[Tue May 22 23:15:09 2012] Detection parameters:
  Position = (248.2, 231.1) = 14 52 56.08 16 41 28.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 403.0 +/- 31.6
  Background counts = 138.4
  Rate = 0.02 +/- 0.002

[Tue May 22 23:15:11 2012] Off-axis axis estimate = 6.09'
[Tue May 22 23:19:25 2012] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting
[Tue May 22 23:19:25 2012] Initial guess for spatial extent in simple fitting = 9.47"
[Tue May 22 23:19:25 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.046
[Tue May 22 23:19:25 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 9.47"
[Wed May 23 02:31:41 2012] fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_src9.ximg exists
[Wed May 23 02:31:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_src9.csv
[Wed May 23 02:31:41 2012] fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed May 23 02:31:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_src9.csv
[Wed May 23 02:31:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 02:31:42 2012] fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed May 23 02:31:42 2012] fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed May 23 02:31:42 2012] Fit fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed May 23 07:19:47 2012] Spatial fit model total counts = 4223.450000, observed total counts = 4214.000000
[Wed May 23 07:19:47 2012] Offset between fit and detection position for source 9 = 7.514428 pixels
[Wed May 23 07:19:47 2012] 4211.920000 total counts/ 3791.500000 bgd. counts: snr = 6.827754
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 7.514428 pixels
  Position = (245.3, 224.1) = 14 52 56.96 16 40 58.5
  Extent = 18.9 (18.9-37.9)", rotation angle = 0
  Source counts = 420.4 +/- 64.9
  Background counts = 3791.5
  Rate = 0.02 +/- 0.002
[Wed May 23 07:19:47 2012] Spatial fit model total counts = 2477.760000, observed total counts = 1998.000000
[Wed May 23 07:19:47 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 23 07:19:47 2012] Source 9 is offset by -1.859011 and -2.166023 pixels which is larger than
2 X fitted extent = 8.356828 x 2.009453, not incorporating fit results
[Wed May 23 07:19:47 2012] Vigneting correction estimate = 1.000000
[Wed May 23 07:19:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 07:19:47 2012] Assessing source extent using major axis lower bound
[Wed May 23 07:19:47 2012] Source does appear to be extended
[Wed May 23 07:19:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 07:19:47 2012] Source is confused with source 50
[Wed May 23 07:19:47 2012] Source is confused with source 51
[Wed May 23 07:19:47 2012] Source is confused with source 52
[Wed May 23 07:19:47 2012] Source is confused with source 54
[Wed May 23 07:20:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 23 07:20:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 23 07:20:31 2012] Initial guess for spatial extent in simple fitting = 18.95"
[Wed May 23 07:20:31 2012] source mask rpix=4.4, npix_max = 94, mask sum = 100, frac = 1.060
[Wed May 23 07:20:31 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 18.95"
[Wed May 23 09:24:18 2012] fullrun_pn_xmm0091140201_pi300-10000_cl_pass1_src9.ximg exists
[Wed May 23 09:24:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140201_pi300-10000_cl_pass1_src9.csv
[Wed May 23 09:24:18 2012] fullrun_pn_xmm0091140201_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed May 23 09:24:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140201_pi300-10000_cl_pass1_src9.csv
[Wed May 23 09:24:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0091140201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0091140201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 09:24:19 2012] fullrun_pn_xmm0091140201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed May 23 09:24:19 2012] fullrun_pn_xmm0091140201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed May 23 09:24:19 2012] Fit fullrun_pn_xmm0091140201_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed May 23 15:10:51 2012] Warning, spatial fit 9 centroid is now closest to src. 54
[Wed May 23 15:10:51 2012] Spatial fit model total counts = 2481.170000, observed total counts = 1998.000000
[Wed May 23 15:10:51 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 23 15:10:51 2012] Vigneting correction estimate = 1.000000
[Wed May 23 15:10:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 15:10:51 2012] Assessing source extent using major axis lower bound
[Wed May 23 15:10:51 2012] Source does appear to be extended
[Wed May 23 15:10:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 15:11:33 2012] XMMSAS src. selection expression = ellipse(21295.948000, 19450.926000, 1136.928033, 1136.928033, 0.000000, X, Y)
[Wed May 23 15:11:33 2012] Writing source region out to fullrun_pn_xmm0091140201_pi300-10000_pass1_cl_src9_src.reg
[Wed May 23 15:11:33 2012] Extracting stamp from image fullrun_pn_xmm0091140201_pi300-10000_cl_sm2.00.img.gz, (180, 159) - (311, 289)
[Wed May 23 15:11:33 2012] XMMSAS bgd. selection expression = annulus(21295.948000, 19450.926000, 1894.880055, 3789.760109, X, Y) && !ellipse(21784.070084, 20841.894440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23899.118195, 22640.828125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20675.573240, 21464.846800, 591.445617, 591.445617, 0.000000, X, Y) && !ellipse(17875.843200, 20458.809400, 439.306413, 439.306413, 0.000000, X, Y) && !ellipse(21217.672684, 23032.049347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18859.076080, 22813.017395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22629.092896, 22226.874542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19816.775681, 21910.784012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19759.992569, 21518.557861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22852.402100, 21275.274872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18685.551331, 20846.200897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19550.062057, 20668.766617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23977.529175, 20653.013000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20345.690310, 20400.461718, 1403.293721, 374.941225, 90.000000, X, Y) && !ellipse(22881.387054, 20664.842484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19775.869644, 19694.344315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22130.264664, 19366.412354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20692.738876, 19105.891586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18111.170000, 18446.095600, 529.940815, 529.940815, 0.000000, X, Y) && !ellipse(20674.944000, 18036.108000, 3031.808087, 3031.808087, 0.000000, X, Y) && !ellipse(24601.851349, 17202.672333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20315.731354, 16247.509613, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 23 15:11:33 2012] Writing fullrun_pn_xmm0091140201_pi300-10000_pass1_cl_src9.gif
[Wed May 23 15:22:13 2012] Mean detx,y = (4468.14, -4017.09) 
[Wed May 23 15:22:19 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 15:22:43 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 15:22:44 2012] Setting source spectrum file to fullrun_pn_xmm0091140201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed May 23 15:22:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0091140201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Wed May 23 18:51:10 2012] Updating aperture counts using extracted products
[Wed May 23 18:51:10 2012] Error reading totcts from fullrun_pn_xmm0091140201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed May 23 18:51:13 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 18:51:13 2012] Using photon index=1.80, rate=0.015, arf fullrun_pn_xmm0091140201_pi300-10000_pass1_cl_src9.arf
[Wed May 23 18:51:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 18:51:14 2012] Updating source flux to 4.3e-14
[Wed May 23 18:55:24 2012] Flag b found in src. 9 procflags, skipping spectral fitting
[Wed May 23 18:55:24 2012] Flag p found in src. 9 procflags, skipping spectral fitting
[Wed May 23 18:55:24 2012] Flag c found in src. 9 procflags, skipping spectral fitting