_mos1_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Wed May 22 22:35:45 2013] Fit fullrun_mos1_xmm0091140401_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Wed May 22 22:35:59 2013] Source 21 is offset by -3.048290 and 4.599751 pixels which is larger than
2 X fitted extent = 0.823508 x 0.823508, not incorporating fit results
[Wed May 22 22:35:59 2013] Vigneting correction estimate = 1.000000
[Wed May 22 22:35:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 22:35:59 2013] Assessing source extent using major
[Wed May 22 22:35:59 2013] Source does appear to be extended
[Wed May 22 22:35:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 22:44:56 2013] XMMSAS src. selection expression = ellipse(27031.144745, 27284.782349, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 22:44:56 2013] Not overwriting source region fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src21_src.reg
[Wed May 22 22:44:56 2013] Extracting stamp from image fullrun_mos1_xmm0091140401_pi300-10000_cl_sm2.00.img.gz, (274, 277) - (349, 352)
[Wed May 22 22:44:56 2013] XMMSAS bgd. selection expression = annulus(27031.144745, 27284.782349, 1087.500000, 2175.000000, X, Y) && !ellipse(25792.486000, 27646.938000, 1102.880032, 1102.880032, 0.000000, X, Y) && !ellipse(26063.612244, 27020.190094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25997.502000, 28130.164000, 2374.424068, 2374.424068, 0.000000, X, Y) && !ellipse(25844.253723, 28823.268280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25587.522000, 27564.648000, 1112.296032, 1112.296032, 0.000000, X, Y) && !ellipse(27085.630000, 28915.792000, 1204.120035, 1204.120035, 0.000000, X, Y) && !ellipse(24353.278000, 28443.598000, 2431.520070, 2431.520070, 0.000000, X, Y) && !ellipse(25192.932556, 26942.647308, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 22:44:56 2013] Writing fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src21.gif
[Wed May 22 22:44:58 2013] ../../xmm0091140401/products/events/fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src21_src.evt and ../../xmm0091140401/products/events/fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src21_bgd.evt exist, delete to re-create
[Wed May 22 22:44:58 2013] Mean detx,y = (-271.07, -7.22) 
[Wed May 22 22:44:58 2013] ../../xmm0091140401/products/images/fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src21_src.img and ../../xmm0091140401/products/images/fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src21_bgd.img exist, delete to re-create
[Wed May 22 22:44:58 2013] ../../xmm0091140401/products/spectra/fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src21_src.pi and ../../xmm0091140401/products/spectra/fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src21_bgd.pi exist, delete to re-create
[Wed May 22 22:44:58 2013] Setting source spectrum file to fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src21_src.pi.gz
[Wed May 22 22:44:58 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Wed May 22 22:44:58 2013] ../../xmm0091140401/products/lightcurves/fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src21_src.lc and ../../xmm0091140401/products/lightcurves/fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src21_bgd.lc exist, delete to re-create
[Wed May 22 22:45:05 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 22:45:05 2013] rmf not generated due to insufficient counts
[Wed May 22 22:46:12 2013] Updating aperture counts using extracted products
[Wed May 22 22:46:12 2013] Total counts from fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src21_src.pi.gz = 790.00
[Wed May 22 22:46:12 2013] Total counts from fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src21_bgd.pi.gz = 1308.00
[Wed May 22 22:46:12 2013] Got source and background scale factors 1331200.000000, 4580868.000000
[Wed May 22 22:46:12 2013] User source parameters:
  Position = (311.3, 314.2) = 15 32 27.81 4 40 25.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 409.9 +/- 29.1
  Background aperture counts = 380.1
  Rate = 0.01 +/- 0.0008

[Wed May 22 22:46:12 2013] Updating counts from extracted products
[Wed May 22 22:46:12 2013] Set source signif. to 409.90/19.50 = 21.02
[Wed May 22 22:46:13 2013] No arf file for this source, not re-computing flux
[Wed May 22 22:46:20 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 22:46:21 2013] xmm0091140401/analysis//spectral/fullrun_mos1_xmm0091140401_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete