[Tue May 22 23:15:11 2012] Detection parameters:
  Position = (243.4, 212.8) = 14 52 57.54 16 40 10.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.1 +/- 18.4
  Background counts = 119.1
  Rate = 0.004 +/- 0.001

[Tue May 22 23:15:11 2012] Off-axis axis estimate = 7.38'
[Tue May 22 23:19:25 2012] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Tue May 22 23:19:25 2012] Initial guess for spatial extent in simple fitting = 10.12"
[Tue May 22 23:19:25 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.939
[Tue May 22 23:19:25 2012] Giving source the simple spatial ID 52 for pass 0, mean size = 10.12"
[Wed May 23 02:31:42 2012] fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_src52.ximg exists
[Wed May 23 02:31:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_src52.csv
[Wed May 23 02:31:42 2012] fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_src52_1.ximg exists
[Wed May 23 02:31:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_src52.csv
[Wed May 23 02:31:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 02:31:43 2012] fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Wed May 23 02:31:43 2012] fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Wed May 23 02:31:43 2012] Fit fullrun_pn_xmm0091140201_pi300-10000_cl_pass0_tfrozen_src52 appears to have run properly
[Wed May 23 07:19:47 2012] Source 54 is offset by 4.910288 and 5.002640 pixels which is larger than
2 X fitted extent = 1.278694 x 1.278694, not incorporating fit results
[Wed May 23 07:19:47 2012] Vigneting correction estimate = 1.000000
[Wed May 23 07:19:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 07:19:47 2012] Assessing source extent using major
[Wed May 23 07:19:47 2012] Source does appear to be extended
[Wed May 23 07:19:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 07:19:47 2012] Source is confused with source 9
[Wed May 23 07:20:31 2012] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Wed May 23 07:20:31 2012] Initial guess for spatial extent in simple fitting = 10.12"
[Wed May 23 07:20:31 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.939
[Wed May 23 07:20:31 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 10.12"
[Wed May 23 09:24:19 2012] fullrun_pn_xmm0091140201_pi300-10000_cl_pass1_src41.ximg exists
[Wed May 23 09:24:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140201_pi300-10000_cl_pass1_src41.csv
[Wed May 23 09:24:19 2012] fullrun_pn_xmm0091140201_pi300-10000_cl_pass1_src41_1.ximg exists
[Wed May 23 09:24:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0091140201_pi300-10000_cl_pass1_src41.csv
[Wed May 23 09:24:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0091140201_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0091140201_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 09:24:20 2012] fullrun_pn_xmm0091140201_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Wed May 23 09:24:20 2012] fullrun_pn_xmm0091140201_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Wed May 23 09:24:20 2012] Fit fullrun_pn_xmm0091140201_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Wed May 23 15:10:51 2012] Spatial fit model total counts = 7117.750000, observed total counts = 7040.000000
[Wed May 23 15:10:51 2012] Offset between fit and detection position for source 54 = 7.143935 pixels
[Wed May 23 15:10:51 2012] Warning, changing simple spatial fit ID from 41 to 9
[Wed May 23 15:10:51 2012] 7318.060000 total counts/ 6243.780000 bgd. counts: snr = 13.595453
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 7.143935 pixels
  Position = (238.2, 207.9) = 14 52 59.11 16 39 47.8
  Extent = 37.9 (37.9-75.8)", rotation angle = 0
  Source counts = 1074.3 +/- 85.5
  Background counts = 6243.8
  Rate = 0.04 +/- 0.003
[Wed May 23 15:10:51 2012] Source 54 is offset by -5.536805 and -3.931540 pixels which is larger than
2 X fitted extent = 2.964147 x 2.964147, not incorporating fit results
[Wed May 23 15:10:51 2012] Source 54 is offset by 2.703977 and 4.027793 pixels which is larger than
2 X fitted extent = 1.163200 x 1.163200, not incorporating fit results
[Wed May 23 15:10:51 2012] Vigneting correction estimate = 1.000000
[Wed May 23 15:10:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 15:10:51 2012] Assessing source extent using major axis lower bound
[Wed May 23 15:10:51 2012] Source does appear to be extended
[Wed May 23 15:10:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 15:11:34 2012] Counts = 1074.280000, rescaling region sizes by 2.000000
[Wed May 23 15:11:34 2012] XMMSAS src. selection expression = ellipse(20674.944000, 18036.108000, 4547.712131, 4547.712131, 0.000000, X, Y)
[Wed May 23 15:11:34 2012] Writing source region out to fullrun_pn_xmm0091140201_pi300-10000_pass1_cl_src54_src.reg
[Wed May 23 15:11:34 2012] Extracting stamp from image fullrun_pn_xmm0091140201_pi300-10000_cl_sm2.00.img.gz, (0, 0) - (500, 469)
[Wed May 23 15:11:34 2012] XMMSAS bgd. selection expression = annulus(20674.944000, 18036.108000, 15159.040436, 30318.080872, X, Y) && !ellipse(21784.070084, 20841.894440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42236.085999, 14661.201294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33247.566620, 13172.154663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36452.788000, 32354.958000, 413.669612, 413.669612, 0.000000, X, Y) && !ellipse(30345.287720, 31282.385620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23899.118195, 22640.828125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20675.573240, 21464.846800, 591.445617, 591.445617, 0.000000, X, Y) && !ellipse(17875.843200, 20458.809400, 439.306413, 439.306413, 0.000000, X, Y) && !ellipse(21295.948000, 19450.926000, 1515.904044, 1515.904044, 0.000000, X, Y) && !ellipse(37884.952301, 36129.927490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31582.369415, 37014.869995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25486.005310, 36939.565399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36201.613281, 32831.165100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35104.042755, 32554.189789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21023.955109, 30564.545349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29920.591888, 29788.352844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24318.685020, 29244.936200, 411.618412, 411.618412, 0.000000, X, Y) && !ellipse(27108.156525, 28579.738373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17075.221634, 28168.392029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38949.061493, 27898.378204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28164.605957, 26234.381073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20857.981262, 25335.042999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21217.672684, 23032.049347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18859.076080, 22813.017395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22629.092896, 22226.874542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19816.775681, 21910.784012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19759.992569, 21518.557861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22852.402100, 21275.274872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18685.551331, 20846.200897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19550.062057, 20668.766617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23977.529175, 20653.013000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20345.690310, 20400.461718, 1403.293721, 374.941225, 90.000000, X, Y) && !ellipse(22881.387054, 20664.842484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27571.573303, 19802.771729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19775.869644, 19694.344315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22130.264664, 19366.412354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20692.738876, 19105.891586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18111.170000, 18446.095600, 529.940815, 529.940815, 0.000000, X, Y) && !ellipse(24601.851349, 17202.672333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20315.731354, 16247.509613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27111.770020, 9347.576996, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 23 15:11:34 2012] Writing fullrun_pn_xmm0091140201_pi300-10000_pass1_cl_src54.gif
[Wed May 23 15:48:36 2012] Mean detx,y = (4849.64, -4360.80) 
[Wed May 23 15:48:46 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 16:02:42 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 16:02:42 2012] Setting source spectrum file to fullrun_pn_xmm0091140201_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Wed May 23 16:02:42 2012] Setting bgd. spectrum file to fullrun_pn_xmm0091140201_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Wed May 23 18:51:13 2012] Updating aperture counts using extracted products
[Wed May 23 18:51:13 2012] Error reading totcts from fullrun_pn_xmm0091140201_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Wed May 23 18:51:15 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 18:51:15 2012] Using photon index=1.80, rate=0.0384, arf fullrun_pn_xmm0091140201_pi300-10000_pass1_cl_src54.arf
[Wed May 23 18:51:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 18:51:15 2012] Updating source flux to 1e-13
[Wed May 23 18:55:24 2012] Flag b found in src. 54 procflags, skipping spectral fitting
[Wed May 23 18:55:24 2012] Flag c found in src. 54 procflags, skipping spectral fitting